Dynamic induction machine modelling considering the stray load losses

39th International Universities Power Engineering Conference, UPEC 2004 - Conference Proceedings

Volumn 2, Issue , 2004, Pages 582-586

  Lamine, A ^a   Levi, E ^a  

^a LIVERPOOL JOHN MOORES UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL EQUIPMENT; ELECTRIC INVERTERS; ELECTRIC POTENTIAL; PULSE WIDTH MODULATION; VECTORS;

DYNAMIC INDUCTION MACHINE; STRAY LOAD LOSSES; SUPPLY VOLTAGE; VECTOR CONTROLLERS;

ASYNCHRONOUS MACHINERY;

EID: 32044440564     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (34)

1. E.Levi; Magnetic variables control, in Wiley Encyclopaedia of Electrical und Electronics Engineering, ed. J.G. Webster, John Wiley and Sons, 1999, vol. 12, pp. 242-260.
2. E.Levi; Impact of iron loss on behaviour of vector controlled induction machines. IEEE Trans. on Industry Applications, vol. 31, 1995, pp. 1287-1296.
3. [31 E.Levi, M.Sokola, A.Boglietti, M.Pastorelli: Iron loss in rotor flux oriented induction machines: Identification, assessment of detuning, and compensation. IEEE Trans. on Power Electronics, vol. 11, no. 5, 1996, pp. 698-707.
4. nd Edition, Gordon and Breach, New York, 1995.
5. M.Popescu, D.M.Jonel, D.G.Dorrelll Vector control of unsymmetrical two-phase induction machines, Proc. IEEE Int. Elec. Mach. & Drives Conf. IEMDC, Cambridge, MA. 2001, pp. 95-101.
6. N.Urasaki, T.Senjyu, K.Uezato; Investigation of the influence of various losses on electromagnetic torque for surface-mounted permanent magnet synchronous motors, IEEE Trans. on Power Electronics, vol. 18, no. 1, 2003, pp. 131-139.
7. A.A.Jimoh, R.D.Findlay, M.Poloujadoff; Stray losses in induction machines: Part 1, definition, origin and measurement, IEEE Trans. on Power Apparatus and Systems, vol. PAS-104, no. 6, 1985, pp. 1500-1505.
8. K.Yamazaki; Stray load loss analysis of induction motors due to harmonic electromagnetic fields of stator and rotor. Proc. Int. Conf. on Elec. Machines ICEM. Bruges. Belgium, 2002. CD-ROM Paper No. 278.
9. R.Romary, J.Ninet, J.F.Brudny; Procedures to analyse the slotting effect contribution in the total iron losses of induction machine. Proc. IEEE Int. Elec. Machines and Drives Conf. IEMDC, Cambridge, MA. 2001, pp. 280-284.
10. R.Carlson, C.A. da Silva, N.Sadowski, Y.Lefevre, M.Lajoie-Muzenc; Analysis of the effect of inter-bar currents on the performance of polyphase cage-induction motors. Proc. IEEE Int. Elec. Machines and Drive Conf. IEMDC, Cambridge, MA. 2001, pp. 404-409.
11. L.Dupre, M.De Wulf, D.Makaveev, V.Permiakov, A.Pulnikov, J.Melkebeek; Evaluation of electromagnetic losses in electrical machines, Proc. Int. Conf. on Elec. Machines ICEM, Bruges. Belgium, 2002, CD-ROM Paper No. 524.
12. K.Yamazaki; Efficiency analysis of induction motor considering rotor and stator surface loss caused by rotor movement. Int. J. of Applied Electromagnetics and Mechanics, vol. 13, 2001/2002, pp. 229-234.
13. L.Ma, M.Sanada, S.Morimoto, Y.Takeda: Iron loss prediction considering the rotating field and flux densiu harmonics in IPMSM and SynRM. IEE Proc. - Electr. Power Appl., vol. 150, no. 6, 2003, pp. 747-751.
14. B.J.Chalmers, B.R.Sarkar Induction-motor losses due to nonsinusoidal supply waveformes. Proc. IEE. vol. 1 15, no. 12, 1968, pp. 1777-1782.
15. G.Rakotonirina, J.Xu, A.Sevigny, P.Sicard: Thermal effects of nonsinusoidal supply on three-phase induction motor behaviour. Proc. Electrimacs. Montreal. Canada, 2002, CD-ROM Paper No. 197.
16. B.Renier, K.Hameyer, R.Belmans; Comparison of standards for determining efficiency of three phase induction motors, IEEE Trans. on Energy Conv., vol. 14, no. 3, 1999, pp. 512-517.
17. S.Derrah, R.D.Findlay, R.Ong; A statistical procedure for analysing stray losses in induction motors from measurement,Proc. IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary, 2001, pp. 1801-1806.
18. K.J.Bradley, W.Cao: Evaluation of stray load loss in induction motors, a comparison of input-output and calorimetric methods. Proc. IEEE Ind. Appl. Soc. Annual Meeting IAS'2001, Chicago, IL, 2001, CD-ROM Paper No. 17_06.
19. K.J.Bradley, A.Ferrah, R.Magill, J.C.Clare, P.Wheeler, P.Sewell; Improvements to precision measurement of stray load loss by calorimeter. Poc. IEE Int. Conf. on Elec. Machines and Drives EMD, IHE Conf. Pub. No. 469/1999, pp. 189-193.
20. K.Yamazaki; Efficiency analysis of induction motors for ammonia compressors considering stray load losses caused by stator and rotor slot ripple. Proc. IEEE Ind. Appl. Soc. Annual Meeting IAS, Chicago, IL, 2001, CD-ROM Paper No. 17_07.
21. K.Yamazaki, Y.Haruishi; Stray load loss analysis of induction motor - comparison of measurement due to IEEE standard 112 and direct calculation by finite element method. Proc. IEEE Int. Elec. Mach. & Drives Conf. IEMDC. Madison. WI. 2003, pp. 285-290.
22. A.Boglietti, A.Cavagnino, M.Lazzari, M.Pastorelli; Induction motor efficiency measurements in accordance to IEEE 112-B, IEC 34-2 and JEC 37 international standards. Proc. IEEE Int. Elec. Mach. & Drives Conf. IEMDC, Madison. WI, 2003, pp. 1599-1605.
23. A.Boglietti, A.Cavagnino, M.Lazzari, M.Pastorelli; International standards for the induction motor efficiency evaluation: a critical analysis of the stray-load loss determination. Proc. IEEE Ind. Appl. Soc. Annual Meeting IAS, Salt Lake City, Utah. 2003, CD-ROM Paper No. 031AS24-1.
24. A.T.de Almeida, F.J.T.E Ferreira, J.F.Busch, P.Angers: Comparative analysis of IEEE 112-B and IEC 34-2 efficiency testing standards using stray load losses in low-voltage three-phase, cage induction motors. IEEE Trans. on Industry Applications, vol. 38, no. 2, 2002, pp. 608-614.
25. A.K.Wallace, A. von Jouanne, A.Nagorny, Evaluation of stray losses in induction motors at different supply frequencies. Proc. IEEE Int. Appl. Soc. Annual Meeting IAS. Pittsburg, PA, 2002, CD-ROM Paper No. 58P6.
26. V.B.Honsinger, Induction motors operating from inverters. Proc. IEEE Ind. Appl. Soc. Annu. Meeting IAS, Cincinnati, OH, 1980, pp. 1276-1285.
27. I.Kioskeridis, N.Margaris; Loss minimization in induction motor adjustable-speed drives. IEEE Trans, on Industrial Electronics, vol.43, no. 1, 1996, pp. 226-231.
28. K.Venkatasen, J.F.Lindsay; Comparative study of the losses in voltage and current source inverter fed induction motors, IEEE Trans. on Ind. Applicat., vol. 1A-18, no. 3, 1982, pp. 240-246.
29. S.A.Eldhemy, A.A.Mohamed, S.S.Shokralla; Calculation of additional losses caused by feeding and induction motor from a non-sinusoidal supply. Int. J. Electr. Enging. Education, vol. 32, 1995, pp. 51-62.
30. G.C.D.Sousa, B.K.Bose; Loss modelling of converter induction machine system for variable speed drive. IEEE Ind. Elec. Soc. Annu. Meeting IECON. San Diego, CA. 1992, pp. 114-120.
31. A.Vamvakari, A.Kandianis, A.Kladas, S.Manias, J.Tegopoulos; Analysis of supply voltage distortion effects on induction motor operation. IEEE Trans. on Energy Conversion, vol. 16, no. 3, 2001, pp. 209-213.
32. Z. Papazacharopoulos, A.G.Kladas, S.N.Manias: Investigation of the switching frequency harmonics impact on PWM induction motor drive efficiency, Proc. IEEE Power Elec. Spec. Conf. PESC 2001. Vancouver, Canada, 2001, pp. 1203-1208.
33. Z.Papazacharopoulos, K.Tatis, A.Kladas, S.Manias: Dynamic induction motor model for non-sinusoidal supply. Proc. IEEE Power Electronics Spec Conf. PESC. Cairns, Australia, 2002, CD-ROM Paper No, 10253.
34. K.Talis, A.Kladas, J.Tegopoulos: Harmonic iron losses determination in inverter-fed induction motors. Proc. Int. Elec. Machines Conf. ICEM. Bruges. Belgium. 2002. CD-ROM Paper No. 539.