Asymmetric membranes of modified poly(ether ether ketone) with an ultra-thin skin for gas and vapour separations

Journal of Membrane Science

Volumn 272, Issue 1-2, 2006, Pages 188-197

  Jansen, Johannes Carolus ^a   Buonomenna, Maria Giovanna ^b   Figoli, Alberto ^a   Drioli, Enrico ^a,b  

^a INSTITUTE ON MEMBRANE TECHNOLOGY   (Italy)

^b UNIVERSITY OF CALABRIA   (Italy)

Author keywords

Dry wet phase inversion; Gas separation; PEEKWC; Pervaporation; Poly(ether ether ketone)

Indexed keywords

CONCENTRATION (PROCESS); GASES; NITROGEN; OXYGEN; POLYETHER ETHER KETONES; SEPARATION; VAPORS;

DRY-WET PHASE INVERSION; GAS SEPARATION; PEEKWC; POLY(ETHER ETHER KETONE);

POLYMERIC MEMBRANES;

CARBON DIOXIDE; HELIUM; KETONE DERIVATIVE; METHANE; NITROGEN; OXYGEN; POLY(ETHER ETHER KETONE); POLYMER; SILICONE; UNCLASSIFIED DRUG; WATER;

CONCENTRATION (PROCESS); GASES; NITROGEN; OXYGEN; POLYETHER ETHER KETONES; POLYMERIC MEMBRANES; SEPARATION; VAPORS;

ARTICLE; CHEMICAL STRUCTURE; EVAPORATION; GAS; GAS PERMEABILITY; PERVAPORATION; PRIORITY JOURNAL; SEPARATION TECHNIQUE; SKINFOLD THICKNESS; TEMPERATURE; VAPOR;

EID: 31744447035     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2005.07.036     Document Type: Article

References (46)

1. L.M. Robeson Correlation of separation factor versus permeability for polymeric membranes J. Membr. Sci. 62 1991 165
2. H. Strathmann Synthetic membranes and their preparation P.M. Bungay H.K. Lonsdale M.N. De Pinho Synthetic Membranes: Science, Engineering and Applications 1986 D. Riedel Publishers Dordrecht 1 38
3. W.J. Koros, and G.K. Fleming Membrane based gas separation J. Membr. Sci. 83 1993 1 80
4. J. Kurdy, and A.Y. Tremblay The influence of casting solution structure on the microporosity of polyether imide gas separation membranes prepared by the coagulation post-leaching method J. Membr. Sci. 184 2001 175 186
5. J. Kurdy, and A.Y. Tremblay Preparation of defect free asymmetric membranes for gas separations J. Appl. Polym. Sci. 73 1999 1471 1482
6. D.R. Paul, and Y.P. Yampol'skii Introduction and perspective D.R. Paul Y.P. Yampol'skii Polymeric Gas Separation Membranes 1994 CRC Press Boca Raton 1 15
7. W.J. Koros, and I. Pinnau Membrane formation for gas separation processes D.R. Paul Y.P. Yampol'skii Polymeric Gas Separation Membranes 1994 CRC Press Boca Raton 209 271
8. R. Datta, S. Dechapanichkul, J.S. Kim, L.Y. Fang, and H. Uehara A generalised model for the transport of gases in porous, nonporous and leaky membranes. Part I. Application to single gases J. Membr. Sci. 75 1992 245 263
9. C.A. Smolders, A.J. Reuvers, R.M. Boom, and I.M. Wienk Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids J. Membr. Sci. 73 1992 259 275
10. M. Mulder Basic Principles of Membrane Technology 2nd ed. 1996 Kluwer Academic Publishers Dordrecht
11. J.C. Jansen, M. Macchione, and E. Drioli High flux asymmetric gas separation membranes of modified poly(ether ether ketone) prepared by the dry phase inversion technique J. Membr. Sci. 255 2005 167 180
12. M.G. Buonomenna, A. Figoli, J.C. Jansen, and E. Drioli Preparation of asymmetric PEEKWC flat membranes with different microstructures by wet phase inversion J. Appl. Polym. Sci. 92 2004 576 591
13. M.G. Buonomenna, A. Figoli, J.C. Jansen, M. Davoli, and E. Drioli Asymmetric membranes with controlled morphology from modified poly(ether ether ketone) (PEEKWC): preparation and characterization V.N. Burganos R.D. Noble M. Asaeda A. Aryal J.D. LeRoux MRS Proceedings on the Membranes-Preparation, Properties and Applications, vol. 752 2003 3 8
14. F. Tasselli, J.C. Jansen, and E. Drioli PEEKWC ultrafiltration hollow fibre membranes: preparation, morphology and transport properties J. Appl. Polym. Sci. 91 2004 841 853
15. F. Tasselli, J.C. Jansen, F. Sidari, and E. Drioli Morphology and transport property control of modified poly(ether ether ketone) (PEEKWC) hollow fiber membranes prepared from PEEKWC/PVP blends. Influence of the relative humidity in the air gap J. Membr. Sci. 255 2005 13 22
16. M. Macchione, J.C. Jansen, E. Drioli, The dry phase inversion technique as a tool to produce highly efficient asymmetric gas separation membranes of modified PEEK. Influence of temperature and air circulation. Desalination, in press.
17. Z. Wang, T. Chen, and J. Xu Novel poly(aryl ether ketone)s containing various pendant groups. II. Gas transport properties J. Appl. Polym. Sci. 64 1997 1725 1732
18. F. Lufrano, E. Drioli, G. Golemme, and L. Di Giorgio Transport parameters of carbon dioxide in poly(ether ether ketone) membranes J. Membr. Sci. 113 1996 121 129
19. E. Drioli, and H.C. Zhang A study of poly(ether ether ketone) and polyarylsulfone ultrafiltration membranes Chim. Oggi 11 1989 59 63
20. H. Matsuyama, M. Teramoto, and T. Uesaka Membrane formation and structure development by dry cast process J. Membr. Sci. 135 1997 271
21. P.S. Tin, T.S. Chung, Y. Liu, R. Wang, S.L. Liu, and K.P. Pramoda Effects of cross-linking modification on gas separation membranes J. Membr. Sci. 225 2003 77 90
22. Z. Pientka, L. Brožová, M. Bleha, and P. Puri Preparation and characterization of ultra-thin polymeric films J. Membr. Sci. 214 2003 157 161
23. A.F. Ismail, and P.Y. Lai Effects of phase inversion and rheological factors on formation of defect-free and ultra-thin-skinned asymmetric polysulfone membranes for gas separation Sep. Purif. Technol. 33 2003 127 143
24. A. Yamasaki, R.K. Tyagi, A.E. Fouda, T. Matsuura, and K. Jonasson Effect of gelation conditions on gas separation performance for asymmetric polysulfone membranes J. Membr. Sci. 123 1997 89 94
25. Y. Li, C. Cao, T.-S. Chung, and K.P. Pramoda Fabrication of dual-layer polyethersulfone (PES) hollow fiber membranes with an ultra-thin dense-selective layer for gas separation J. Membr. Sci. 245 2004 53 60
26. I. Pinnau, and W.J. Koros Structures and gas separation properties of asymmetric polysulfone membranes made by dry, wet and dry/wet phase inversion J. Appl. Polym. Sci. 43 1991 1491 1502
27. M.H.V. Mulder, J. Oude Hendrikman, J.G. Wijmans, and C.A. Smolders A rationale for the preparation of asymmetric pervaporation membranes J. Appl. Polym. Sci. 30 1985 2805
28. J.G. Wijmans, J. Kant, M.H.V. Mulder, and C.A. Smolders Phase separation phenomena in solutions of polysulfone in a mixture of a solvent and a nonsolvent: relationship with membrane formation Polymer 26 1985 1539 1545
29. J.-Y. Lai, M.J. Liu, and K.R. Lee Polycarbonate membrane prepared via a wet phase inversion method for oxygen enrichment from air J. Membr. Sci. 86 1994 103 118
30. P. Radovanovic, S.W. Thiel, and S.T. Hwang Formation of asymmetric polysulfone membranes by immersion precipitation. Part II. The effects of casting solution and gelation bath composition on membrane structure and skin formation J. Membr. Sci. 65 1992 231 246
31. F.C. Lin, D.M. Wang, and J.Y. Lai Asymmetric TPX membranes with high gas flux J. Membr. Sci. 110 1996 25 36
32. J.M. Cheng, D.M. Wang, F.C. Lin, and J.Y. Lai Formation and gas flux of asymmetric PMMA membranes J. Membr. Sci. 109 1996 93 107
33. E. Drioli, S. Zhang, and A. Basile Recovery of pyridine from aqueous solution by membrane pervaporation J. Membr. Sci. 80 1993 309 318
34. I. Pinnau, and W.J. Koros A qualitative skin layer formation mechanism for membrane made by dry/wet phase inversion J. Polym. Sci. Polym. Phys. 31 1993 419 427
35. J. Won, H.J. Lee, and Y.S. Kang The effect of dope solution characteristics on the membrane morphology and gas transport properties 2. PES/g-BL system J. Membr. Sci. 176 2000 11 19
36. K. Kimmerle, and H. Strathmann Analysis of the structure-determining process of phase inversion membranes Desalination 79 1990 283 302
37. C.A. Smolders, A.J. Reuvers, R.M. Boom, and I.M. Wienk Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids J. Membr. Sci. 73 1992 259 275
38. Unpublished results.
39. M. Mulder Basic Principles of Membrane Technology 2nd ed. 1996 Kluwer Academic Publishers Dordrecht
40. R.E. Kesting Synthetic Polymeric Membranes 1985 McGraw Hill New York
41. A.M. Alsari, K.C. Klulbe, and T. Matsuura The effect of sodium dodecyl sulfate solutions as gelation media on the formation of PES membranes J. Membr. Sci. 188 2001 279
42. J.M.S. Henis, M.K. Tripodi, Multicomponent membranes for gas separations, US Patent 4,230,463 (1980).
43. A.M. Torchia, G. Clarizia, A. Figoli, and E. Drioli Potentiality of PEEKWC as new material an food packaging Ital. J. Food Pack. 16 2004 173 184
44. A.M. Shishatskii, Yu.P. Yampol'skii, and K.V. Peinemann Effects of film thickness on density and gas permeation parameters of glassy polymers J. Membr. Sci. 112 1996 275 285
45. M.S. McCaig, and D.R. Paul Effect of film thickness on the changes in gas permeability of a glassy polyarylate due to physical ageing. Part I. Experimental observations Polymer 41 2000 629 637
46. M.S. McCaig, D.R. Paul, and J.W. Barlow Effect of film thickness on the changes in gas permeability of a glassy polyarylate due to physical ageing. Part II. Mathematical model Polymer 41 2000 639 648