Influence of Conical and Annular Nozzle Geometric Configurations on Flow and Heat Transfer Characteristics due to Flow Impingement onto a Flat Plate

Numerical Heat Transfer; Part A: Applications

Volumn 48, Issue 9, 2005, Pages 917-939

  Shuja, S Z ^a   Yilbas, B S ^a   Budair, M O ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY LAYERS; COMPUTER SIMULATION; HEAT TRANSFER; LASER APPLICATIONS; MACHINING; PIPE FLOW;

JET IMPINGEMENT; SKIN FRICTION;

NOZZLES;

EID: 31444438697     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407780591006868     Document Type: Article

References (47)

1. G. Chochua, W. Shyy, S. Thakur, A. Brankovic, J. Lienau, L. Porter, and D. Lischinsky, A Computational and Experimental Investigation of Turbulent Jet and Crossflow Interaction, Numer. Heat Transfer A, vol. 38, no. 6, pp. 557-572, 2000.
2. H. Chattopadhyay and S. K. Saha, Numerical Investigations of Heat Transfer over a Moving Surface due to Impinging Knife Jets, Numer. Heat Transfer A, vol. 39, no. 5, pp. 531-549, 2001.
3. H. B. Aissia, Y. Zaouali, and S. El Golli, Numerical Study of the Influence of Dynamic and Thermal Exit Conditions on Axisymmetric Laminar Buoyant Jet, Numer. Heat Transfer A, vol. 42, no. 4, pp. 427-444, 2002.
4. S. M. Hatem, M. S. El Golli, G. Le Palec, and P. Bournot, Numerical Study of a Heated Pulsed Axisymmetric Jet in Laminar Mode, Numer. Heat Transfer A, vol. 43, no. 4, pp. 409-429, 2003.
5. A. J. Bula, M. M. Rahman, and J. E. Leland, Numerical Modeling of Conjugate Heat Transfer During Impingement of Free Liquid Jet Issuing from a Slot Nozzle, Numer. Heat Transfer A, vol. 38, no. 1, pp. 45-66, 2000.
6. A. Y. Tong, A Numerical Study on the Hydrodynamics and Heat Transfer of a Circular Liquid Jet Impinging onto a Substrate, Numer. Heat Transfer A, vol. 44, no. 1, pp. 1-19, 2003.
7. G. Singh, T. Sundararajan, and U. S. P. Shet, Entrainment and Mixing Studies for a Variable Density Confined Jet, Numer. Heat Transfer A, vol. 35, no. 2, pp. 205-224, 1999.
8. H. Kawahara and T. Nishimura, Two-Dimensional Simulation in Transitional Jet Diffusion Flame with/without a Duct, Numer. Heat Transfer A, vol. 40, no. 6, pp,. 639-657, 2001.
9. I. Sezai and L. B. Y. Aldabbagh, Three-Dimensional Numerical Investigation of Flow and Heat Transfer Characteristics of Inline Jet Arrays, Numer. Heat Transfer A, vol. 45, no. 3, pp. 271-288, 2004.
10. M. Kumar Tiwari, A. Mukhopadhyay, and D. Sanyal, Numerical Simulation of Optimal Multiple-Input, Multiple-Output Control of Jet Impingement Cooling of a Glass Plate, Numer. Heat Transfer A, vol. 46, no. 4, pp. 401-424, 2004.
11. D. Angirasa, Interaction of Low-Velocity Plane Jets with Buoyant Convection Adjacent to Heated Vertical Surfaces, Numer. Heat Transfer A, vol. 35, no. 1, pp. 67-84, 2004.
12. W. Shyy, X. He, and S. Thakur, Jets and Free Stream Interaction around a Low-Reynolds-Number Airfoil Leading Edge, Numer. Heat Transfer A, vol. 35, no. 8, pp. 891-902, 1999.
13. H. Fujimoto, H. Takuda, N. Hatta, and R. Viskanta, Numerical Simulation of Transient Cooling of a Hot Solid by an Impinging Free Surface Jet, Numer. Heat Transfer A, vol. 36, no. 8, pp. 767-780, 1999.
14. A. Abdon and B. Sunden, Numerical Investigation of Impingement Heat Transfer Using Linear and Nonlinear Two-Equation Turbulence Models, Numer. Heat Transfer A, vol. 40, no. 6, pp. 563-578, 2001.
15. L. B. Y. Aldabbagh and I. Sezai, Numerical Simulation of Three-Dimensional Laminar, Square Twin-Jet Impingement on a Flat Plate, Flow Structure, and Heat Transfer, Numer. Heat Transfer A, vol. 41, no. 8, pp. 835-850, 2002.
16. A. Chatterjee, S. C. Dhingra, and S. S. Kapur, Laminar Impinging Jet Heat Transfer with a Purely Viscous Inelastic Fluid, Numer. Heat Transfer A, vol. 42, no. 1, pp. 193-213, 2002.
17. S. Z. Shuja, Laser Heating of a Moving Slab in the Presence of an Impinging Gas Jet: Influence of Slab Velocity, Numer. Heat Transfer A, vol. 42, no. 7, pp. 757-775, 2002.
18. S. Y. Kim and A. V. Kuznetsov, Optimization of Pin-Fin Heat Sinks Using Anisotropic Local Thermal Nonequilibrium Porous Model in a Jet Impinging Channel, Numer. Heat Transfer A, vol. 44, no. 8, pp. 771-787, 2003.
19. D. Kim, W. Kim, and A. V. Kuznetsov, Analysis of Coupled Turbulent Flow and Solidification in the Wedge-Shaped Pool with Different Nozzles during Twin-Roll Strip Casting, Numer. Heat Transfer A, vol. 41, no. 1, pp. 1-17, 2002.
20. M. Ruhul Amin and A. Mahajan, Numerical Investigation of the Effects of Turbulence from Submerged Entry Nozzle during Continuous Casting Process, Numer. Heat Transfer A, vol. 46, no. 3, pp. 221-240, 2004.
21. M. K. Tiwari, A. Mukhopadhyay, and D. Sanyal, Numerical Simulation of Optimal Multiple-Input, Multiple-Output Control of Jet Impingement Cooling of a Glass Plate, Numer. Heat Transfer A, vol. 46, no. 4, pp. 401-424, 2004.
22. A. Chatterjee and L. J. Deviprasath, Heat Transfer in Confined Laminar Axisymmetric Impinging Jets at Small Nozzle-Plate Distances: The Role of Upstream Vorticity Diffusion, Numer. Heat Transfer A, vol. 39, no. 8, pp. 777-800, 2001.
23. T. J. Craft, L. J. W. Graham, and B. E. Launder, Impinging Jet Studies for Turbulence Model Assessment: An Examination of the Performance of Four Turbulence Models, Int. J. Heat Mass Transfer, vol. 36, no. 10, pp. 2685-2697, 1993.
24. W. C. Lasher and D. B. Taulbee, Reynolds Stress Model Assessment Using Round Jet Experimental Data, Int. J. Heat Fluid Flow, vol. 15, no. 5, pp. 357-363, 1994.
25. S. Ashforth-Frost and K. Jambunathan, Numerical Prediction of Semi-confined Jet Impingement and Comparisons with Experimental Data, Int. J. Numer. Meth. Fluids, vol. 23, pp. 295-306, 1996.
26. I. Sezai and A. A. Mohamad, Three-Dimensional Simulation of Laminar Rectangular Impinging Jets, Flow Structure, and Heat Transfer, ASME J. Heat Transfer, vol. 121, pp. 50-56, 1999.
27. G. K. Morris, S. V. Garimella, and R. S. Amano, Prediction of Jet Impingement Heat Transfer Using a Hybrid Wall Treatment With Different Turbulent Prandtl Number Functions, ASME J. Heat Transfer, vol. 118, pp. 562-569, 1996.
28. J. W. Baughn and S. Shimizu, Heat Transfer Measurements from a Surface with Uniform Heat Flux and an Impinging Jet, ASME J. Heat Transfer, vol. 111, pp. 1096-1098, 1996.
29. K. Jambunathan, E. Lai, M. A. Moss, and B. L. Button, A Review of Heat Transfer Data for Single Circular Jet Impingement, Int. J. Heat Fluid Flow, vol. 13, pp. 106-115, 1992.
30. D. H. Wolf, R. Viskanta, and F. P. Incropera, Turbulence Dissipation in a Free-Surface Jet of Water and its Effects on Local Impingement Heat Transfer from a Heated Surface: Part 1—Flow Structure, ASME J. Heat Transfer, vol. 117, pp. 85-94, 1995.
31. D. H. Wolf, R. Viskanta, and F. P. Incropera, Turbulence Dissipation in a Free-Surface Jet of Water and Its Effects on Local Impingement Heat Transfer from a Heated Surface: Part 2—Local Heat Transfer, ASME J. Heat Transfer, vol. 117, pp. 95-103, 1995.
32. M. Dianat, M. Fairweather, and W. P. Jones, Predictions of Axisymmetric and Two-Dimensional Impinging Turbulent Jets, Int. J. Heat Fluid Flow, vol. 17, no. 6, pp. 530-538, 1996.
33. P. M. Ilavarasan and P. A. Molian, Design, Fabrication and Testing of an Off-axial Gas Jet Nozzle for Enhanced Laser Cutting, Proc. Laser Materials Proceeding Conf. (1993), pp. 350-360, Laser Institute of America, Orlando, Florida, USA, 1994.
34. R. Edlet, P. Berger, and H. Huegl, Performance of Various Nozzle Designs in Laser Cutting, in B. L. Mordike (ed.), Laser Treatment of Materials, pp. 111-116, DGM Informationsges, Berlin, Germany, 1992.
35. B. Juckenath, S. Biermann, and H. W. Bergmann, Cutting of Aluminum Alloys Using High Pressure Coaxial Nozzle, Proc. Material Processing Conf., ICALEO’89, pp. 216-227, Laser Institute of America, Orlando, Florida, USA, 1989.
36. P. S. Chinnoek and R. H. Page, Heat Transfer Enhancement with a Self-oscillating Jet Impingement Nozzle, in G. F. Hewitt (ed.), Proc. Int. Heat Transfer Conf., 19-24, Institute of Chemical Engineering, Brighton, UK, 1994.
37. G. Yang, M. Choi, and J. S. Lee, An Experimental Study of Slot Jet Impingement Cooling on Concave Surface: Effects of Nozzle Configuration and Curvature, Int. J. Heat Mass Transfer, vol. 42, no. 12, pp. 2199-2209, 1999.
38. J. Seyed-Yagoobi, Enhancement of Heat and Mass Transfer with Innovative Impinging Jets, Drying Technol., vol. 14, no. 5, pp. 1173-1196, 1996.
39. D. Lytle and B. W. Webb, Air Jet Impingement Heat Transfer at Low Nozzle-Plate Spacings, Int. J. Heat Mass Transfer, vol. 37, no. 12, pp. 1687-1697, 1994.
40. D. W. Colucci and R. Viskanta, Effect of Nozzle Geometry on Local Convective Heat Transfer to a Confined Impinging Air Jet, Exp. Thermal Fluid Sci., vol. 13, no. 1, pp. 71-80, 1996.
41. B. E. Launder, Second-Moment Closure and Its Use in Modelling Turbulent Industrial Flows, Int. J. Numer. Meth. Fluids, vol. 9, pp. 963-985, 1989.
42. C. Benocci, Introduction to the Modeling of Turbulence, 1991-02, lecture notes, Von Karman Institute for Fluid Dynamics, The Netherlands, 1991.
43. S. Hogg and M. A. Leschziner, Second-Moment-Closure Calculation of Strongly Swirling Confined Flow with Large Density Gradients, Int. J. Heat Fluid Flow, vol. 10, no. 1, pp. 16-27, 1989.
44. H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Longman Scientific and Technical, New York, 1995.
45. D. Cooper, D. C. Jackson, B. E. Launder, and G. X. Liao, Impinging Jet Studies for Turbulence Model Assessment—I: Flow-Field Experiments, Int. J. Heat Mass Transfer, vol. 36, pp. 2675-2684, 1993.
46. D. Elkaim, M. Reggio, and R. Camarero, Simulating Two-Dimensional Turbulent Flow by Using the k-e model and the Vorticity-Stream Function Formulation, Int. J. Numer. Meth. Fluids, vol. 14, pp. 961-980, 1992.
47. S. V. Patankar, Numerical Heat Transfer, McGraw-Hill, New York, 1980.