Pressure-dependent viscosity of powder injection moulding compounds

Rheologica Acta

Volumn 45, Issue 3, 2006, Pages 290-296

  Hausnerova, Berenika ^a   Sedlacek, Tomas ^a   Slezak, Radek ^a   Saha, Petr ^a  

^a TOMAS BATA UNIVERSITY IN ZLIN   (Czech Republic)

Author keywords

Modified capillary rheometer; PIM technology; Pressure dependent viscosity; Temperature and pressure coefficients

Indexed keywords

CAPILLARY FLOW; INJECTION MOLDING; MATHEMATICAL MODELS; POLYOLEFINS; PRESSURE; RHEOMETERS; TEMPERATURE; VISCOSITY;

EID: 31144453370     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-005-0036-4     Document Type: Article

References (55)

1. Baker FS, Thomas M (1993) The effect of hydrostatic pressure on the flow properties of various polymers. Macromol Symp 68:13-24
2. Barnes HA, Roberts GP (1992) A simple empirical model describing the steady -shear and extensional viscosities of polymer melts. J Non Newt Fluid Mech 44:113-126 10.1016/0377-0257(92)80047-2
3. Binding DM, Couch MA, Walters K (1998) The pressure dependence of the shear and elongational properties of polymer melts. J Non Newt Fluid Mech 79:137-155 10.1016/S0377-0257(98)00102-5
4. Binding DM, Couch MA, Walters K (1999) The rheology of multigrade oils at elevated pressures. J Non Newt Fluid Mech 87:155-164 10.1016/ S0377-0257(99)00060-9
5. Carley JF (1961) Effect of static pressure on polymer melt viscosities. Mod Plast 39:123-130, 198-204
6. Carter RE (2000) On the measurement of the pressure coefficient of viscosity by capillary extrusion rheometry, and on the relevance of this parameter to practical materials processing. In: XIIIth international congress on rheology, Cambridge, pp 125-127
7. Casale A, Penwell RC, Porter RS (1971) The influence of pressure on the capillary flow of poly(methyl methacrylate). Rheol Acta 10:412-417 10.1007/BF01993719
8. Choi SY (1968) Determination of melt viscosity as a function of hydrostatic pressure in an extrusion rheometer. J Polym Sci 6:2043-2049 10.1002/pol.1968.160061208
9. Christensen JH, Kjaer EM (1999) Pressure effect on extensional viscosity. J Reinf Plast Comp 18:651-661
10. Cogswell RN (1973) The influence of pressure on the viscosity of polymer melts. Plast Polym 41:39-43
11. Cogswell RN, McGowan JC (1972) The effect of pressure and temperature upon the viscosities of liquids with special reference to polymeric liquids. Br Polym J 4:183-198
12. Couch MA, Binding DM (2000) High pressure capillary rheometry of polymeric fluids. Polymer 41:6323-6334 10.1016/S0032-3861(99)00865-4
13. Denn MM (1981) Pressure drop-flow rate equation for adiabatic capillary flow with a pressure- and temperature-dependent viscosity. Polym Eng Sci 21:65-68 10.1002/pen.760210202
14. Driscoll PD, Bogue DC (1990) Pressure effects in polymer melt rheology. J Appl Polym Sci 39:1755-1768 10.1002/app.1990.070390813
15. Duvdevani J, Klein I (1967) Analysis of polymer melt flow in capillaries including pressure effects. SPE J 23:41-45
16. Goubert A, Vermant J, Moldenaers P, Göttfert A, Ernst B (2001) Comparison of measurement techniques for evaluating the pressure dependence of the viscosity. Appl Rheol 11:26-37
17. Hatzikiriakos SG, Dealy JM (1994) Start-up pressure transients in a capillary rheometer. Polym Eng Sci 34:493-499 10.1002/pen.760340606
18. Hausnerova B, Saha P, Kubat J (1999) Capillary flow of hard-metal carbide compounds. Int Polym Proc 14:254-260
19. Hay G, Mackay ME, Awati KM, Park Y (1999) Pressure and temperature effects in slit rheometry. J Rheol 43:1099-1116 10.1122/1.551043
20. Hoffman RL (1972) Discontinuous and dilatant viscosity behaviour in concentrated suspensions. Trans Soc Rheol 16:155-173 10.1122/1.549250
21. Honek T, Hausnerova B, Saha P (2002) Temperature dependent flow instabilities of highly filled polymer compounds. Appl Rheol 12:72-80
22. Honek T, Hausnerova B, Saha P (2005) Relative viscosity models and their application to capillary flow data of highly filled hard-metal carbide powder compounds. Polym Comp 26:29-36 10.1002/pc.20067
23. Ito K, Tsutsui M, Kasajima M (1972) Capillary flow of polymer melts under hydrostatic pressure. Appl Polym Symp 20:109-117
24. Izu P, Munoz ME, Pena JJ, Santamaria A (1993) Capillary and slit-die flow of two liquid-crystalline polymers. The effect of pressure on viscosity. J Polym Sci 31:347-356
25. Kadijk SE, van den Brule BNAA (1994) On the pressure dependency of the viscosity of molten polymers. Polym Eng Sci 34:1535-1546 10.1002/ pen.760342004
26. Kamal MR, Nyun H (1973) The effect of pressure on the shear viscosity of polymer melts. Trans Soc Rheol 17:271-285 10.1122/1.549315
27. Kamal MR, Nyun H (1980) Capillary viscometry: A complete analysis including pressure and viscous heating effects. Polym Eng Sci 20:109-119 10.1002/pen.760200202
28. Koran F, Dealy JM (1999) A high pressure sliding plate rheometer. J Rheol 43:1279-1290 10.1122/1.551046
29. Laun HM (1983) Polymer melt rheology with a slit die. Rheol Acta 22:171-185 10.1007/BF01332370
30. Liang JZ (2001) Pressure effect of viscosity for polymer fluids in die flow. Polymer 42:3709-3712 10.1016/S0032-3861(00)00507-3
31. Lord HA (1979) Flow of polymers with pressure-dependent viscosity in injection molding dies. Polym Eng Sci 19:469-473 10.1002/pen.760190702
32. Mackley MR, Spitteler PHJ (1996) Experimental observations on the pressure-dependent polymer melt rheology of linear low density polyethylene, using a multi-pass rheometer. Rheol Acta 35:202-209 10.1007/BF00396047
33. Maxwell B, Jung A (1957) Hydrostatic pressure effect on polymer melt viscosity. Mod Plast 35:174-182
34. Moldenaers P, Vermant J, Mewis J, Heynderickx I (1996) Origin of non-linearities in the bagley plots of thermotropic copolyesters. J Rheol 40:203-219 10.1122/1.550799
35. Penwell RC, Porter RS (1969) Viscosity of polystyrene near the glass transition. J Appl Polym Sci 13:2427-2437 10.1002/app.1969.070131116
36. Penwell RC, Porter RS (1971) Effect of pressure in capillary flow of polystyrene. J Polym Sci 9:463-482 10.1002/pol.1971.110090611
37. Penwell RC, Porter RS, Middleman S (1971) Determination of the pressure coefficient and pressure effects in capillary flow. J Polym Sci 9:731-745 10.1002/pol.1971.160090412
38. Ranganathan M, Mackley MR, Spitteler PHJ (1999) The application of the multipass rheometer to time-dependent capillary flow measurements of a polyethylene melt. J Rheol 43:443-453 10.1122/1.550990
39. Sedlacek T, Zatloukal M, Filip P, Saha P, Boldizar A (2004) On the effect of pressure on the shear and elongational viscosities of polymer melts. Polym Eng Sci 44:1328-1337 10.1002/pen.20128
40. Sedlacek T, Cermak R, Hausnerova B, Zatloukal M, Boldizar A, Saha P (2005) On PVT and rheological measurements of polymer melts: Correction of the hole fraction-viscosity relationship. Int Polym Proc 20 (in print)
41. Semjonow V (1962) Über ein rotationsviskosimeter zur messung der druckabhängigkeit der viskosität hochpolymerer schmelzen. Rheol Acta 2:138-143 10.1007/BF01972540
42. Semjonow V (1965) Druckabhängigkeit der viskosität einiger polyolefinschmelzen. Rheol Acta 4:133-137 10.1007/BF01984709
43. Semjonow V (1967) Druckabhängigkeit der viskosität einiger polystyrolschmelzen. Rheol Acta 6:165-170 10.1007/BF01969170
44. Suwardie H, Yazici R, Kalyon DM, Kovenklioglu S (1998) Capillary flow behavior of microcrystalline wax and silicon carbide suspension. J Mater Sci 33:5059-5067 10.1023/A:1004423411227
45. Thomas M (1997) The Effect of pressure on the viscosity of polymers. In: Conference polymer testing '97: Design and rheology in the Plastics Industry, Rapra Technology Ltd, Paper 3:1-4
46. Utracki LA (1983) Pressure dependence of newtonian viscosity. Polym Eng Sci 23:446-451 10.1002/pen.760230806
47. Utracki LA (1985) A method of computation of the pressure effect on melt viscosity. Polym Eng Sci 25:655-668 10.1002/pen.760251104
48. Westover RC (1961) Effect of hydrostatic pressure on polyethylene melt rheology. Soc Plast Eng Trans 1:80-85
49. Westover RC (1966) The significance of slip in polymer melt flow. Polym Eng Sci 6:83-89 10.1002/pen.760060116
50. Westover RC (1991/1992) Measuring polymer melt viscosities at high pressures: The hydrostatic pressure rheometer. Adv Polym Technol 11:147-151 10.1002/adv.1991.060110208
51. Yaras P, Kalyon DM, Yilmazer U (1994) Flow instabilities in capillary flow of concentrated suspensions. Rheol Acta 33:48-59 10.1007/BF00453463
52. Yasuda K, Armstrong RC, Cohen RE (1981) Shear flow properties of concentrated solutions of linear and star branched polystyrenes. Rheol Acta 20:163-178 10.1007/BF01513059
53. Yilmazer U, Kalyon DM (1991) Dilatancy of concentrated suspensions with newtonian matrices. Polym Comp 12:226-232 10.1002/pc.750120403
54. Yilmazer U, Gogos C, Kalyon DM (1989) mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors. Polym Comp 10:242-248 10.1002/pc.750100406
55. Youseffi M, Menzies IA (1997) Injection moulding of WC-6Co powder using two new binder systems based on montanester waxes and water soluble gelling polymers. Powder Metal 40:62-65