Finding feasible mold parting directions using graphics hardware

ACM Symposium on Solid Modeling and Applications, SM

Volumn , Issue , 2005, Pages 233-243

  Khardekar, Rahul ^a   Burton, Greg ^a   McMains, Sara ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GEOMETRIC PARTS; GRAPHICS HARDWARE;

ALGORITHMS; COMPUTER AIDED DESIGN; EDGE DETECTION; GRAPHIC METHODS; MATHEMATICAL MODELS;

COMPUTER HARDWARE;

EID: 30944441913     PISSN: 18117783     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1145/1060244.1060271     Document Type: Conference Paper

References (42)

1. AHN, H.-K., DE BERG, M., BOSE, P., CHENG, S.-W., HALPERIN, D., MATOUSEK, J., AND SCHWARZKOPF, O. 2002. Separating an object from its cast. Computer-Aided Design 34, 547-59.
2. BALASUBRAMANIAM, M., LAXMIPRASAD, P., SARMA, S., AND SHAIKH, Z. 2000. Generating 5-axis NC roughing paths directly from a tessellated representation. Computer-Aided Design 32, 4 (April), 261-77.
3. CGAL.ORG, 2004. Computational Geometry Algorithms Library. http://www.cgal.org.
4. CHEN, L.-L., AND CHOU, S.-Y. 1995. Partial Visibility for Selecting a Parting Direction in Mold and Die Design. Journal of Manufacturing Systems 14, 5, 319-330.
5. CHEN, Y., AND ROSEN, D. W. 2003. A reverse glue approach to automated construction of multi-piece molds. Journal of Computing and Information Science in Engineering 3, 3, 219-230.
6. CHEN, L.-L., CHOU, S.-Y., AND WOO, T. C. 1993. Parting directions for mould and die design. Computer-Aided Design 25, 12 (December), 762-768.
7. CHEN, Y. H. 1997. Determining parting direction based on minimum bounding box and fuzzy logics. Int. J. Mach. Tools Manufact. 37, 9, 1189-1199.
8. CHEN, Y. 2001. Computer-Aided Design for Rapid Tooling: Methods for Mold Design and Design-for-Manufacture. PhD thesis, Georgia Institute of Technology.
9. DE BERG, M., VAN KREVELD, M., OVERMARS, M., AND SCHWARZKOPF, O. 2000. Computational Geometry: Algorithms and Applications, second ed. Springer, Berlin.
10. DHALIWAL, S., GUPTA, S., HUANG, J., AND KUMAR, M. 2001. A feature based approach to automated design of multi-piece sacrificial molds. ASME Journal of Computing and Information Science in Engineering 1, 3, 225-234.
11. DHALIWAL, S., GUPTA, S., HUANG, J., AND PRIYADARSHI, A. 2003. Algorithms for computing global accessiblity cones. Journal of Computing and Information Science in Engineering 3, 3 (September), 200-209.
12. ELBER, G., CHEN, X., AND COHEN, E. 2004. Mold Accessibility via Gauss Map Analysis. In Proceedings of Shape Modeling International, 263-72.
13. EVERITT, C., REGE, A., AND CEBENOYAN, C., 2003. Interactive geometric and scientific computation using graphics hardware. ACM SIGGRAPH 2003 Course #11 Notes, July.
14. FERNANDO, R. 2004. GPU Gems Programming Techniques, Tips amd Tricks for real time graphics hardware. Addison-Wesley.
15. Fu, M. W., FUH, J. Y. H., AND NEE, A. Y. C. 1999. Generation of optimal parting direction based on undercut features in injection molded parts. IIE Transactions 31, 947-955.
16. FU, M. W., FUH, J. Y. H., AND NEE, A. Y. C. 1999. Undercut feature recognition in an injection mould design system. Computer-Aided Design 31, 12 (October), 777-790.
17. GAN, J. G., WOO, T. C., AND TANG, K. 1994. Spherical maps: their construction, properties and approximation. Journal of Mechanical Design 116, 2 (June), 357-363.
18. GANTER, M. A., AND SKOGLUND, P. A. 1991. Feature extraction for casting core development. In 17th Design Automation Conference presented at the 1991 ASME Design Technical Conferences, American Society of Mechanical Engineers, 93-100.
19. GOTTSCHALK, S. 1998. Collision Queries using Oriented Bounding Boxes, PhD thesis, University of North Carolina, Chapel Hill, Department of Computer Science.
20. HUI, K. C., AND TAN, S. T. 1992. Mould design with sweep operations - a heuristic search approach. Computer-Aided Design 24, 2 (February), 81-91.
21. INUI, M., AND KAKIO, R. 2000. Fast visualization of NC milling result using graphics acceleration hardware. In IEEE International Conference on Robotics and Automation, IEEE, 3089-94.
22. INUI, M. 2003. Fast inverse offset computation using polygon rendering hardware. Computer Aided Design 35, 2 (February), 191-201.
23. KHARDEKAR, R., AND MCMAINS, S. 2004. Finding mold removal directions using graphics hardware. In ACM Workshop on General Purpose Computing on Graphics Processors, C-19. (abstract).
24. KONIG, A. H., AND GROLLER, E. 1998. Real time simulation and visualization of NC milling processes for inhomogeneous materials on low-end graphics hardware. In Computer Graphics International, IEEE, 338-49.
25. KWONG, K. 1992. Computer-aided parting line and parting surface generation in mould design. PhD thesis, The university of Hong Kong, Hong Kong.
26. LIN, M. C., AND MANOCHA, D. 2003. SIGGRAPH 2003 Course Notes, vol. 11. ACM SIGGRAPH, July, ch. Interactive Geometric and Scientific Computations Using Graphics Hardware. 1-6.
27. MCGUIRE, M., AND HUGHES, J. F. 2004. Hardware-determined feature edges. In Proceedings of the 3rd international symposium on non-photorealistic animation and rendering, ACM Press, 35-147.
28. MCMAINS, S., AND CHEN, X. 2004. Determining Moldability and Parting Directions for Polygons with Curved Edges. In International Mechanical Engineering Congress and Exposition, ASME, IMECE2004-62227.
29. O'ROURKE, J. 1998. Computational Geometry in C (2nd Edition). Springer.
30. POP, M., DUNCAN, C., BAREQUET, G., GOODRICH, M., HUANG, W., AND KUMAR, S. 2001. Efficient perspective-accurate silhouette computation and applications. In Proceedings of the seventeenth annual symposium on computational geometry, ACM Press, 60-68.
31. RAPPAPORT, D., AND ROSENBLOOM, A. 1994. Moldable and castable polygons. Computational Geometry: Theory and Applications 4, 219-233.
32. RAVI, B., AND SRINIVASAN, M. N. 1990. Decision criteria for computer-aided parting surface design. Computer-Aided Design 22, 11-18.
33. REQUICHA, A. A. G. 1980. Representations for Rigid Solids: Theory, Methods, and Systems. ACM Computing Surveys (December), 437-464.
34. SAITO, T., AND TAKAHASHI, T. 1991. NC machining with G-buffer method. SIGGRAPH 91 25, 4 (July), 207-16.
35. SPITZ, S., SPYRIDI, A., AND REQUICHA, A. 1999. Accessibility analysis for planning of dimensional inspection with coordinate measuring machines. IEEE Transactions on Robotics and Automation, 714-27.
36. STAMPFL, J., LIU, H.-C., NAM, S. W., SAKAMOTO, K., TSURU, H., KANG, S., COOPER, A. G., NICKEL, A., AND PRINZ, F. B. 2002. Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries. Materials Science & Engineering. 334, 1-2 (Sep), 187-192,
37. WONG, T., TAN, S. T., AND SZE, W. S. 1998. Parting line formation by slicing a 3D CAD model. Engineering with Computers 14, 4, 330-343.
38. WOO, T. C. 1994. Visibility maps and spherical algorithms. Computer-Aided Design 26, 1 (January).
39. WUERGER, D., AND GADH, R. 1997. Virtual Prototyping of Die Design Part One: Theory and Formulation. Concurrent Engineering: Research and Applications 5, 4 (December), 307-315.
40. WUERGER, D., AND GADH, R. 1997. Virtual Prototyping of Die Design Part Two: Algorithmic, Computational, and Practical Considerations. Concurrent Engineering: Research and Applications 5, 4 (December), 317-326.
41. YE, X. G., FUH, J. Y. H., AND LEE, K. S. 2001. A hybrid method for recognition of undercut features from moulded parts. Computer-Aided Design 33, 1023-1034.
42. YIN, Z., DING, H., AND XIONG, Y. 2001. Virtual prototyping of mold design: geometric mouldability analysis for near-net-shape manufactured parts by feature recognition and geometric reasoning. Computer-Aided Design 33, 137-154.