Effects of titanate coupling agent on the properties of mica-reinforced nylon-6 composites

Polymer Engineering and Science

Volumn 45, Issue 11, 2005, Pages 1479-1486

  Bose, Suryasarathi ^a   Mahanwar, P A ^a  

^a INSTITUTE OF CHEMICAL TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

CONCENTRATION (PROCESS); ELASTIC MODULI; PARTICLE SIZE ANALYSIS; POLYMERS; TENSILE STRENGTH; THERMOPLASTICS; TITANIUM COMPOUNDS;

FILLED POLYMERS; HEAT DISTORTION; PARTICULATE-REINFORCED THERMOPLASTIC COMPOSITES;

REINFORCED PLASTICS;

EID: 30544444669     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.20426     Document Type: Article

References (49)

1. H.S. Katz and J.V. Milewski, eds., Handbook of Fillers and Reinforcement for Plastics, Van Nostrand Reinhold, New York (1978).
2. S.N. Maiti and B.H. Lopez, J. Appl. Polym. Sci., 44, 353 (1992).
3. M.I. Kohan, ed., Nylon Plastics, Hanser, New York (1973).
4. R. Gachter and H. Muller, Plastics Additives Handbook, Hanser Gardner, Cincinnati (1993).
5. Modern Plastics Encyclopedia Handbook, McGraw Hill, New York (1994).
6. C.A. Harper, Handbook of Plastics, Elastomers and Composites, McGraw Hill, New York (1996).
7. M.L. Berins, SP1 Plastics Engineering Handbook, Chapman and Hall, London (1974).
8. A. Meddad and B. Fisa, J. Appl. Polym. Sci., 64, 653 (1997).
9. S.C. Tjong and S.A. Xu, J. Appl. Polym. Sci., 81, 3231 (2001).
10. M. Ulrich, C. Caze, and P. Laroche, J. Appl. Polym. Sci., 67, 201 (1998).
11. T. Kyu, Z.L. Zhou, G.C. Zhu, Y. Tajuddin, and S. Qutubiddin, J. Polym. Sci., Polym Phys., 34, 1761 (1996).
12. L.E. Nielsen, Mechanical Properties of Polymers and Composite, Marcel Dekker, New York (1974).
13. Z. Xing, Fuel Energy Abst., 37, 185 (1996).
14. H. Tanaka, Polym. Eng. Sci., 39, 817 (1999).
15. T. Watari, T. Yamane, S. Moriyama, T. Torikai, Y. Imaoka, K. Suchiro, and H. Tateyama, Mater. Res. Bull., 32, 719 (1997).
16. L.P. Cheng, D.J. Lin, and K.C. Yang, J. Membr. Sci., 172, 157 (2000).
17. R.A. Vaia, G. Price, P.N. Ruth, H.T. Nguyen, and J. Lichtenhan, J. Appl. Clay Sci. 15, 67 (1999).
18. K.M. Hess, Kunststoffe, 73, 282 (1993).
19. M.W.L. Wilbrink, A.S. Argon, R.E. Cohen, and M. Weinberg, Polymer, 42, 10155 (2001).
20. S.C. Tjong and Y.Z. Meng, Polymer, 40, 1109 (2001).
21. R. Taesler, H. Wittich, K. Schulte, and H.R. Kricheltorf, J. Appl. Polym. Sci., 61, 783 (1996).
22. M. Avella, E. Martuscelli, M. Raimo, R. Partch, S.G. Gangolli, and B. Pascuci, J. Mater. Sci., 32, 2411 (1997).
23. Z.M. Qian and C.H. Zhu, Plast. Sci. Technol., 4, 10 (1983).
24. H.G. Chen, S.Y. Xiang, and B.L. Lv, Plast. Sci. Technol., 1, 15 (1996).
25. Z.Y. Yao, Plast. Indust., 6, 13 (1991).
26. S.J. Monte and G. Sugerman, Polym. Eng. Sci., 24, 1269 (1984).
27. M.Y.A. Fuad, Z. Ismail, A.M. Ishak, and A.K.M. Omar, Eur. Polym. J., 31, 885 (1995).
28. R.T. Woodhams and M. Xanthos, in Handbook of Fillers and Reinforcement for Plastics, H.S. Katz and J.V. Milewski, cds., Van Nostrand Reinhold, New York (1978).
29. G. Daoji, S. Lu, S. Caisheng. and W. Zhijian, Eur. Polym. J., 37, 1359 (2001).
30. A.O. Maged, A. Ayman, M. Martin, and W.S. Ulrich, Polymer, 42, 6545 (2001).
31. Z. Ruofei, H. Jin, S. Bin. and D. Gance. J. Appl. Polym. Sci., 82, 2719 (2001).
32. P.D. Shepherd, F.J. Golemba, and F.W. Maine, in Handbook of Fillers and Reinforcements for Plastics, H.S. Katz and J.V. Milewski, eds., Van Nostrand Reinhold, New York (1978).
33. V.B. Gupta and C. Brahatheeswaran, J. Appl. Polym. Sci., 52, 107 (1994).
34. W.R. Grace. British Patent 1, 136, 350 (1968).
35. M. Xanthos, Plast. Compd., July 19 (1989).
36. M.T. Pastorini and R.C.R. Nunes, J. Appl. Polym. Sci., 74, 1361 (1999).
37. K. Okuno and R.T. Woodhams, J. Appl. Polym. Sci., 15, 308 (1975).
38. E.T. Susan and E.G. Charles, J. Appl, Polym. Sci., 27, 4493 (1982).
39. S. Newman and F.J. Meyer, Polym. Compos., 1, 37 (1980).
40. C.J.R. Verbeek, Mater. Lett., 51, 1919 (2003).
41. H.P. Schrieber, Y.B. Tewari, and M.R. Wertheimer, J. Appl. Polym. Sci., 20, 2663 (1976).
42. W.T. Collins and J.L. Kludt, Reinforced Plastics/Composites Institute 30th Annual Conf., Society of the Plastic Industry, Sect. 7D (1975).
43. B. Pushpa, N.K. Jha, and K. Anand, J. Appl. Polym. Sci., 56, 1339 (1995).
44. A.W. Chuah, Y.C. Leong, and S.N. Gan, Eur. Polym. J., 36, 789 (2000).
45. R.B. Seymour and C.E. Carraher, Structure-Property Relationship in Polymers, Plenum Press, New York (1984).
46. S.N. Maiti and P.K. Mahapatro, J. Appl. Polym. Sci., 42, 3101 (1991).
47. I.A. Mirta, M. Elsi, J.V. DeGroot Jr., and W.M. Christopher, J. Rheo.,36, 1165 (1992).
48. M. Ramos and M.S. Berna, Polym. Eng. Sci., 31, 245 (1991).
49. C.D. Han, D. Stanford, and H.Y. Yoo, Polym. Eng. Sci., 18, 849 (1978).