Bulk fatigue damage evolution in polyamide-6 and in a polyamide-6 nanocomposite

Polymer Composites

Volumn 26, Issue 5, 2005, Pages 636-646

  Bellemare, Simon C ^a,c   Dickson, M Ivan ^a   Bureau, Martin N ^b   Denault, Johanne ^b  

^a ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

^b NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^c Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CYCLIC STRAINING; FATIGUE TESTS; MICROVOIDS; STORAGE MODULUS;

COMPOSITE MATERIALS; FATIGUE OF MATERIALS; NANOSTRUCTURED MATERIALS; PLASTIC DEFORMATION; STRAIN RATE; VISCOPLASTICITY;

POLYAMIDES;

EID: 30544438804     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.20126     Document Type: Article

References (52)

1. L.M. Sherman, Plastics Technol., 45, 52 (1999).
2. M. Alexandre and P. Dubois. Mater. Sci. Eng. Rep., 28, 1 (2000).
3. A. Okada and A. Usuki, Mater. Sci. Eng., C3, 109 (1995).
4. F. Yang, Y. Ou, and Z. Yu, J. Appl. Polym. Sci., 69, 355 (1998).
5. L. Liu, Z. Qi, and X. Zhu, J. Appl. Polym. Sci., 71, 1133 (1999).
6. M.N. Bureau. F. Glowacz, and J. Denault, SPE ANTEC Tech. Pap., Dallas, May 1-5, 59, 2125 (2001).
7. R.A. Kalgaonkar and J.P. Jog, SPE Conf. Polym. Nanocomposites 2001, Montreal, September 17-19, Paper 20 (2001).
8. N.R. Krishna, N. Bulakh, and J.P. Jog, SPE Conf. Polym. Nanocomposites 2001, Montreal, September 17-19, Paper 18 (2001).
9. J.A. Lee, T.G. Gopakumar, M. Kontopoulou, and J.S. Parent, SPE ANTEC Tech. Pap., San Francisco, May 5-8, 60, 2230 (2002).
10. R. Simha, L.A. Utracki, and A. Garcia-Rejon, Compos. Interfaces, 8, 345 (2001).
11. M.N. Bureau, J. Denault, K.C. Cole, and G.D. Enright, Polym. Eng. Sci., 42, 1897 (2002).
12. L. Penel-Pierron, C. Depecker, R. Seguela, and J.-M. Letebvre, J. Polym. Sci. Part B Polym. Phys., 39, 484 (2001).
13. L. Penel-Pierron, R. Seguela, J.-M. Lefebvre, V. Miri, C. Depecker, M. Jutigny, and J. Pabiot, J. Polym. Sci. Part B Polym. Phys., 39, 1224 (2001).
14. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, and O. Kamigaito, J. Mater. Res., 8, 1185 (1993).
15. K. Varlot, E. Reynaud, M.H. Kloppter, G. Vigier, and J. Varlet, J. Polym. Sci. Part B Polym. Phys., 39, 1360 (2001).
16. F.J. Medellin-Rodriguez, C. Burger, B.S. Hsiao, B. Chu, R. Vaia, and S. Philips, Polymer, 42, 9015 (2001).
17. G.M. Kim, D.H. Lee, B. Hoffmann, J. Kressler, and G. Stoppelmann, Polymer, 42, 1095 (2001).
18. E. Carlson and K. Nelson. Automotive Eng., 104, 84 (1996).
19. A. Shah, E.V. Stepanov, G. Capaccio, A. Hiltner, and E. Baer, J. Polym. Sci. Part B Polym. Phys., 36, 2355 (1998).
20. A. Shah, E.V. Stepanov, A. Klein, A. Hiltner, and E. Baer, J. Mater. Sci., 33, 3313 (1998).
21. M. Parson, E.V. Stepanov, A. Hiltner, and E. Baer, J. Mater. Sci., 35, 2659 (2000).
22. Y. Zhou, X. Lu, and N. Brown, Polym. Eng. Sci., 31, 711 (1991).
23. E. Jinen, J. Mater. Sci., 22, 1956 (1997).
24. R.W. Hertzberg and JA Manson, Fatigue of Engineering Plastics, Academic Press, New York (1980).
25. R.W. Lang, J.A. Manson. and R.W. Hertzberg, J. Mater. Sci., 22, 4015 (1987).
26. M.G. Wysgoski and G.E. Novak, J. Mater. Sci., 26, 6314 (1991).
27. J. Karger-Kocsis, Composites, 21, 243 (1990).
28. J.J. Horst and J.L. Spoormaker. Polym. Eng. Sci., 35, 2718 (1996).
29. J.J. Horst and J.L. Spoormaker, J. Mater. Sci., 32, 3641 (1997).
30. S.C. Bellemare, M.N. Bureau, J. Denault, and J.I. Dickson, Polym. Compos., 25, 433 (2004).
31. S. Rabinowitz and P. Beardmore, J. Mater. Sci., 9, 81 (1974).
32. A.J. Lesserm, J. Appl. Polym. Sci., 58, 869 (1995).
33. A. Yamashita, A. Takahara, and T. Kajiyama, Compos. Interfaces, 6, 247 (1999).
34. Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, and O. Kamigaito. J. Mater. Res., 8, 1185 (1993).
35. R.J. Crawford and P.P. Benham. J. Mater. Sci., 9, 1297 (1974).
36. R.J. Crawford and P.P. Benham, Polymer, 16, 908 (1975).
37. S.C. Bellemare, "Effect of Nanoparticles on thé Fatigue Behavior of a Semicrystalline Polymer," M.A.Se. Thesis. École Polytechnique de Montréal (2002).
38. O.D. Sherby and J.E. Dorn, J. Mech. Phys. Solids, 6, 145 (1958).
39. S.C. Bellemare, M.N. Bureau, J. Denault, and J.I. Dickson, SPE ANTEC Tech. Pap., 60, 2235 (2002).
40. E. Jinen, J. Mater. Sci., 21, 435 (1986).
41. J. Remmerswaal, 3rd Int. Conf. Low Cycle Fatigue and Elasto-Plastic Behav. Mater., Berlin, 37 (1992).
42. M.J. Mindel and N. Brown. J. Mater. Sci., 8, 863 (1973).
43. M.J. Mindel and N. Brown. J. Mater. Sci., 9, 1661 (1974).
44. M. Doi and S.F. Edwards, The Theory of Polymer Dynamics, Oxford University Press, New York (1986).
45. I.M. Ward and D.W. Hadley, An Introduction to the Mechanical Properties of Solid Polymers, John Wiley & Sons, New York (1993).
46. N.A. Jones and A.J. Lesser, J. Polym. Sci. Part B: Polym. Phys., 36, 2751 (1998).
47. W. Mizuno, M. Kawagoe, J. Qui. and M. Morita, Int. Conf. on Deform., Yield Fracture Polym., Cambridge, UK. April 7-10, 431 (1997).
48. A. Lazzeri, A. Marchetti, and G. Levita, Fatigue Fracture Eng. Mater. Struct., 20, 1207 (1997).
49. J.-P. Trotignon and J. Verdu, J. Appl. Polym. Sci., 34, 19 (1987).
50. E.J. Kramer and L.L. Berger, Adv. Polym. Sci., 91/92, 1 (1990).
51. A.J. Lesser, Polym. Eng. Sci., 36, 2366 (1996).
52. F. Zok and D.M. Shinozaki, J. Mater. Sci., 22, 3995 (1987).