State of the art of the concurrent engineering technique in the automotive industry

Journal of Engineering Design

Volumn 17, Issue 2, 2006, Pages 143-157

  Sapuan, S M ^a   Osman, M R ^a   Nukman, Y ^b  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^b UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Automotive body design; Automotive chassis design; Automotive industry; Concurrent engineering

Indexed keywords

EID: 30444449967     PISSN: 09544828     EISSN: 14661837     Source Type: Journal    
DOI: 10.1080/09544820500275511     Document Type: Review

References (76)

1. Abdalla, H.S., Development of a design for manufacture concurrent engineering system. PhD Thesis, De Montfort University, UK, 1995.
2. Abdalla, H.S., A constraint knowledge based system for supporting a mechatronics design environment. Proceedings of the 14th International Conference on Production Research, Osaka, Japan, 4-8 August 1997, pp. 842-845.
3. Abdalla, H.S. and Ikonopisov, A., Automated feature recognition for process planning. Proceedings of the Ninth National Conference on Manufacturing Research, Bath, 8-10 September 1993, pp. 32-36.
4. Abdalla, H.S. and Knight, J.A.G., Simultaneous/concurrent engineering-a competitive strategy. Proceedings of Eleventh Conference of the Irish Manufacturing Committee-Lean Production; from Concept-to-Product, Belfast, 31 August-2 September 1994, pp. 25-32.
5. Abdalla, M.S., Goulden, C. and Pancholi, H., A knowledge based process quality control planning system for design for manufacturability. Proceedings of the Tenth National Conference on Manufacturing Research, Loughborough, 5-7 September 1994, pp. 467-471.
6. Abu-Bakar, A.M., Smith, D.J. and Sapuan, S.M., The roles of small and medium enterprises (SMEs) to support large industries in the context of Malaysian economy. Malaysian Management Rev., 1997, 32(4), 11-17.
7. Adams, D.R., Process modeling in concurrent engineering. Automotive Engineer, 1991, 16(6), 36-37.
8. Anonymous, Concept to customer. Employee information brief, The Ford of Europe, 1989.
9. Anonymous, Design integrated manufacturing. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, pp. 69-72, 1990 (Society of Manufacturing Engineering: Dearborn, MI).
10. Anonymous, Automotive interiors, plugging the gap. Eur. Plastics News, 1996, 23(1), 35.
11. Bayly, R. and Barney, G., Analysis software and the time compression process. Rapid News, 1995, 3(3), 10-16.
12. Bokulich, F., Simulation: redefining the development process. Automotive Eng. Int., 2001, 109(5), 63-68.
13. Braunsperger, M., Designing for quality - an integrated approach for concurrent quality engineering. Proc. Inst. Mech. Eng. B J. Eng. Manufact., 1996, 210(B1), 1-10.
14. Buchholz, K., Simultaneous engineering saves time and money. Automotive Eng., 1996, 104(11)97-99.
15. Buchholz, K., Knowledge-based engineering puts Lotus Elise on I.C.E. Automotive Eng., 1997, 105(1), 101-102.
16. Burman, R., Designing for minimum lead times. Automotive Eng., 1992, 17(2), 61-65.
17. Chin, K. and Wong, T.N., Knowledge-based evaluation for the conceptual design development of injection moulding parts. Eng. Application Artificial Intelligence, 1996, 9(4), 359-376.
18. Clarke, R.B., Incorporating sophisticated analysis at the design concept stage. Design Studies, 1987, 8(4), 217-223.
19. Coffmann, C., Getting design and manufacturing together-simultaneously. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 82-84 (Society of Manufacturing Engineering: Dearborn, MI).
20. Colton, J.S., An intelligent design for manufacture system. In Concurrent Engineering: Automation, Tools and Techniques, edited by A. Kusiak, 1993, pp. 153-176 (John Wiley and Sons: New York).
21. Compton, W.D. and Gjostein, N.A, Materials for ground transportation. Sci. Am., 1986, 225(4), 75-82.
22. Costanzo, L., Concurrent engineering: working as one. Vehicle Eng. Design Suppl. Eng., 1992, 233(1), 7-8.
23. Cox, A. and Thompson, I., On the appropriateness of benchmarking. J. Gen. Manage., 1998, 23(3), 1-20.
24. Darus, K., Automotive engineering capabilities: an overview. Proceedings of National Engineering Education Workshop 1: The Role of Industry in Development of Engineering Education, Bangi, Selangor, Malaysia, 27 July 1999, pp. 1-11.
25. Demiri, M.Y., Expert systems in forming processes. Expert System Application in Materials Processing and Manufacturing, Proceedings of TMS Annual Meeting and Symposium, Anaheim, CA, 18-22 February 1990, pp. 19-25.
26. Dong, A. and Agogino, A.M., Text analysis for constructing design representations. Artificial Intelligence Eng., 1997, 11(2), 65-75.
27. Dubensky, R.G., Simultaneous automotive engineering-fact and fiction. SAE 922115, 1992a.
28. Dubensky, R.G., Simultaneous engineering of automotive systems-analytical techniques. SAE 922137, 1992b.
29. Dubensky, R.G., Simultaneous engineering of powertrain subsystems-design aspects. SAE 932894, 1993a.
30. Dubensky, R.G., Simultaneous engineering of systems. SAE 932888, 1993b.
31. Dubensky, R.G. and Salansky, R.K., Plastic product implementation into production-steps from concepts to production reality. SAE 922136, 1992.
32. Dubensky, R.G., Jay, D.E. and Salansky, R.K., Process driven design of a plastic bumper beam. Proceedings of the Fifth Annual ASM/ESD Advanced Composite Conference, Dearborn, MI, 25-28 September 1989, pp. 29-32.
33. Dwivedi, S.N., Sharan, R., Prasad, R. and Garg, R., Simultaneous Engineering-Why and What?, 1990, pp. 142-148 (Institute of Electrical and Electronics Engineers, Computer Society).
34. Edalew, K.O., Abdalla, H.S. and Nash, R.J., A computer-based intelligent system for automotic tool selection. Mater, Design, 2001, 22(6), 337-351.
35. Farish, M., Driving force. Engineering, 1995a, 236(7), 3-15.
36. Farish, M., Fast track. Engineering, 1995b, 236(9), 11-12.
37. Foreman, J.W., Gaining competitive advantage by using simultaneous engineering to integrate your engineering, design, and manufacturing resources. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 92-106 (Society of Manufacturing Engineering: Dearborn, MI).
38. Francis, F.H., Toward a science of manufacturing. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 8-13 (Society of Manufacturing Engineering: Dearborn, MI).
39. Harrington, J.V., Soltan, H. and Forskitt, M., Framework for knowledge based support in a concurrent engineering environment. Knowledge-Based Systems, 1996, 9(3), 207-215.
40. Huh, Y. and Kim, S., A knowledge-based CAD system for concurrent product design in injection moulding. Int. J. Comput. Integrated Manufacturing, 1991, 4(4), 209-218.
41. Korde, U., Planning for process variation. Automotive Eng., 1997, 105(4), 32.
42. Lucas, G.G., The motor car in the year 2000. Proc. Inst. Mech. Eng., 1983, 198D(7), 83-86.
43. Madsen, C., A case study of simultaneous engineering. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 245-259 (Society of Manufacturing Engineering: Dearborn, MI).
44. Marshall, R. and Leaney, P.G., Modularisation as a means of product and process integration. Proceedings of the Eleventh National Conference on Manufacturing Research, Leicester, 12-14 September 1995, pp. 124-133.
45. Matterazzo, J.P. and Ardayfio, D.D., Application of design for manufacture to the development of a new front suspension system. SAE 922124, 1992.
46. Miles, B.L. and Swift, K.G., Working together. Manufacturing Breakthrough, 1992, 4, 69-73.
47. Muhamad, M.R., Customer-oriented design of engineering curriculum. Proceedings of International Conference on Global Challenges in Engineering Education-Role of Islamic Countries, Kuala Lumpur, 8-10 July 1997, pp. 79-83.
48. Nagy, G., Organizing the engineer's toolbox. SAE 930836, 1993.
49. Nielsen, N.P.H. and Holmstrom, J., Design for speed: a supply chain perspective on design for manufacturability. Comput. Integrated Manufacturing Systems, 1995, 8(3), 223-228.
50. Olson, G.R., Cutkosky, M. and Tenenbaum, J.M., Collaborative engineering based on knowledge sharing agreements. Concurrent Eng. Res. Application, 1995,3(2), 145-159.
51. Pham, D.T. and Dimov, S.S., An approach to concurrent engineering. Proc. Inst. Mech. Eng. B J. Eng. Manufacture, 1998, 212(B1), 13-27.
52. Ponticel, P., Integrated product process development. Automotive Eng., 1996, 204(10), 103-104.
53. Ponticel, P., VA/VE for better products. Automotive Eng., 1997, 105(7), 99-100.
54. Prasad, B., Review of QFD and related deployment techniques. J. Manufacturing Systems, 1998, 17(3), 221-234.
55. Price, A.L., Composites design and manufacture: one and the same. Mater. Eng., 1991, 102(1), 25-28.
56. Ranky, B., Simultaneous engineering. In Simultaneous Engineering: Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 3-4 (Society of Manufacturing Engineering: Dearborn, MI).
57. Ranky, P.G., Concurrent engineering and enterprise modeling. Assembly Automation, 1994, 14(3), 14-21.
58. Rosen, D.W., Towards automated construction of molds and dies. Proceedings of the 1994 ASME International Computers in Engineering Conference and Exhibition, Minneapolis, MI, 11-13 September 1994, pp. 317-326.
59. Sapuan, S.M., Aconcurrent engineering approach to the design of fibre reinforced plastics for automotive pedal system. Proceedings of the Fourth International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, 24-28 August 1998a, pp. 1083-1090.
60. Sapuan, S.M., A concurrent engineering design system for polymeric-based composite automotive components. PhD thesis, De Montfort University, Leicester, UK, 1998b.
61. Sapuan, S.M., Fibre reinforced plastics in automotive pedal boxes. Polym. Polym. Composites, 1999, 7(6), 421-430.
62. Sapuan, S.M., A knowledge-based system for materials selection in mechanical engineering design. Mater. Design, 2001, 22(8), 687-695.
63. Sapuan, S.M. and Abdalla, H.S., A concurrent engineering polymeric-composite system for automotive components. Proceedings of the First International Post Graduate symposium on Knowledge exchange-Manufacturing, Logistics and Management, Loughborough, 24 July 1997, pp. 40-50.
64. Sapuan, S.M. and Abdalla, H.S., Prototype knowledge based system of material selection for polymeric based composite automotive components. Composites A Appl. Sci. Manufacturing, 1998, 29A(7), 731-742.
65. Sapuan, S.M., Abdalla, H.S. and Nash, R.J., The proposed design and manufacturing techniques for polymeric based composite pedal box system. Proceedings of the 11th National Conference on Manufacturing Research, Leicester, 12-14 September 1995, pp. 77-81.
66. Sapuan, S.M., Abdalla, H.S. and Nash, R.J., An expert system of polymeric composite automotive pedal box system. Proceedings of the Fifth International Conference on Automated Composites, Glasgow, UK, 4-5 September 1997, pp. 373-380.
67. Steward, P.J., Rapid engine development system for internal combustion engines: from concept to production validation. SAE 940660, 1994.
68. Trego, L., Simultaneous engineering tools. Automotive Engineering, 1997, 104(11), 100-105.
69. Trego, L., Software tools target the entire design-to-manufacturing environment. Automotive Eng., 1998, 105(5), 111-115.
70. Tsuda, Y., QFD models for simultaneous engineering development process of automobile. Simultaneous Eng. Res. Application, 1995, 3(3), 213-220.
71. Vasilash, G.S., Simultaneous engineering, management's new competitive tool. Simultaneous Engineering; Integrating Manufacturing and Design, edited by C.W. Allen, 1990, pp. 50-55 (Society of Manufacturing Engineers: Dearborn, MI).
72. Warwick, M., Partners in design. Product. Eng., 1988, December/January, 60-62.
73. Wright, I., Design Methods in Engineering and Product Design, 1998 (McGraw-Hill Publishing Company: Maidenhead).
74. Yeh, R.T., Notes on concurrent engineering. IEEE Trans. Knowledge Data Eng., 1992, 4(5), 407-414.
75. Youssef, M.A., Design for manufacturability and time-to-market. Int. J. Operat, Product. Manage., 1994, 14(12), 6-12.
76. Zuber, P.J., CAE processing analysis of plastic fenders. SAE 922116, 1992.