Influences of tensile deformation rate on deformation and morphology of injection molded 15/85 (by weight) PC/PE and PET/PE blends with high interfacial contact

Journal of Macromolecular Science - Physics

Volumn 43 B, Issue 3, 2004, Pages 519-542

  Li, Zhong Ming ^a   Yang, Wei ^a   Xie, Bang Hu ^a   Huang, Rui ^a   Yang, Ming Bo ^a   Feng, Jian Min ^a  

^a SICHUAN UNIVERSITY   (China)

Author keywords

Interfacial contact; Lower melting temperature component processing; Plastic deformation; Poly(ethylene terephthalate) (PET) polyethylene (PE) and polycarbonate (PC) polyethylene blends; Tensile rate

Indexed keywords

COMPRESSION MOLDING; INJECTION MOLDING; PLASTIC DEFORMATION; POLYCARBONATES; POLYETHYLENE TEREPHTHALATES; POLYETHYLENES; TENSILE STRENGTH;

INTERFACIAL CONTACT; LOWER-MELTING TEMPERATURE COMPONENT PROCESSING; POLYETHYLENE BLENDS; TENSILE RATE;

POLYMER BLENDS;

EID: 3042677639     PISSN: 00222348     EISSN: None     Source Type: Journal    
DOI: 10.1081/MB-120029786     Document Type: Article

References (32)

1. Karger-Kocsis, J.; Csikai, I. Skin-core morphology and failure of injection-molded specimens of impact-modified polypropylene blends. Polym. Eng. Sci. 1987, 27, 241-253.
2. Fisa, B.; Favis, B.D.; Bourgeois, S. Injection molding of polypropylene/polycarbonate blend. Polym. Eng. Sci. 1990, 30 (17), 1051-1055.
3. Favis, B.D. Factors influencing the morphology of immiscible polymer blends in melt processing. In Polymer Blends Volume 1: Formulation; Paul, D.R., Bucknall, C.D., Eds.; John Wiley & Sons: New York, 2002; 502-537.
4. Fellahi, S.; Favis, B.D.; Fisa, B. Morphological stability in injection-moulding high-density polyethylene/polyamide-6 blends. Polymer 1996, 37 (13), 2615-2626.
5. Son, Y.; Ahn, K.H.; Char, K. Morphology of injection molded modified poly(phenylene oxide)/polyamide-6 blends. Polym. Eng. Sci. 2000, 40 (6), 1376-1384.
6. Fellahi, S.; Fisa, B.; Favis, B.D. Tensile dilatometry of injection-moulded HDPE/ PA6 blends. J. Mater. Sci. 1995, 30, 5522-5530.
7. Fellahi, S.; Fisa, B.; Favis, B.D. Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. J. Appl. Polym. Sci. 1995, 57, 1319-1332.
8. Monticciolo, P.; Cassagnau, A.; Michiel, A. Fibrillar morphology development of PE/PBT blends: rheology and solvent permeability. Polym. Eng. Sci. 1998, 38, 1882-1889.
9. Boyaud, M.F.; Ait-Kadi, A.; Bousmina, M.; Michel, A.; Cassagnau, P. Organic short fibre/thermoplastic composites: morphology and thermorheological analysis. Polymer 2001, 42, 6515-6526.
10. Evstatiev, M.; Fakirov, S.; Bechtold, G.; Friedrich, K. Structure-property relationships of injection- and compression-molded microfibrillar-reinforced PET/PA-6 composites. Adv. Polym. Tech. 2000, 19, 249-259.
11. Li, Z.M.; Fu, X.R.; Yang, M.B.; Yang, W.; Feng, J.M.; Huang, R. Deformation and morphology development of poly(ethylene terephthalate)/ polyethylene and polycarbonate/polyethylene blends with high interfacial contact during elongation. Polym. Eng. Sci. 2004, in press.
12. Stachurski, Z.H. Deformation mechanism and yield strength in amorphous polymers. Prog. Polym. Sci. 1997, 22, 407-474.
13. Jung, Y.L.; Henry, J.D.; Sang, Y.K. Strain rate, temperature, and microstructure-dependent yield stress of poly(ethylene terephthalate). Macromol. Chem. Phys. 2003, 204, 653-660.
14. Li, Z.M.; Yang, M.B.; Lu, A.; Xie, B.H.; Feng, J.M.; Huang, R. On deformation of poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends with high interfacial contact during elongation. J. Mater. Sci. Lett. 2002, 21, 1063-1067.
15. Lee, M.P.; Hiltner, A.; Baer, E. Formation and break-up of a bead-and-string structure during injection molding of a polycarbonate/ acrylonitrile-butadiene-styrene blend. Polymer 1992, 33, 675-685.
16. Leclair, A.; Favis, B.D. Role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties. Polymer 1996, 37, 4723-4728.
17. Kunori, T.; Geil, P.H. Morphology-property relationships in polycarbonate-based blends. 1. Modulus. J. Macro. Sci.-Phys. 1980, B18, 93-134.
18. Kunori, T.; Geil, P.H. Morphology-property relationships in polycarbonate-based blends. 2. Tensile and impact strength. J. Macro. Sci. - Phys. 1980, B18, 93-134.
19. Li, Z.G.; Narh, K.A. Experimental determination and numerical prediction of mechanical properties of injection molded self-reinforcing polymer composites. Composites: Part B 2001, 32, 103-109.
20. Friedrich, K.; Ueda, E.; Kamo, H.; Evstatiev, M.; Krasteva, B.; Fakirov, S. Direct electron microscopic observation of transcrystalline layers in microfibrillar reinforced polymer-polymer composites. J. Mater. Sci. 2002, 37, 4299.
21. Min, K.; White, J.L. Development of phase morphology in incompatible polymer blends during mixing and its variation in extrusion. Polym. Eng. Sci. 1984, 24, 1327-1336.
22. Zeng, N.; Bai, S.L.; G'Sell, C.; Hiver, J.M.; Mai, Y.W. Study on the microstructures and mechnical behaviour of compatibilized polypropylene/ polyamide-6 blends. Polym. J. 2002, 51, 1439-1447.
23. Heino, M.; Hietaoja, P.; Seppala, J.; Harmia, T.; Friedrich, K. Study on fracture behavior of tough PA6/PP blends. J. Appl. Polym. Sci. 1997, 66, 2209-2220.
24. Ajji, A.; Chapleau, N. Structure and properties of impact modified polyethylene terephthalate. J. Mater. Sci. 2002, 37, 3893-3901.
25. Vhattacharyya, A.R.; Maiti, S.N.; Misra, A. Mechanical properties and morphology of PA6/EVA blends. J. Appl. Polym. Sci. 2002, 85, 1593-1606.
26. Matsushige, K.; Radcliffe, S.V.; Baer, E. Pressure and temperature effects on brittleto-ductile transition in PS and PMMA. J. Appl. Polym. Sci. 1976, 20, 1853-1866.
27. Kalfoglou, N.K.; Skafidas, D. Blends of poly(ethylene terephthalate) with unmodified and maleic anhydride grafted acrylonitrile-butadiene-styrene terpolymer. J. K. Polymer 1996, 37, 3387-3395.
28. Dompas, D.; Groeninckx, G.; Isogawa, M.; Hasegawa, T.; Kadokura, M. Cavitation versus debonding during deformation of rubber-modified poly(vinyl chloride). Polymer 1995, 36, 437-441.
29. Halsey, G.; White, H.J.; Eyring, H. Text. Res. J. 1945, 15, 295.
30. Robertson, R.E. J. Chem. Phys. 1966, 44, 3950.
31. Kurauchi, T.; Ohta, T. Energy absorption in blends of polycarbonate with ABS and SAN. J. Mater. Sci. 1984, 19, 1699-1709.
32. Koo, K.K.; Inoue, T.; Miyasaka, K. Toughened plastics consisting of brittle particles and ductile matrix. Polym. Eng. Sci. 1985, 25, 741-746.