International society for rock mechanics commission on standardization of laboratory and field tests. Suggested methods for the quantitative description of discontinuities in rock masses

International Journal of Rock Mechanics and Mining Sciences and

Volumn 15, Issue 6, 1978, Pages 319-368

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 3042672216     PISSN: 01489062     EISSN: None     Source Type: Journal    
DOI: 10.1016/0148-9062(78)91472-9     Document Type: Note

References (186)

1. Some applications of the new integral sampling method in rock masses
2. The analysis of aggregates of orientation data in the earth sciences
3. Regional study of jointing in the Comb Ridge-Navajo Mountain area, Arizona and Utah
4. An approach to rock mechanics
5. A procedure for rapid plotting of point diagrams
6. Sources of error in joint surveys
7. Jointing in the Appalachian Plateau of Pennsylvania
8. Graphical stability of slopes in jointed rock
9. Graphical stability of slopes in jointed rock
10. Fracture studies at the Kimberley Pit
11. Significant geological factors in rock slope stability
12. Geological factors significant to the stability of slopes cut in rock
13. The interpretation of geological factors for use in slope theory
14. The engineering geology of the Cruachan underground power station
15. Regional jointing in Southern Alberta
16. Note: A modified transit for measuring strike on the underside of surfaces
17. Characterizing and extrapolating rock properties in engineering practice
18. A Bureau of Mines direct reading azimuth protractor
19. The effect of natural geologic discontinuities on behaviour of rock in tunnels
20. Bermekanikk
21. A composite net for rock slope stability
22. Terrestial photogrammetry in open pits: 2—an aid to geological mapping
23. Terrestrisch-photogrammetrische Kluftmessung
24. Sources of error in joint surveys
25. Terrestial Photogrammetry for Geological Purposes
26. Terrestial photogrammetry: a valuable tool for engineering geological purposes
27. Stereophotography and open pit mine design
28. The application of photogrammetry to the stability of excavated rock slopes
29. Terrestial photogrammetry in open pits: 1—description and use of the phototheodolite in mine surveying
30. Aspects of slope design in open pit mining
31. Sources of error in joint surveys
32. Computer estimation of oriented fracture set intensity
33. Qualitative characterization of the geometric parameters of jointing in rock masses
34. Geological structural analysis for open pit slope design, Kimberley pit, Ely, Nevada
35. Geotechnical assessment of a site at Mundford, Norfolk, for a large proton accelerator
36. Fracture studies at the Kimberley pit
37. Geological factors significant to the stability of slopes cut in rock
38. The interpretation of geological factors for use in slope theory
39. The application of the seismic refraction technique to the study of fracturing of the Middle Chalk at Mundford Norfolk
40. Characterizing and extrapolating rock properties in engineering practice
41. Discontinuity spacings in rock
42. Characterizing and extrapolating rock joint properties in engineering practice
43. The interpretation of geological factors for use in slope theory
44. An analysis of rock structure and fabric in the CSA Mine, Cobar, NSW
45. Design of rock slopes against sliding on pre-existing fractures
46. A mathematical theory for the calculation of the stability of slopes in open cast mines
47. Regional study of jointing in the Comb. Ridge-Navajo Mountain area, Arizona and Utah
48. An approach to rock mechanics
49. Indices related to the mechanical properties of jointed rock
50. Jointing in the Appalachian Plateau of Pennsylvania
51. Geological structural analysis for open pit slope design. Kimbley Pit, Ely, Nevada
52. Geological factors significant to the stability of slopes cut in rock
53. Regional jointing in Southern Alberta
54. Properties of rock and rock masses. (General report.)
55. Describing the size of discontinuities
56. Measurement of large scale roughnesses of rock planes by means of profilograph and geological compass
57. Geologische Kartierung des Gebietes nordwestlich von Neustadt Weinstrasse sowie Bau und Anwendung eines Profilographen
58. Influence of the surface roughness on the friction properties of rock planes
59. A relationship between joint roughness and joint shear strength
60. The shear strength of rock joints in theory and practice
61. Review of a new shear-strength criterion for rock joints
62. Multiple modes of shear failure in rock and related materials
63. Significant geologic factors in rock slope stability
64. Geological factors significant to the stability of slopes cut in rock
65. Unebenheit und Reibungswiederstand von Gesteinstrennflächen
66. The application of photogrammetry to the stability of excavated rock slopes
67. Terrestial photogrammetry in open pits: 2- an aid to the geological mapping
68. Rock friction—a laboratory investigation
69. The shear strength of joints in weathered rock
70. The friction and deformation behaviour of rock joints
71. Engineering classification and index properties for intack rock
72. A rapid method of determining the strength of rocks in situ
73. The stability of slopes cut into natural rock
74. Some engineering aspects of rock weathering with field examples from Dartmoor and elsewhere
75. Significant geologic factors in rock slope stability
76. Geological factors significant to the stability of slopes cut in rock
77. The interpretation of geological factors for use in slope theory
78. Geological Society Engineering Group Working Party Report on “The preparation of maps and plans in terms of engineering geology”
79. Suggested methods for determining water content, porosity, density, absorption and related properties and swelling and slake-durability index properties
80. Review of a new shear-strength criterion for rock joints
81. Rock quality in relation to the quarrying and performance of rock construction materials
82. Joint strength characteristics of a weathered rock
83. The shear strength of joints in weathered rock
84. The shear strength of rock joints in theory and practice
85. Estimation of rock mass permeability by hydraulic fracturing—a suggestion. Discussion
86. Some applications of the new integral sampling method in rock masses
87. Beobachtungen über Art, Anordnung und Ausdehnung von Kluftöffnungen
88. Fundamental considerations on the hydraulic characteristics of joints in rock
89. Correlations of rockbolt—shotcrete support and rock quality parameters in Scandinavian tunnels
90. Genesis und quantitative Characteristik der Klüftigkeit (in Bezug auf den Wasserbau)
91. Drainage problem in connection with tunnel construction in Precambrian granitic bedrock (in Sweden)
92. Discussion
93. Geomechanics classification of rock masses and its application in tunneling
94. Engineering geological rock classification (in Finnish)
95. Stability problems in underground construction caused by montmorillonite-carrying joints and faults
96. Some observations on tectonic shear zones
97. The strength along structural discontinuities in stiff clays
98. Correlations of rock bolt-shotcrete support and rock quality parameters in Scandinavian tunnels
99. Stability problems caused by seams and faults
100. The foliation shear zone—an adverse engineering geologic feature of metamorphic rocks
101. A review of the shear strength of filled discontinuities in rock
102. Engineering classification of rock masses for the design of tunnel support
103. The effect of natural geologic discontinuities on behaviour of rock in tunnels
104. The characteristization of rock of civil engineering practice in Britain
105. Suggested methods for determining shear strength
106. About swelling tests and stability of clay zones in hard rock
107. Control of seepage through foundations and abutments of dams
108. Stability of steep slopes on hard unweathered rock
109. The rock slide in the Vajont Valley
110. La stabilité des massifs rocheux: application aux barrages
111. Rock fracture spacing, opening, and porosities
112. Drainage characteristics of sub-surface galleries
113. Proc. of 2nd. Cong. of Int. Soc. Rock Mech.
114. Correlations of rock bolt-shotcrete support and rock quality parameters in Scandinavian tunnels
115. Significance of groundwater at rock constructions of different types
116. Influence of groundwater on the stability of rock masses: 1-hydraulics within rock masses
117. Beobachtungen über Art, Anordning und Ausdehnung von Kluftöfnungen
118. Drainage problem in connection with tunnel construction in Precambrian granitic bedrock
119. Reconnaissance des massifs rocheux par sondages et classifications géotechniques de roches
120. Rock mechanics in open pit mining
121. The transient groundwater pressure response to rainfall and the prediction of rock slope instability
122. Regional study of jointing in the Comb Ridge Navajo Mountain area, arizona and Utah
123. An approach to rock mechanics
124. Jointing in the Appalachain Plateau of Pennsylvania
125. Correlations of rock bolt-shotcrete support and rock quality parameters in Scandinavian tunnels
126. Geological factors significant to the stability of slopes cut in rock
127. The interpretation of geological factors for use in slope theory
128. Regional jointing in Southern Alberta, Canadian
129. Engineering classification of rock masses for the design of tunnel support
130. An approach to rock mechanics
131. Characterizing and extrapolating rock joint properties in engineering practice
132. Rock quality in relation to the quarrying and performance of rock construction materials
133. Logging the mechanical character of rock
134. Rock fracture, spacing, opening, and porosities
135. Sources of error in rock mechanics field measurements and related solutions
136. Technical description of rock cores for engineering purposes
137. The recording and interpretation of geological conditions in the foundations of the Roseires Kariba and Latiyan dams
138. Sources of error in joint surveys
139. Design of surface and near-surface construction in rock
140. Diamond drilling for foundation exploration
141. Stability index for underground structures in granite rock in Nevada Test Site
142. Geotechnical assessment of a site at Mundford, Norfolk, for a large proton accelerator
143. Engineering classification of in situ rock
144. Working Party Report on “The logging of rock cores for engineering purposes”
145. Some applications of the new integral sampling method in rock mechanics
146. Rock mass investigation in depth: reliability of different methods for drillhole investigations
147. The characterization of rock for civil engineering practice in Britain
148. Rock quality in relation to the quarrying and performance of rock construction materials
149. A method for determining the degree of fissuration of rock
150. Reconnaissance des massifs recheux par sondages et classifications géotechniques de roches
151. A suggested field system for logging rock cores for engineering purposes
152. The application of computer techniques for the manipulation and storage of exploratory borehole data
153. Discontinuity spacings in rock
154. Rock engineering testing in exploratory boreholes
155. A guide to core logging for rock engineering