The study of morphology, thermal and thermo-mechanical properties of compatibilized TPU/SAN blends

Polymer Engineering and Science

Volumn 44, Issue 5, 2004, Pages 838-852

  Ulcnik Krump, M ^a,c   De Lucca Freitas, L ^b  

^a NATIONAL INSTITUTE OF CHEMISTRY   (Slovenia)

^b FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^c UNIVERSITY OF MARIBOR   (Slovenia)

Author keywords

[No Author keywords available]

Indexed keywords

DIFFERENTIAL SCANNING CALORIMETRY; GRAFT COPOLYMERS; MIXING; MIXTURES; MORPHOLOGY; POLYACRYLONITRILES; POLYBUTADIENES; POLYMETHYL METHACRYLATES; POLYSTYRENES; POLYURETHANES; SYNTHESIS (CHEMICAL); THERMOANALYSIS; THERMOPLASTICS;

COMPATIBILIZATION; COMPATIBILIZERS; MELT MIXING;

POLYMER BLENDS;

EID: 3042528902     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.20075     Document Type: Article

References (54)

1. S. Datta and D. J. Loshe, Polymeric Compatibilizers: Uses and Benefits in Polymer Blends, Carl Hanser Verlag, Munich (1996).
2. A. Ajji and L. A. Utracki, Prog. Rubb. Plast. Technol., 13, 153 (1997).
3. M. J Folkes and P. S. Hope, Polymer Blends and Alloys, Blackie Academic&Professional, London (1993).
4. L. Leibler, Makromol. Chem., Macromol. Symp., 16, 1 (1998).
5. D. G. Bucknall, J. S. Higgins, and S. Rostami, Polymer, 23, 4419 (1992).
6. K. R. Shull, Macromolecules, 26, 2346 (1993).
7. C. Yeung, R. C. Desai, and J. Noolandi, Macromolecules, 27, 55 (1994).
8. S. H. Anastasiadis, I. Gancarz, and J. T. Koberstein, Macromolecules, 22, 1449 (1989).
9. M. Ulcnik-Krump, Ph.D. thesis. University of Ljubljana, Slovenia (1999).
10. M. Iskandar, C. Tran, and J. E. McGrath, Poly. Prep. Am. Chem. Soc., 24, 126 (1983).
11. M. Ratzch, G. Handel, G. Pompe, and E. Meyer, J. Macromol Set A., 27, 1631 (1990).
12. S. Sack and G. Haudel, Angew. Makromol Chem., 3015, 131 (1990).
13. H-J. Radusch, R. Hendrich, G. H. Michler, and I. Naumann, Angew. Makromol Chem., 3254, 159 (1992).
14. J. Xie, H. Ye, Q. Zhang, L. Li, and M. Jiang, Polym. Int. 44, 35 (1997).
15. B. Žerjal and T. Malavašic, Blends (Thermoplastic Polyurethane-SAN): Polymeric Materials Encyclopedia, Vol. 1, CRC Press, Inc. (1996).
16. B. Žerjal, V. Musil, Z. Jelcic, I. Šmit, and T. Malavašic, Int. Polym. Process., VII, 2, 123 (1992).
17. B. Žerjal, V. Musil, I. Šmit, Z. Jelcic, and T. Malavašic, J. Appl. Polym. Sci., 50, 719 (1993).
18. B. Žerjal, Z. Jelcic, and T. Malavašic, Eur. Polym. J., 32, 1351 (1996).
19. E. Meitzner, H. Goering, and R. Becker, Angew. Makromol Chem., 220, 177 (1994).
20. M. Ulčnik, B. Zerjal, and T. Malavašic, Thermochim. Acta, 276, 175 (1996).
21. L. Zeman and D. Patterson, Macromolecules, 5, 513 (1972).
22. A. Kanapitsas, P. Pissis, A. Garcia-Esterella. and M. Ulčnik-Krump, IEE Conf. Publ., 430, Dielectric Materials, Measurements and Applications, 230 (1996).
23. R. Van Cleve, G. H. Armstrong, and D. W. Simroth, U.S. Pat. 4,350,780, Union Carbide (1982).
24. V. Jaanarthann, J. Kessler, F. E. Karasz, and W. J. MacRnight, J. Polym. Sci., Phys. Ed., 32, 1013 (1993).
25. P. Svoboda, J. Kressler, T. Ougizawa, T. Moue, and K. Ozutsumi, Macromolecules, 30, 1975 (1997).
26. Z. Wang and B. Jiang, Macromolecules, 30, 6223 (1997).
27. M. Suess, J. Kressler, and H. W. Kammer, Polymer, 28, 957 (1987).
28. J. M. G. Cowie and D. Lath, Macromol Chemie., Macromol Symp., 16, 103 (1988).
29. E. M. Folwer, J. W. Barlow, and D. R. Paul, Polymer, 28, 2145 (1987).
30. C. Neumann, Ph.D. thesis, Johannes Gutenberg University, Mainz, Germany (1996).
31. V. Balsamo, F. von Gyldenfeldt, and R. Stadler, Macromol Chem. Phys., 197, 1159 (1996).
32. C. Auschra and R. Stadler, Polymer Bulletin, 30, 257 (1993).
33. H. Yuki and Y. Okamoto, Bull. Chem. Soc. Jpn., 43, 148 (1970).
34. R. J. Young and P. A. Lovell, Introduction to Polymers, 2nd Ed., Chapman&Hall, London (1991).
35. D. Quintens, G. Groeninckx, M. Guest, and L. Aerts, Polym. Eng. Sci., 30, 1488 (1990).
36. E. K. Boylston and M. L. Rollins, Microscope, 19, 255 (1971).
37. M. A. Hayat, Positive Staining for Electron Microscopy, Van Nostrand Reinhold, New York (1975).
38. S. Eckert-Rectanus, Ph.D. thesis, Johannes Gutenberg University, Mainz, Germany (1995).
39. C. Neumann, D. R. Loveday, V. Abetz, and R. Stadler, Macromolecules, 31, 2493 (1998).
40. C. B. Wang and S. L. Cooper, J. Appl. Polym. Sci., 26, 2989 (1981).
41. D. J. Hourston and L. D. Hughes, J. Appl. Polym. Sci., 26, 3467 (1981).
42. F. Xiao, D. Shen, X. Zhang, S. Hu, and M. Xu, J. Polymer, 28, 2335 (1987).
43. J. Ferguson and N. Ahmad, Eur. Poly. J., 13, 865 (1977).
44. R. A. Philips, J. Casteles Stevenson, M. J. Nagarjan, and S. L. Cooper, J. Macromol Sci., Phys., B27, 245 (1988).
45. L. A. Utracki, Polymer Alloys and Blends, Hanser Verlag, Munich (1989).
46. L. M. Cruz-Orive, J. Macrosc., 107, 235 (1976).
47. U. Sundararaj and C. Macosko, Macromolecules, 28, 2647 (1995).
48. H. E. Exner and H. P. Hougardy, ed., Quantitative Image Analysis of Microstructures, DGM Informationgesellshaft mbH, Germany (1988).
49. S. Wu, Polymer, 26, 1855 (1985).
50. S. Wu, J. Polym. Sci., Phys. Ed., 21, 699 (1983).
51. P. G. Ghodgaonkar and U. Sundararaj, Polym. Eng. Sci., 36, 1656 (1996).
52. S. Wu, Polym. Eng. Sci., 27, 335 (1987).
53. S. Wu, Polymer Interface and Adhesion, Marcel Dekker, New York (1982).
54. Q. S. Bhatia, D. H. Pan, and J. T. Koberstein, Macromolecules, 21, 2166 (1988).