Golden anniversary of the AISI specification

International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction

Volumn , Issue , 1996, Pages 1-25

  Yu, Wei Wen ^a,b   Wolford, Don S ^c   Johnson, Albert L ^d  

^a Architectural and Environmental Engineering   (United States)

^b MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

^c NONE

^d Niobrara Eng and Research Company   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOWABLE STRESS DESIGN (ASD) METHOD; AMERICAN IRON AND STEEL INSTITUTE (AISI); COLD-FORMED STEEL MEMBERS; HOT-ROLLED STEEL CONSTRUCTION;

BEAMS AND GIRDERS; BUCKLING; BUILDING CODES; HOT ROLLING; SOCIETIES AND INSTITUTIONS; STRUCTURAL ANALYSIS; STRUCTURAL DESIGN;

STEEL STRUCTURES;

EID: 3042522747     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (75)

1. American Iron and Steel Institute (1946), Specification for the Design of Light Gage Steel Structural Members, New York, NY, April 1946.
2. American Iron and Steel Institute (1949), Light Gage Steel Design Manual, New York, NY, January 1949.
3. American Iron and Steel Institute (1956), Specification for the Design of Light Gage ColdFormed Steel Structural Members, New York, NY, 1956 Edition.
4. American Iron and Steel Institute (1956), Light Gage Cold-Formed Steel Design Manual, New York, NY, 1956 Edition.
5. American Iron and Steel Institute (1958), Commentary on the 1956 Edition of the Light Gage Cold-Formed Steel Design Manual, by G. Winter, New York, NY, February 1958.
6. American Iron and Steel Institute (1960), Specification for the Design of Light Gage Cold-Formed Steel Structural Members, New York, NY, 1960 Edition.
7. American Iron and Steel Institute (1961), Light Gage Cold-Formed Steel Design Manual, New York, NY, 1961 Edition.
8. American Iron and Steel Institute (1961), Commentary on the 1961 Edition of the Light Gage Cold-Formed Steel Design Manual, by G. Winter, New York, NY, April 1961.
9. American Iron and Steel Institute (1962), Specification for the Design of Light Gage ColdFormed Steel Structural Members, New York, NY, 1962 Edition.
10. American Iron and Steel Institute (1962), Light Gage Cold-Formed Steel Design Manual, New York, NY, 1962 Edition.
11. American Iron and Steel Institute (1962), Commentary on the 1962 Edition of the Light Gage Cold-Formed Steel Design Manual, by G. Winter, New York, NY, October 1962.
12. American Iron and Steel Institute (1968), Specification for the Design of Cold-Formed Steel Structural Members, Washington, D.C., 1968 Edition.
13. American Iron and Steel Institute (1968), Design of Light Gage Cold-Formed Stainless Steel Structural Members, New York, NY, 1968 Edition.
14. American Iron and Steel Institute (1968-72), Cold-Formed Steel Design Manual, Washington, D.C., 1968-1972.
15. American Iron and Steel Institute (1974), Stainless Steel Cold-Formed Structural Design Manual, Washington, D.C., 1974 Edition.
16. American Iron and Steel Institute (1977), Cold-Formed Steel Design Manual, Washington, D.C., 1977 Edition.
17. American Iron and Steel Institute (1980), Specification for the Design of Cold-Formed Steel 1 Structural Members, Washington, D.C., September 3, 1980 Edition.
18. American Iron and Steel Institute (1983), Cold-Formed Steel Design Manual, Washington, D.C., 1983 Edition.
19. American Iron and Steel Institute (1986), Specification for the Design of Cold-Formed Steel Structural Members, Washington, D.C., August 19, 1986 with December 11, 1986 Addendum.
20. American Iron and Steel Institute (1987), Cold-Formed Steel Design Manual, Washington D.C., March 1987.
21. American Iron and Steel Institute (1988), Decision Tables for Use with the August 19, 1986 Edition of the Specification for the Design of Cold-Formed Steel Structural Members, Report CF 88-1, Washington, D.C., October 1988.
22. American Iron and Steel Institute (1991), Load and Resistance Factor Design Specification for Cold-Formed Steel Structural Members, Washington, D.C., March 16, 1991 Edition.
23. American Iron and Steel Institute (1991), LRFD Cold-Formed Steel Design Manual, Washington, D.C., December 1991.
24. American Iron and Steel Institute (1993), Preliminary Design Guide for Cold-Formed C- and Z-Members, Report CF 93-1, Washington, D.C., June 1993.
25. American Iron and Steel Institute (1996), Specification for the Design of Cold-Formed Steel Structural Members, Washington, D.C., 1996 Edition.
26. American Iron and Steel Institute (1996), Cold-Formed Steel Design Manual, Washington, D.C., 1996 Edition.
27. American Society of Civil Engineers (1991), Specification for the Design of Cold-Formed Stainless Steel Structural Members, ANSI/ASCE-8-90, 1991.
28. Brockenbrough, R.L. (1966), "The 1996 AISI Specification," Proceedings of the Thirteenth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, MO, October 1996.
29. Center for Cold-Formed Steel Structures (1996), Cold-Formed Steel Design Computer Programs, University of Missouri-Rolla, Rolla, Mo., January 1996.
30. Errera, S.J., D.W. Popowich and G. Winter (1974), "Bolted and Welded Stainless Steel Connections," Journal of the Structural Division, ASCE, Vol. 100, No. ST6, June 1974.
31. Errera, S.J. (1990), "The 1989 Addendum to the AISI Specification," Proceedings of the Tenth International Specialty Conference on Cold-Formed Steel Structures, University of MissouriRolla, Rolla, Mo., Oct. 1990.
32. Fung, C. (1978), "Strength of Arc-Spot Welds in Sheet Steel Construction," Final Report to Canadian Steel Industries Construction Council (CSICC), Westeel-Rosco Limited, Canada, 1978.
33. Green, G.G., G. Winter and T. R. Cuykendall (1947), "Light Gage Steel Columns in Wall-Braced Panels," Bulletin, No. 35/2, Cornell University Engineering Experimental Station, 1947.
34. Hetrakul, N. and W.W. Yu (1978), "Structural Behavior of Beam Webs Subjected to Web Crippling and a Combination of Web Crippling and Bending," Final Report, University of Missouri-Rolla, Rolla, MO, June 1978.
35. Hsiao, L.E., W.W. Yu, and T. V. Galambos (1990), "AISI LRFD Method for Cold-Formed Steel Structural Members," Journal of Structural Engineering, ASCE, Vol. 116, No.2, February 1990.
36. Johnson, A.L. and G. Winter (1966), "Behavior of Stainless Steel Columns and Beams," Journal of the Structural Division, ASCE, Vol. 92, No. ST5, October 1966.
37. Johnson, A.L. (1978), "AISI's Cold-Formed Steel Design Specification," Proceedings of the Fourth International Specialty Conference on Cold-Formed Steel Structures; University of Missouri-Rolla, Rolla, Mo., June 1978.
38. Johnson, A.L. (1980), "AISI's Cold-Formed Steel Design Specification - Recent Changes," Proceedings of the Fifth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, Mo., November 1980.
39. Johnson, A.L. (1982), "Cold-Formed Steel: Research to Design," Proceedings of the Sixth International Specialty Conference on Cold-Formed Steel Structures, November 1982.
40. Johnson, A.L. (1986), "AISI's 1986 Cold-Formed Steel Design Specification - An Overview," Proceedings of the Eighth International Specialty Conference on Cold-Formed Steel Structures, November 1986.
41. Johnson, A.L. (1988), "Evolving AISI Design Provisions - An Overview," Proceedings of the Ninth International Specialty Conference on Cold-Formed Steel Structures, November 1988.
42. Kaehler, R.C. and P.A. Seaburg (1996), "A New AISI Cold-Formed Steel Design Manual," Proceedings of the Thirteenth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, MO, October 1996.
43. Karren, K.W. (1967), "Corner Properties of Cold-Formed Steel Shapes," Journal of the Structural Division, ASCE, Vol. 93, No. ST1, February 1967.
44. Karren, K.W. and G. Winter (1967), "Effects of Cold Work on Light Gage Steel Members," Journal of the Structural Division, ASCE, Vol. 93, No. ST1, February 1967.
45. LaBoube, R.A. and W.W. Yu (1982), "Bending Strength of Webs of Cold-Formed Steel Beams," Journal of the Structural Division, ASCE, Vol. 108, No. ST7, July 1982.
46. LaBoube, R.A., M. Golovin, D.J. Montague, D.C. Perry, and L.L. Wilson (1988), "Behavior of Continuous Span Purlin System," Proceedings of the Ninth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, MO, November 1988.
47. LaBoube, R.A. and M. Golovin (1990), "Uplift Behavior of Purlin Systems Having Discrete Braces," Proceedings of the Tenth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, MO, October 1990.
48. Murray, T.M. and S. Elhouar (1985), "Stability Requirements of Z-Purlin Supported Conventional Metal Building Roof Systems," Annual Technical Session Proceedings, Structural Stability Research Council, 1985.
49. Pinkham, C.W. (1986), "Reformatting the AISI Cold-Formed Steel Design Specification," Proceedings of the Eighth International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Rolla, MO, November 1986.
50. Pekoz, T.B. and G. Winter (1969), "Torsional-Flexural Buckling of Thin-Walled Sections under Eccentric Load," Journal of the Structural Division, ASCE, Vol. 95, No. ST5, May 1969.
51. Pekoz, T.B. and W. McGuire (1979), Welding of Sheet Steel, Report SG-79-2, American Iron and Steel Institute, Washington, D.C., January 1979.
52. Pekoz, T.B. (1986a), "Development of a Unified Approach to the Design of Cold-Formed Steel Members," Proceedings of the Eighth International Specialty Conference on Cold-Formed Steel Structures, November 1986.
53. Pekoz, T.B. (1986b), "Development of a Unified Approach to the Design of Cold-Formed Steel Members," Report SG-86-4, American Iron and Steel Institute, 1986.
54. Reck, H.P, T. Pekoz and G. Winter (1975), "Inelastic Strength of Cold-Formed Steel Beams," Journal of the Structural Division, ASCE, Vol. 101, No. ST11, November 1975.
55. Schuster, R.M. (1995), "North American Specification for the Design of Cold-Formed Steel Members," CCFSS NEWS, Vol. 6, No. 1, Center for Cold-Formed Steel Structures, University of Missouri-Rolla, August 1995.
56. Seaburg, P.A. (1971), "A Decision Table Formulation of the AISI Specification for the Design of Cold-Formed Steel Structural Members," University of Wisconsin, Milwaukee, July 1971.
57. Sirnaan, A. and T.B. Pekoz (1976), "Diaphragm-Braced Members and Design of Wall Studs," Journal of the Structural Division, ASCE, Vol. 102, No. ST1, January 1976.
58. Steel Deck Institute, Inc. (1981), Steel Deck Institute Diaphragm Design Manual, First Edition, Canton, OH, 1981.
59. Wang, S.T., S.J. Errera and G. Winter 1975), "Behavior of Cold-Rolled Stainless Steel Members, "Journal of the Structural Division, ASCE, Vol. 101, No. ST11, November 1975.
60. Winter, G. (1940), "Stress Distribution in and Equivalent Width of Flanges of Wide, Thin-Walled Steel Beams," Technical Note No. 784, National Advisory Committee for Aeronautics, Washington, D.C., 1940.
61. Winter, G. (1943), "Lateral Stability of Unsymmetrical I-Beams and Trusses," Transactions, ASCE, Vol. 198, 1943.
62. Winter, G. (1944), "Strength of Slender Beams," Transactions, ASCE, Vol. 109, 1944.
63. Winter G. and R.H.J. Pian (1946), "Crushing Strength of Thin Steel Webs," Cornell Bulletin 35, pt. 1, April 1946.
64. Winter, G. (1947), "Strength of Thin Steel Compression Flanges," Transactions, ASCE, Vol. 112, 1947.
65. Winter, G. (1956a), "Light Gage Steel Connections with High-Strength, High-Torqued Bolts," Publications, IABSE, Vol. 16, 1956.
66. Winter, G. (1956b), "Tests on Bolted Connections in Light Gage Steel," Journal of the Structural Division, ASCE, Vol. 82, No. ST2, February 1956.
67. Winter G. (1959a), "Development of Cold-Formed, Light Gage Steel Structures," AISI Regional Technical Papers, October 1, 1959.
68. Winter, G. (1959b), "Cold-Formed, Light Gage Steel Construction," Journal of the Structural Division, ASCE, Vol. 85, No. ST9, November 1959.
69. Winter, G. and J. Uribe (1968), "Effects of Cold-Work on Cold-Formed Steel Members," ThinWalled Steel Structures - Their Design and Use in Buildings, K.C. Rockey and H.V. Hill (Eds.), Gordon and Breach Science Publishers, United Kingdom, 1968.
70. Yener, M. and T.B. Pekoz (1985), "Partial Stress Redistribution in Cold-Formed Steel," Journal of Structural Engineering, ASCE, Vol. 111, No. 6, June 1985.
71. Yu, W.W. (1965), Design of Light Gage Cold-Formed Steel Structures, West Virginia University, March 1965.
72. Yu, W.W., V.A.S. Liu, and W.M. McKinney (1974), "Structural Behavior of Thick Cold-Formed Steel Members," Journal of the Structural Division, ASCE, Vol. 100, No. ST11, November 1974.
73. Yu, W.W. (1973), Cold-Formed Steel Structures, McGraw-Hill Book Company, New York, NY, 1973.
74. Yu, W.W. (1982), "AISI Design Criteria for Bolted Connections," Proceedings of the Sixth International Specialty Conference on Cold-Formed Steel Structures, University of MissouriRolla, Rolla, MO, November 1982.
75. Yu, W.W. (1985, 1991), Cold-Formed Steel Design, John Wiley and Sons, New York, NY, 1985 and 1991.