Racking performance of long steel-frame shear walls

International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction

Volumn , Issue , 2000, Pages 471-480

  Salenikovich, Alexander J ^a   Dolan, J Daniel ^a   Easterling, W Samuel ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COLD-FORMED STEEL STRUCTURES; ORIENTED STANDBOARD (OSB) SHEATHING; RACKING; STEEL FRAMES;

BENDING (DEFORMATION); CIVIL ENGINEERING; COMPUTATIONAL METHODS; CONSTRUCTION INDUSTRY; CYCLIC LOADS; FATIGUE OF MATERIALS; GYPSUM; STEEL; STRUCTURAL FRAMES;

SHEAR WALLS;

EID: 3042513380     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (16)

1. American Forest & Paper Association (AF&PA), 1995, Wood Frame Construction Manual for One- and Two- Family Dwellings - SBC High Wind Edition, AF&PA, Washington, D.C.
2. American Iron and Steel Institute (AISI), 1996, Builder's Steel Stud Guide, Publication RG-9607, AISI, Washington, D.C.
3. Building Seismic Safety Council (BSSC), 1997, NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, BSSC, Washington, D.C.
4. Heine, C. P., 1997, Effect of Overturning Restraint on the Performance of Fully Sheathed and Perforated Timber Framed Shear Walls, Thesis submitted in partial fulfillment of Master's of Science Degree in Civil Engineering. Virginia Polytechnic Institute and State University, Blacksburg, VA
5. International Code Council, 1998, International Building Code 2000, Final Draft, ICC, Falls Church, VA International Conference of Building Officials (ICBO), 1997, Uniform Building Code, ICBO, Whittier, CA
6. Johnson, A. C., 1997, Monotonic and Cyclic Performance of Full-Scale Timber Shear Walls with Openings, Thesis submitted in partial fulfillment of Master's of Science Degree in Civil Engineering. Virginia Polytechnic Institute and State University, Blacksburg, VA
7. Patton-Mallory, M., Gutkowski, R. M., and Soltis, L. A., 1984, Racking Performance of Light-Frame Walls Sheathed on Two Sides, Research paper FPL 448, USDA Forest Service, Forest Products Laboratory, Madison, WI
8. Rose, J. D. and E. L. Keith, 1996, Wood Structural Panel Shear Walls with Gypsum Wailboard and Window/Door Openings, APA Research Report 157, APA - The Engineered Wood Association, Tacoma, WA
9. Salenikovich, A. J., J. D. Dolan, and W. S. Easterling, 1999, Monotonie and Cyclic Tests of Long Steel-Frame Shear Walls with Openings. Virginia Polytechnic Institute and State University Timber Engineering Report TE-1999-001, Blacksburg, VA
10. Serrette, R., G. Hall, and J. Ngyen, 1996, Shear Wall Values for Light Weight Steel Framing, Light Gauge Steel Research Group, Report No. LGSRG-3-96, Santa Clara University, Santa Clara, CA.
11. Serrette, R., J. Encalada, G. Hall, B. Matchen, H. Nguyen, and A. Williams, 1997, Additional Shear Wall Values for Light Weight Steel Framing, Light Gauge Steel Research Group, Report No. LGSRG-1-97, Santa Clara University, Santa Clara, CA.
12. Standard Building Code, 1994 with 1996 Revisions, Southern Building Code Congress International, Birmingham, AL.
13. Structural Engineers Association of Southern California (SEAOSC), 1997, Standard Method of Cyclic (Reversed) Load Tests for Shear Resistance of Framed Walls for Buildings, SEAOSC, Whittier, CA
14. Sugiyama, H. and T. Matsumoto, 1993, A Simplified Method of Calculating the Shear Strength of a Plywood-Sheathed Wall with Openings II. Analysis of the Shear Resistance and Deformation of a Shear Wall with Openings, Mokuzai Gakkaishi, 39(8): 924-929
15. Sugiyama, H. and T. Matsumoto, 1994, Empirical Equations for the Estimation of Racking Strength of a Plywood-Sheathed Shear Wall with Openings. Transactions of the Architectural Institute of Japan
16. Yasumura, M. and H. Sugiyama, 1984, Shear properties of ply wood-sheathed wall panels with opening. Transactions of the Architectural Institute of Japan, 338(4), 88-98