A new scheme for speed-sensorless control of induction motor

IEEE Transactions on Industrial Electronics

Volumn 51, Issue 3, 2004, Pages 545-550

  Kwon, Young Ahn ^a   Kim, Sung Hwan ^b  

^a Pusan National University   (South Korea)

^b Korea Maritime University   (South Korea)

Author keywords

Current estimation; Indirect method of vector control; Induction motor; Speed sensorless control

Indexed keywords

ALGORITHMS; CONTROL SYSTEM SYNTHESIS; ESTIMATION; MATHEMATICAL MODELS; SPEED CONTROL; VECTORS; VOLTAGE CONTROL;

CURRENT ESTIMATION; SPEED SENSORLESS CONTROL; VECTOR CONTROL;

INDUCTION MOTORS;

EID: 2942677045     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2004.825370     Document Type: Article

References (40)

1. K. Rajashekara, A. Kawamura, and K. Matsuse, Sensorless Control of AC Motor Drives. New York: IEEE Press, 1996.
2. R. Joetten and G. Maeder, "Control methods for good dynamic performance induction motor drives based on current and voltage as measured quantities," IEEE Trans. Ind. Applicat., vol. 19, pp. 356-363, May/June 1983.
3. A. Fratta, A. Vagati, and F. Villata, "Vector control of induction motors without shaft transducers," in Proc. IEEE PESC'88, 1988, pp. 839-846.
4. T. Ohtani, N. Takada, and K. Tanaka, "Vector control of induction motor without shaft encoder," IEEE Trans. Ind. Applicat., vol. 28, pp. 157-165, Jan./Feb. 1992.
5. B. K. Bose, M. G. Simoes, D. R. Crecelius, K. Rajashekara, and R. Martin, "Speed sensorless hybrid vector controlled induction motor drive," in Conf. Rec. IEEE-IAS Annu. Meeting, 1995, pp. 137-143.
6. K. Ohyama and K. Shinohara, "Small-signal stability analysis of vector control system of induction motor without speed sensor using synchronous current regulator," IEEE Trans. Ind. Applicat., vol. 36, pp. 1169-1675, Nov./Dec. 2000.
7. Z. Beres and P. Vranka, "Sensorless IFOC of induction motor with current regulators in current reference frame," IEEE Trans. Ind. Applicat., vol. 37, pp. 1012-1018, July/Aug. 2001.
8. S. Tamai, H. Sugimoto, and M. Yano, "Speed sensorless vector control of induction motor with model reference adaptive system," in Conf. Rec. IEEE-IAS Annu. Meeting, 1987, pp. 189-195.
9. C. Schauder, "Adaptive speed identification for vector control of induction motors without rotational transducers," IEEE Trans. Ind. Applicat., vol. 28, pp. 1054-1061, Sept./Oct. 1992.
10. H. Tajima and Y. Hori, "Speed sensorless field-orientation control of the induction machine," IEEE Trans. Ind. Applicat., vol. 29, pp. 175-180, Jan./Feb. 1993.
11. F. Z. Peng and T. Fukao, "Robust speed identification for speed-sensorless vector control of induction motors," IEEE Trans. Ind. Applicat., vol. 30, pp. 1234-1240, Sept./Oct. 1994.
12. Y. A. Kwon and D. W. Jin, "A novel MRAS based speed sensorless control of induction motor," in Proc. IEEE IECON'99, 1999, pp. 933-938.
13. G. Griva, F. Profumo, R. Bojoi, V. Bostan, M. Cuius, and C. Ilas, "General adaptation law for MRAS high performance sensorless induction motor drives," in Proc. IEEE PESC'01, 2001, pp. 1197-1202.
14. V. Vasic and S. Vukosavic, "Robust MRAS-based algorithm for stator resistance and rotor speed identification," IEEE Power Eng. Rev., vol. 21, no. 11, pp. 39-41, 2001.
15. H. Kubota, K. Mtsuse, and T. Nakano, "DSP-based speed adaptive flux observer of induction motor," IEEE Trans. Ind. Applicat., vol. 29, pp. 344-348, Mar./Apr. 1993.
16. P. L. Jansen, R. D. Lorentz, and D. W. Novotny, "Observer-based direct field orientation: Analysis and comparison of alternative methods," IEEE Trans. Ind. Applicat., vol. 30, pp. 945-953, July/Aug. 1994.
17. J. Holtz, "State of the art of controlled AC drives without speed sensors," Int. J. Electron., vol. 80, no. 2, pp. 249-263, 1996.
18. M. Elbuluk, N. Lagovsky, and M. D. Kankam, "Design and implementation of a closed-loop observer and adaptive controller of induction motor drives," IEEE Trans. Ind. Applicat., vol. 34, pp. 435-443, May/June 1998.
19. C. M. Ritter and J. L. Silvino, "An alternative sensorless field orientation method," IEEE Trans. Energy Conversion, vol. 14, pp. 1335-1340, Dec. 1999.
20. G. Henneberger, B. J. Brunsbach, and T. Klepsch, "Field oriented control of synchronous and asynchronous drives without mechanical sensors using a Kalman filter," in Proc. EPE, 1991, pp. 664-671.
21. Y. R. Kim, S. K. Sul, and M. H. Park, "Speed sensorless vector control of an induction motor using an extended Kalman filter," in Conf. Rec. IEEE-IAS Annu. Meeting, 1992, pp. 594-599.
22. G. G.G. Garcia Soto, E. Mendes, and A. Razek, "Reduced-order observers for rotor flux, rotor resistance and speed estimation for vector controlled induction motor drives using the extended Kalman filter technique," Proc. IEE - Elect. Power Applicat., vol. 146, no. 3, pp. 282-288, 1999.
23. L. Salvatore, S. Stasi, and F. Cupertino, "Improved rotor speed estimation using two Kalman filter-based algorithms," in Conf. Rec. IEEE-IAS Annu. Meeting, 2001, pp. 125-132.
24. M. Ishida and K. Iwata, "A New slip frequency detector of an induction motor utilizing rotor slot harmonics," IEEE Trans. Ind. Applicat., vol. 20, pp. 575-581, May/June 1984.
25. F. Profumo, G. Griva, M. Pastorelli, and J. C. Moreira, "Universal field oriented controller based on air gap flux sensing via third harmonic stator voltage," IEEE Trans. Ind. Applicat., vol. 30, pp. 448-455, Mar./Apr. 1994.
26. K. D. Hurst and T. G. Habetler, "A comparison of spectrum estimation techniques for sensorless speed detection in induction machine," IEEE Trans. Ind. Applicat., vol. 33, pp. 898-905, July/Aug. 1997.
27. T. M. Wolbank and B. Haidvogl, "Evaluation of the influence of design and operation of standard induction motors on sensorless control schemes utilising saliencies in the transient electrical behavior," in Proc. IEEE PESC'00, 2000, pp. 903-908.
28. J. I. Ha, M. Ohto, J. H. Jang, and S. K. Sul, "Design and selection of AC machines for saliency-based sensorless control," in Conf. Rec. IEEE-IAS Annu. Meeting, 2002, pp. 1155-1162.
29. F. Parasiliti, R. Petrella, and M. Tursini, "Adaptive sliding mode observer for speed sensorless control of induction motors," in Conf. Rec. IEEE-IAS Annu. Meeting, 1999, pp. 2277-2283.
30. Y. Zhang, C. Jin, and V. Utkin, "Sensorless sliding-mode control of induction motors," IEEE Trans. Ind. Electron., vol. 47, pp. 1286-1297, Dec. 2000.
31. A. Derdiyok, M. K. Guven, H. Rehman, N. Inanc, and L. Xu, "Design and implementation of a new sliding-mode observer for speed-sensorless control of induction machine," IEEE Trans. Ind. Electron., vol. 49, pp. 1177-1182, Oct. 2002.
32. P. Vas, Artificial-Intelligence-Based Electrical Machines and Drives. London, U.K.: Oxford Univ. Press, 1999.
33. R. M. Bharadwaj, A. G. Parlos, and H. A. Toliyat, "Adaptive neural network-based state filter for induction motor speed estimation," in Proc. IEEE IECON'99, 1999, pp. 1283-1288.
34. E. Leksono, R. Prihatin, and K. Kadiman, "Fuzzy auto reset controller for speed sensorless induction motor drive," in Proc. IEEE IECON'00, 2000, pp. 2321-2326.
35. J. Campbell and M. Summer, "Practical sensorless induction motor drive employing an artificial neural network for online parameter adaptation," Proc. IEE - Elect. Power Applicat., vol. 149, no. 4, pp. 255-260, 2002.
36. P. Vas, Sensorless Vector and Direct Torque Control of AC Machine. London, U.K.: Oxford Univ. Press, 1998.
37. J. R. G. Schofield, "Variable speed drives using induction motors and direct torque control," in IEE Colloq. Vector Control Revisited, 1998, pp. 5/1-5/7.
38. J. Maes and J. Melkebeek, "Speed sensorless direct torque control of induction motors using an adaptive flux observer," in Conf. Rec. IEEE-IAS Annu. Meeting, 1999, pp. 2305-2312.
39. C. Lascu, I. Boldea, and F. Blaabjerg, "A modified direct torque control for induction motor sensorless drive," IEEE Trans. Ind. Electron., vol. 36, pp. 122-130, Feb. 2000.
40. J. E. Slotine and W. Li, Applied Nonlinear Control. Englewood Cliffs, NJ: Prentice-Hall, 1991.