Effect of high volume fly ash on mechanical properties of fiber reinforced concrete

Materials and Structures/Materiaux et Constructions

Volumn 37, Issue 269, 2004, Pages 318-327

  Kayali, O ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

AGGREGATES; COMPRESSIVE STRENGTH; DENSIFICATION; FLY ASH; MECHANICAL ENGINEERING; MICROSTRUCTURE; POLYPROPYLENES; SILICA; STRAIN; TENSILE STRENGTH; TOUGHNESS;

AGGREGATE-PASTE INTERFACE; MICROSTRUCTURAL MODIFICATIONS; TENSILE STRAIN; TRANSITION ZONES;

REINFORCED CONCRETE;

EID: 2942648334     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/13978     Document Type: Article

References (43)

1. Ramachandran, V.S., Feldman, R.F. and Beaudoin, J.J., 'Concrete Science' (Heyden and Son Ltd, London, 1981).
2. Shah, S.P., 'Do fibers increase the tensile strength of cement based matrixes?', ACI Materials Journal 88 (6) (1991) 595-602.
3. Carr, K., 'Polypropylene and steel fiber combinations', Concrete (London) 34 (8) (2000) 48-50.
4. Carr, K., 'Making good concrete better', Concrete (London) 32 (10) (1998) 16-17.
5. Alhozaimy, A.M., Soroushian, P. and Mirza, F., 'Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials', Cement and Concrete Composites 18 (2) (1996) 85-92.
6. Swamy, R.N. and Mangat, P.S., 'Onset of cracking and ductility of steel fiber concrete', Cement and Concrete Research 5(1) (1975) 37-53.
7. Nataraja, M.C., Dhang, A.P. and Gupta, A.P., 'Stress-strain curves for steel-fiber reinforced concrete under compression', Cement and Concrete Composites 21 (5-6) (1999) 383-390.
8. Balendran, R.V., Zhou, P.P., Nadeem, A. and Leung, Y.T. 'Influence of steel fibers on strength and ductility of normal and lightweight high strength concrete', Building and Environmental 37 (12) (2002) 1361-1367.
9. Langley, W.S., Carette, G.G. and Malhotra, V.M., 'Structural concrete incorporating high volumes of ASTM Class F fly ash', ACI Materials Journal 86 (5) (1989) 507-514.
10. Poon, C.S., Lam, L. and Wong, Y.L., 'Study on high strength concrete prepared with large volumes of low calcium fly ash', Cement and Concrete Research 30 (3) (2000) 447-455.
11. Malhotra, V.M., 'CANMET investigations dealing with high-volume fly ash concrete', In: 'Advances in Concrete Technology' (Malhotra, V.M., ed., 1994) 445-482, CANMET, Ottawa, Canada.
12. Mehta, P.K., 'Advancements in concrete technology', Concrete International 21 (6) (1999) 69-76.
13. Ravina, D., 'Mechanical properties of structural concrete incorporating a high volume of class F fly ash as partial fine sand replacement', Mater. Struct. 31 (3) (1998) 84-90.
14. Halse, Y., Pratt, P.L., Dalziel, J.A. and Gutteridge, W.A., 'Development of microstructure and other properties in fly ash OPC systems', Cement & Concrete Research 14 (4) (1984) 491-498.
15. Jun-Yuan, H., Scheetz, B.E. and Roy, D.R., 'Hydration of fly ash - Portland cements', Cement & Concrete Research 14 (4) (1984) 505-512.
16. Chan, Y.-W. and Li, V.C., 'Effects of transition zone densification on fiber/cement paste bond strength improvement', Advanced Cement Based Materials 5 (1) (1997) 8-17.
17. Bentur, A., Diamond, S. and Mindess, S., 'Microstructure of the steel fibre-cement interface', Journal of Materials Science 20 (10) (1985) 3610-3620.
18. Stucke, M.S. and Majumdar, A.J, 'Microstructure of glass fibre-reinforced cement composites', J. Mater. Sci. 11 (6) (1976) 1019-1030.
19. Wei, S., Mandel, J.A. and Said, S., 'Study of the interface strength in steel fiber-reinforced cement-based composites', ACI Journal 83 (4) (1986) 597-605.
20. Al-Khalaf, M.N., Page, C.L. and Ritchie, A.G.B., 'Effects of fibre surface composition on mechanical properties of steel fibre reinforced mortars', Cement & Concrete Research 10 (1) (1980) 71-77.
21. Al-Khalaf, M.N. and Page, C.L., 'Steel/mortar interface: microstructural features and mode of failure', Cement and Concrete Research 9 (2) (1979) 197-207.
22. ASTM Annual Book of ASTM Standards, Section 4, V. 4.02, Concrete and AggregatesVolume 4.02), ASTM, Philadelphia, (1993) USA.
23. Mor, A., 'Steel-concrete bond in high-strength lightweight concrete', ACI Materials Journal 89 (1) (1992) 76-82.
24. Gao J, Sun W and K., M., 'Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete', Cement & Concrete Composites 19 (4) (1997) 307-313.
25. Mehta, P.K. and Gjørv, O.E., 'Properties of portland cement concrete containing fly ash and condensed silica fume', Cement and Concrete Research 12 (5) (1982) 587-595.
26. Ozyildirim, C. and Halstead, W.J., 'Improved concrete quality with combination of fly ash and silica fume', ACI Materials Journal 91 (6) (1994) 587-594.
27. Mitsui, K., Li, Z., Lange, D.A. and Shah, S.P., 'Relationship between microstructure and mechanical properties of the paste-aggregate interface', ACI Materials Journal 91 (1) (1994) 30-39.
28. Balaguru, P. and Dispia, M.G., 'Properties of fiber reinforced high-strength semilightweight concrete', ACI Materials Journal 90 (5) (1993) 399-405.
29. Wiens, U., Breit, W. and Schiessl, P., 'Influence of high silica fume and high fly ash contents on alkalinity of pore solution and protection of steel against corrosion', In: 'Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete', ACI SP-153, (Malhotra, V.M., ed., 1995) 741-761, American Concrete Institute, Milwaukee, Wisconsin, USA.
30. Sellevold, E.J., Bager, D.H., Klitgaard Jensen, E. and Knudsen, T., 'Silica fume - cement pastes; hydration and pore structure', The Norwegian Institute of Technology, NTH, Division of Building Materials, Trondheim, Norway (1982) 19-50.
31. Zhang, M.H. and Gjørv, O.E., 'Effect of silica fume on cement hydration in low porosity cement pastes', Cement & Concrete Research 21 (5) (1991) 800-808.
32. Page, C.L., 'Mechanism of corrosion protection in reinforced concrete marine structures', Nature 258 (5535) (1975) 514-515.
33. Kayyali, O.A., 'Effects of Freezing and Thawing on the Microstructure and Strength of Portland Cement Paste', PhD Thesis, Department of Civil Engineering, Strathclyde, Glasgow (1977) 223p.
34. Monteiro, P.J.M., Gjørv, O.E. and Mehta, P.K., 'Microstructure of the steel - cement paste interface in the presence of chloride', Cement & Concrete Research 15 (5) (1985) 781-784.
35. Yue, L. and Shuguang, H., 'The microstructure of the interfacial transition zone between steel and cement paste', Cement & Concrete Research 31 (3) (2001) 385-388.
36. Goldman, A. and Bentur, A. 'Bond effects on high-strength silica -fume concretes', ACI Materials Journal 86 (5) (1989) 440-447.
37. Gjørv, O.E., Monteiro, P.J.M. and Mehta, P.K., 'Effect of condensed silica fume on the steel - concrete bond', ACI Materials Journal 87 (6) (1990) 573-580.
38. Khayat, K.H. and Hester, W.T., 'Evaluation of concrete mixtures for underwater pile repairs', Cement, Concrete and Aggregates 13(1) (1991) 32-41.
39. Kuroda, M., Watanabe, T. and Terashi, N., 'Increase of bond strength at interfacial transition zone by the use of fly ash', Cement and Concrete Research 30 (2) (2000) 253-258.
40. Jiang, L., 'The interfacial zone and bond strength between aggregates and cement pastes incorporating high volumes of fly ash', Cement and Concrete Composites 21 (4) (1999) 313-316.
41. Sandvik, M. and Gjørv, O.E., 'Effect of condensed silica fume on the strength development of concrete', in 'Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete', Publication SP - 91, American Concrete Institute Vol. 2, (1986) 893-901.
42. Monteiro, P.J.M., Gjørv, O.E. and Mehta, P.K., 'Effect of condensed silica fume on the steel-cement paste transition zone', Cement and Concrete Research 19 (1) (1989) 114-123.
43. Eren, O. and Çelik, T., 'Effect of silica fume and steel fibers on some properties of high strength concrete', Construction and Building Materials 11 (7-8) (1997) 373-382.