Fabrication and engineering technology for lightweight ship structures, Part 1: Distortions and residual stresses in panel fabrication

Journal of Ship Production

Volumn 20, Issue 1, 2004, Pages 43-59

  Huang, T D ^a   Dong, Pingsha ^b   DeCan, Larry ^c   Harwig, Dennis ^d   Kumar, Ramesh ^e  

^a NORTHROP GRUMMAN CORPORATION   (United States)

^b BATTELLE MEMORIAL INSTITUTE   (United States)

^c UNIVERSITY OF NEW ORLEANS   (United States)

^d EDISON WELDING INSTITUTE   (United States)

^e Dimensional Control Systems Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUCKLING; COST EFFECTIVENESS; ELECTRIC DISTORTION; FABRICATION; HYDRODYNAMICS; MATERIALS HANDLING; OPTICAL RADAR; PARAMETER ESTIMATION; RESIDUAL STRESSES;

BUCKLING DISTORTION; COMMERCIAL VESSELS; PANEL FABRICATION; SHIPBOARDS;

SHIPBUILDING;

EID: 2942566685     PISSN: 87561417     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (35)

1. BARBER, T. E., BRUST, F. W., MISHLER, H. W., AND KANNINEN, M. F. 1981 Controlling Residual Stresses by Heat Sink Welding, EPRI Report NP-2159-LD, December.
2. BENDER SHIPBUILDING AND REPAIR. 2002 Plate Residual Stress Modeling and Cutting Accuracy Optimization, Project Report (Phase 1) to GCRMTC, New Orleans, LA, July.
3. DONG, P. 2000 Modeling of weld residual stresses and distortions: advanced computational procedures and practical applications, keynote lecture, Proceedings, 6th International Conference on Residual Stresses, July 10-12, Oxford, UK, 1223-1335.
4. DONG, P. 2001 Residual stress analyses of a multi-pass girth weld: 3D special shell versus axisymmetric models. ASME Transaction, Journal of Pressure Vessel Technology, 123, 2, 207-213.
5. DONG, P. 2002 Residual stresses and distortions in welded structures: what we know today and beyond, keynote lecture, Proceedings, 6th International Conference on Trends in Welding Research, Pine Mountain, GA, April 15-19, 815-825.
6. DONG, P., HONG, J. K., AND ROGERS, P. 1998 Analysis of residual stresses in Al-Li repair welds and mitigation techniques, Welding Journal, 77, 11, 439s-445s.
7. DULL, R. M., DYDO, J. R., AND RUSSELL, J. J. 2001 Transient thermal tensioning for control of buckling distortion, Proceedings, 82nd Annual AWS Convention, May, Cleveland, OH, 95-96.
8. DYDO, J. R., CHEN, Y., AND CHENG, W. 1998 Development and experimental verification of angular distortion models in welded thin panels. Defense Manufacturing Conference, December, New Orleans, LA.
9. DYDO, J. R., AND CHENG, W. 1999 Finite element modeling of angular distortion in stiffened thin-section panels, Proceedings, 9th International Conference on Computer Technology in Welding, September, Detroit, MI.
10. GREENE, T. W., AND HOLZBAUR, A. A. 1946 Controlled low-temperature stress relieving, Welding Journal Research Supplement, 11, 3, 171s-185s.
11. GUAN, Q., ZHANG, C. X., AND GUO, D. L. 1994 Dynamic control of welding distortion by moving spot heat sink, Welding in the World, 33, 4, 308-312.
12. HARWIG, D. D. 1996 Weld parameter development for robot welding, SME Technical Paper RP96-291, Proceedings, SME Manufacturing 96 Conference. Chicago, IL, September, 19-40.
13. HARWIG, D. D. 1997 The ARCWISE™ Technique for Increasing Productivity in Arc Welding, Proceedings, International Conference on Advances in Welding Technology: High Productivity Joining Processes, September, Columbus, OH, 17-19.
14. HARWIG, D. 2000 A wise method for assessing arc welding performance and quality, Welding Journal, 79, 12, 35-40.
15. HARWIG, D. D., ZHENG, B., REICHERT, C., AND HUANG, T. 2003 Semi-adaptive synergic-fill welding tractor for ship unit erection. Proceedings, ShipTech 2003, January 16-17, Biloxi, MS.
16. HUANG, T. D. 1995 SafeHull Analysis of American Heavy lift Double Hull Product Tanker, Technical Report DS-AHL-001, Northrop Grumman Ship Systems, Avondale Operations, New Orleans, LA, June.
17. HUANG, T. D., DECAN, L., HARWIG, D., DONG, P., AND KUMAR, R. 2002 Plate process improvements at Northrop Grumman Avondale Shipbuilding, Proceedings, NSRP 2002 Automation in Shipbuilding Conference, December 11-13, New Orleans, LA.
18. HUANG, T. D., DONG, P., DECAN, L., AND HARWIG, D. 2003 Residual stresses and distortions in lightweight ship panel structures, Northrop Grumman Technology Review Journal, 11, 1, 1-26.
19. HUANG, T. D., AND NIOLET, D. F. 1997 SafeHull Analysis of ARCO 125,000 DWT Crude Carrier, Technical Report SD97-01-09, Northrop Grumman Ship Systems, Avondale Operations, New Orleans, LA, November.
20. MASUBUCHI, K. 1970 Control of distortion and shrinkage in welding, Welding Research Council Bulletin, 149, April.
21. McGUIRE, P. A., AND GROOM, J. J. 1979 Computational Analysis and Experimental Evaluation for Residual Stresses From Induction Heating, Final Report to EPRI (RP1394-4), Battelle Memorial Institute, December 28.
22. MICHALERIS, P., AND DEBICCARI, A. 1996 Predictive technique for buckling analysis of thin section panels due to welding, JOURNAL OF SHIP PRODUCTION, 12, 4, 269-275.
23. MICHALERIS, P., AND DEBICCARI, A. 1997 Prediction of welding distortion, Welding Journal, 76, 4, 172s-181s.
24. MICHALERIS, P., AND SUN, X. 1997 Finite element analysis of thermal tensioning techniques mitigating weld buckling distortion, Welding Journal, 76, 11, 451s-457s.
25. OKUMOTO, Y., AND MATSUZAKI, S. 1997 Approach to accurate production of hull structures, JOURNAL OF SHIP PRODUCTION, 13, 3, 207-214.
26. SHANGVI, J. Y., AND DYDO, J. R. 2002 A transient thermal tensioning process for mitigating distortion in stiffened structures, Proceedings, Society of Engineering Science 39th Technical Meeting, October, State College, PA.
27. SHANGHVI, J., AND MICHALERIS, P. 2002 Thermo-elasto-plastic finite element analysis of quasi-state processes in Eulerian reference frames, International Journal for Numerical Methods in Engineering, 53, 7, 1533-1556.
28. SPICKNALL, M. H, AND KUMAR, R. 1999 Evaluation of software tools used to analyze the impact of dimensional variation on complex assembled products and to optimize tolerances during product design, JOURNAL OF SHIP PRODUCTION, 15, 3, 146-155.
29. SPICKNALL, M. H, AND KUMAR, R. 2002 A dimensional engineering process for shipbuilding, JOURNAL OF SHIP PRODUCTION, 18, 2, 105-115.
30. STORCH, R. L., AND ANUTARASOTI, S. 1997 Use of variation merging equations to aid implementation of accuracy control, paper presented at SNAME Ship Production Symposium, April 21-23, New Orleans, LA, NSRP-0532.
31. TIMOSHENKO, S. P., AND GERE, J. M. 1961 Theory of Elastic Stability, 2nd ed., McGraw-Hill, New York, 348-439.
32. YANG, Y. P., CHEN, L., DONG, P., AND CAO, Z. 2002 Finite element and experimental study of thermal cutting induced distortion in a production environment, in Alluri, S.N., and Pepper, D.W., editors, Advances in Computational Engineering and Sciences, Tech Science Press, Forsyth, GA, 1075-1082.
33. YANG, Y. P., DONG, P., BRUST, F. W., ZHANG, J., AND CAO, Z. 2000 Numerical prediction of welding-induced buckling distortion and buckling mechanisms, Proceedings, International Conference on Advances in Computational Engineering and Sciences, vol. 2, August, 1906-1912.
34. YANG, Y. P., DONG, P., TIAN, X., ZHANG, Z. 1998 Prevention of hot cracking of high strength aluminum alloy by mechanical rolling, Proceedings, 5th International Conference on Trends in Welding Research, June 1-5, Pine Mountain, GA, 700-705.
35. YANG, Y. P., DONG, P., ZHANG, J., AND TIAN, X. 2000 A hot cracking mitigation technique for TIG welding of high strength aluminum alloys, Welding Journal Research Supplement, 79, 1, 9s-17s.