Microstructure and deformation behaviour of iron-rich iron-aluminium alloys with ternary carbon and silicon additions

Steel Research International

Volumn 75, Issue 5, 2004, Pages 343-352

  Herrmann, Jutta ^a   Inden, Gerhard ^b   Sauthoff, Gerhard ^b  

^a Sulzer Ltd   (Switzerland)

^b MAX PLANCK INSTITUT FÜR EISENFORSCHUNG GMBH   (Germany)

Author keywords

Carbide precipitation; Hardening; Iron aluminium carbon alloys; Portevin Le Chatelier effect; Yield phenomena

Indexed keywords

BINARY ALLOYS; CARBON; DEFORMATION; DOPING (ADDITIVES); MICROSTRUCTURE; PRECIPITATION (CHEMICAL); SILICON; TERNARY SYSTEMS; ALUMINUM ALLOYS; BRITTLENESS; CARBIDES; DUCTILITY; FRACTURE TOUGHNESS; HARDENING; HEAT TREATMENT; SUPERCONDUCTING TRANSITION TEMPERATURE; YIELD STRESS;

CARBIDE PRECIPITATIONS; FRACTURE STRAIN; MONOCRYSTALS;

IRON ALLOYS;

CARBIDE PRECIPITATION; IRON-ALUMINIUM-CARBON ALLOYS; PORTEVIN-LE CHATELIER EFFECTS; YIELD PHENOMENA;

EID: 2942550784     PISSN: 16113683     EISSN: None     Source Type: Journal    
DOI: 10.1002/srin.200405965     Document Type: Article

References (47)

1. E.J. Drewes, B. Engl, H. Hofmann, J. Kruse, M. Menne, C.-P. Reip, G. Frommeyer, J. Herrmann, G. Inden, S. Klaus, G. Sauthoff, M. Wildau, M. Dannenfeldt, M. Stratmann: Höherfester Leichtbauwerkstoff auf der Basis von Eisen-Aluminium-Legierungen (Abschlussbericht BMBF 03 N 3013), (2000), 1.
2. E.J. Drewes, G. Frommeyer, M.Stratmann: Höherfester Leichtbauwerkstoff auf Basis von Eisen-Aluminium-Legierungen, MaTech - Neue Materialien für Schlüsseltechnologien des 21. Jahrhunderts: Jahresbericht 1999/2000, 2000, BMBF, Bonn, p. 03 N 3013.
3. J. Herrmann, G. Inden, G. Sauthoff, W. Schweika: Intermetallics, (2004), in preparation.
4. J. Herrmann, G. Inden, G. Sauthoff: Acta Mater., 51 (2003), 2847.
5. J. Herrmann, G. Inden, G. Sauthoff: Acta Mater., 51 (2003), 3233.
6. M. Palm and G. Inden: Intermetallics, 3 (1995), 443
7. M. Palm and G. Inden: Constitution of Ternary Aluminide Systems as Basis for Materials Development, Structural Intermetallics 1997 (Proc. ISSI-2), 1997, TMS, Warrendale, p. 73.
8. L.J. Huetter and H.H. Stadelmaier: Acta Metall., 6 (1958), 367.
9. H.J. Goldschmidt: J. Inst. Met., 97 (1969), 173.
10. H. Nowotny: Angew. Chem., 84 (1972), 973.
11. I. Jung and G. Sauthoff: Z. Metallk., 80 (1989), 490.
12. W. Sanders and G. Sauthoff: Intermetallics, 5 (1997), 361.
13. W. Sanders and G. Sauthoff: Intermetallics, 5 (1997), 377.
14. R.G. Baligidad, U. Prakash and A. Radha Krishna: Materials Science and Engineering A, 265 (1999), 301.
15. R.G. Baligidad and A. Radhakrishna: Mater. Sci. Eng. A-Struct. Mater., 308 (2001), 136.
16. U. Prakash, R.A. Buckley, H. Jones, C.M. Sellars: ISIJ int., 31 (1991), 1113.
17. R.G. Baligidad, A. Radhakrishna, U. Prakash: Materials Science and Engineering A, 257 (1998), 235.
18. R.G. Baligidad and A. Datta: Mater. Sci. Eng. A-Struct. Mater., 301 (2001), 162.
19. U. Prakash and G. Sauthoff: Scripta Mater., 44 (2001), 73.
20. S.M. Zhu, X.S. Guan, K. Shibata and K. Iwasaki: Materials Transactions, 43 (2002), 36.
21. L. Pang and K.S. Kumar: Acta Mater., 46 (1998), 4017.
22. C. Garcia Oca, D.G. Morris and M.A. Munoz-Morris: Scripta Mater., 44 (2001), 561.
23. A. Radhakrishna, R.G. Baligidad, D.S. Sarma: Scripta Mater., 45 (2001), 1077.
24. L. Pang, S.M. Han, K.S. Kumar: Acta Mater., 50 (2002), 3623.
25. S.C. Deevi, V.K. Sikka, C.T. Liu: Prog. Mater. Sci., 42 (1997), 177.
26. P.J. Maziasz, G.M. Goodwin, D.J. Alexander and S. Viswanathan: Alloy Development and Processing Effects for FeAl Iron Aluminides: An Overview, International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications, 1997, ASM Interntl., Materials Park, p. 157.
27. Y.V.R.K. Prasad, D.H. Sastry, R.S. Sundar and S.C. Deevi: Optimization of Hot Workability and Hot Deformation Mechanisms in FeAl and Fe3Al Based Alloys, Structural Intermetallics 2001 (Proc. ISSI-3), 2001, TMS, Warrendale, p. 233.
28. J. Herrmann, G. Inden, G. Sauthoff: Steel Research Int., 75 (2004), No. 5, 339.
29. M. Palm, Dr. rer. nat. thesis, Universität Dortmund(1990).
30. W. Pitsch and G. Sauthoff: Microstructure of Steels, Steel, Vol. 1, 1992, Springer Verlag, Berlin, p. 1.
31. J. Peterseim and G. Sauthoff: Steel Research, 56 (1985), 483.
32. J.L. Bonnentien and J. Bigot: Mater. Trans. JIM, 41 (2000), 78.
33. Ternary Alloys: a Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, VCH, Weinheim, (1994).
34. V. Raghavan: J. Phase Equilib., 23 (2002), 362.
35. L.S. Darken: Transactions of the American Institute of Mining and Metallurgical Engineers 180 (1949), 430.
36. J. Miettinen: Calphad 22 (1998), 231.
37. K.A. Taylor: Scr. Metall. Mater., 32 (1995), 7.
38. L. Falat, G. Sauthoff and A. Schneider: Fe-Al-C-M ThermoCalc calculations (2002), unpublished work.
39. A.J. Craven, K. He, L.A.J. Garvie and T.N. Baker: Acta Mater., 48 (2000), 3857.
40. J. Herrmann: Untersuchungen zur Struktur und zum mechanischen Verhalten von Fe-reichen Fe-Al-Legierungen, VDI Verlag, Düsseldorf, (2000), 1.
41. P. Rodriguez; Bull. Mater. Sci., 6 (1984), 653.
42. E. Pink and S. Kumar: Mater. Sci. Eng. A-Struct. Mater., 201 (1995), 58.
43. K. Tanaka: J. Phys. Soc. Jpn. 30 (1971), 404.
44. I.S. Golovin, M.S. Blanter, T.V. Pozdova, K. Tanaka and L.B. Magalas: Phys. Status Solidi A, 168 (1998), 403.
45. A. Nagy, U. Harms, F. Klose, H. Neuhäuser: Mater. Sci. Eng. A-Struct Mater., 324 (2002), 68.
46. P. Hähner: Acta Mater., 45 (1997), 3695.
47. J. Balik, P. Lukac, L.P. Kubin: Scripta Mater., 42 (2000), 465.