An engineering tool for the quantitative prediction of general roughness deformation in EHL contacts based on harmonic waviness attenuation

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 219, Issue 5, 2005, Pages 303-312

  Venner, C H ^a   Lubrecht, A A ^b  

^a UNIVERSITY OF TWENTE   (Netherlands)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

Elastohydrodynamic lubrication; Elliptical contact; Line contact; Point contact; Roughness deformation; Surface roughness

Indexed keywords

APPROXIMATION THEORY; CONTACTS (FLUID MECHANICS); DEFORMATION; SURFACE ROUGHNESS;

ELLIPTICAL CONTACT; LINE CONTACT; POINT CONTACT; ROUGHNESS DEFORMATION;

ELASTOHYDRODYNAMIC LUBRICATION;

CONTACT; ELASTOHYDRODYNAMIC LUBRICATION; SURFACE ROUGHNESS; TOOL; TRIBOLOGY;

EID: 29344461511     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/135065005X33973     Document Type: Review

References (46)

1. Wedeven, L. D. and Cusano, C. Elastohydrodynamic film thickness measurements of artificially produced surface dents and grooves. ASLE Trans., 1979, 22, 369-381.
2. Kaneta, M. and Cameron, A. Effects of asperities in elastohydrodynamic lubrication. ASME JOLT, 1980, 102, 374-379.
3. Kaneta, M., Sakai, T., and Nishikawa, H. Optical interferometric observations of the effects of a bump on point contact EHL. ASME J. Tribol., 1992, 114, 779-784.
4. Kaneta, M., Sakai, T., and Nishikawa, H. Effects of surface roughness on point contact EHL. STLE Trib. Trans., 1993, 36(4), 605-612.
5. Kaneta, M., Nishikawa, H., Kanada, T., and Matsuda, K. Abnormal phenomena appearing in EHL contacts. ASME J. Tribol., 1996, 118, 886-892.
6. Goglia, P. R., Cusano, C., and Conry, T. F. The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts. Part I - single irregularities. ASME J. Tribol., 1984, 106, 104-112.
7. Goglia, P. R., Cusano, C., and Conry, T. F. The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts. Part II - wavy surfaces. ASME J. Tribol., 1984, 106, 113-119.
8. Kweh, C. C., Evans, H. P., and Snidle, R. W. Micro-elastohydrodynamic lubrication of an elliptical contact with transverse and three-dimensional roughness. ASME J. Tribol., 1989, 111, 577-583.
9. Lee, R. T. and Hamrock, B. J. A circular non-Newtonian fluid model: part II - used in micro-elastohydrodynamic lubrication. ASME J. Tribol., 1990, 112, 497-505.
10. Ai, X., Cheng, H. S., and Zheng, L. A transient model for micro-elastohydrodynamic lubrication with three-dimensional irregularities. ASME J. Tribol., 1993, 115, 102-110.
11. Ai, X. and Cheng, H. S. The influence of moving dent on point EHL contacts. STLE Trib. Trans., 1994, 37, 323-335.
12. Ai, X. and Cheng, H. S. A transient EHL analysis for line contacts with a measured surface roughness using multigrid technique. ASME J. Tribol., 1994, 116, 549-558.
13. Ai, X. and Cheng, H. S. The effects of surface texture on EHL point contacts. ASME J. Tribol., 1996, 118, 59-66.
14. Chang, L., Cusano, C., and Conry, T. F. Effects of lubrication rheology and kinematic conditions on microelastohydrodynamic lubrication. ASME J. Tribol., 1989, 111, 344-351.
15. Chang, L. Traction in thermal elastohydrodynamic lubrication of rough surfaces. ASME J. Tribol., 1992, 114, 186-191.
16. Lubrecht, A. A., Venner, C. H., Lane, S., Jacobson, B., and Ioannides, E. Surface damage - comparison of theoretical and experimental endurance lives of rolling bearings. In Proceedings of the 1990 Japan International Tribology Conference, Nagoya, Japan, 1990, Vol. 1, pp. 185-190.
17. Lubrecht, A. A. and Venner, C. H. Aspects of two-sided surface waviness in an EHL line contact. Proceedings of the 1992 Leeds-Lyon Symposium on Tribology, Leeds, 1992, pp. 205-214.
18. Osborn, K. F. and Sadeghi, F. Time dependent line EHD lubrication using the multigrid/multilevel technique. ASME J. Tribol., 1992, 114, 68-74.
19. Venner, C. H., Lubrecht, A. A., and ten Napel, W. E. Numerical simulation of the overrolling of a surface feature in an EHL line contact. ASME J. Tribol, 1991, 113, 777-783.
20. Venner, C. H. and Lubrecht, A. A. Transient analysis of surface features in an EHL line contact in the case of sliding. ASME J. Tribol., 1994, 116, 186-193.
21. Venner, C. H. and Lubrecht, A. A. Numerical simulation of a transverse ridge in a circular EHL contact, under rolling/sliding. ASME J. Tribol., 1994, 116, 751-761.
22. Venner, C. H. and Lubrecht, A. A. Numerical simulation of waviness in a circular EHL contact, under rolling/sliding. Proceedings of the 1994 Leeds-Lyon Symposium on Tribology, Leeds, 1994, pp. 259-272.
23. Venner, C. H. and Lubrecht, A. A. Numerical analysis of the influence of waviness on the film thickness of a circular EHL contact. ASME J. Tribol., 1996, 118, 153-161.
24. Lubrecht, A. A. The numerical solution of the EHL line-and point contact problem using multigrid techniques. PhD Thesis, Twente University, The Netherlands, 1987.
25. Venner, C. H. and Lubrecht, A. A. Multilevel methods in lubrication. Elsevier Tribology Series (Ed. D. Dowson), 2000, Vol. 37 (ISBN 0-444-50503-2).
26. Venner, C. H. Multilevel solution of the EHL line and point contact problems. PhD Thesis, Twente University, The Netherlands, 1991.
27. Greenwood, J. A. and Johnson, K. L. The behaviour of transverse roughness in sliding elastohydrodynamically lubricated contacts. Wear, 1992, 153, 107-117.
28. Greenwood, J. A. and Morales-Espejel, G. E. The behaviour of transverse roughness in EHL contacts. Proc. Instn Mech. Engrs, 1994, 208, 121-132.
29. Morales-Espejel, G. E. Elastohydrodynamic lubrication of smooth and rough surfaces. PhD Thesis, University of Cambridge, Department of Engineering, 1993.
30. Couhier, F. Influence des rugosites de surface sur les mecanismes de lubrification de contact elastohydrodynamique cylindre-plan (in French). PhD Thesis, INSA de Lyon, France, 1996.
31. Venner, C. H., Couhier, F., Lubrecht, A. A., and Greenwood, J. A. Amplitude reduction of waviness in transient EHL line contacts. Proceedings of the 1996 Leeds-Lyon Symposium on Tribology, Leeds, 1996, pp. 103-112.
32. Greenwood, J. A. and Morales-Espejel, G. E. The amplitude of the complementary function for wavy EHL contacts. Proceedings of the 1996 Leeds-Lyon Symposium on Tribology, Leeds, 1996, pp. 307-312.
33. Hooke, C. J. Surface roughness modification in elastohydrodynamic line contacts operating in the elastic, piezoviscous regime. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1998, 212, 145-162.
34. Hooke, C. J. Surface roughness modification in EHL line contacts - the effect of roughness wavelength, orientation and operating conditions. Proceedings of the 1998 Leeds-Lyon Symposium on Tribology, Lyon, 1998, pp. 193-202.
35. Lubrecht, A. A., Graille, A., Venner, C. H., and Greenwood, J. A. Waviness amplitude reduction in EHL line contact under rolling sliding. ASME J. Tribol., 1998, 120, 705-709.
36. Roelands, C. J. A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils. PhD Thesis, Technical University Delft, Delft, The Netherlands (V.R.B., Groningen, The Netherlands), 1966.
37. Dowson, D. and Higginson, G. R. Elastohydrodynamic lubrication, the fundamentals of roller and gear lubrication (Pergamon Press, Oxford, Great Britain).
38. Venner, C. H. and Lubrecht, A. A. Amplitude reduction of non-isotropic harmonic patterns in circular EHL contacts under pure rolling. Proceedings of the 1998 Leeds-Lyon Symposium on Tribology, Lyon, 1998, pp. 151-162.
39. Hooke, C. J. Elastohydrodynamic lubrication of soft solids. Proceedings of the 1996 Leeds-Lyon Symposium on Tribology, Leeds, 1996, pp. 185-197.
40. Hooke, C. J. and Venner C. H. Surface roughness attenuation in line and point contacts. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 439-444.
41. Venner, C. H., Berger, G., and Lugt, P. M. Waviness deformation in starved EHL circular contacts. ASME J. Tribol., 2003, 125, 739-746.
42. Venner, C. H. and Hooke, C. J. Surface roughness attenuation in EHL line and point contacts under conditions of starved lubrication. Presented at the IUTAM Symposium on Elasto and Micro Elasto-Hydrodynamic Lubrication, Cardiff, UK, September 2004. In press.
43. Damiens, B. Modelisation de la lubrification sousalimentee dans les contacts elastohydrodynamiques elliptiques (in French). PhD Thesis, INSA-Lyon, France.
44. Masen, M., Venner, C. H., Lugt, P. M., and Tripp, J. H. Effects of surface micro-geometry on the lift-off speed of an EHL contact. STLE Trans., 2002, 45(1), 21-30.
45. Hooke, C. J. Roughness attenuation and pressure rippling in EHL contacts. Presented at the IUTAM Symposium on Elasto and Micro Elasto-Hydrodynamic Lubrication, Cardiff, UK, September 2004. In press.
46. Venner, C. H., Kaneta, M., and Lubrecht, A. A. Surface roughness in EHL contacts. Proceedings of the 1999 Leeds-Lyon Symposium on Tribology, Leeds, 1999, pp. 25-36.