Some studies on the thermal-expansion behavior of C-Fiber, SiCp, and in-situ Mg2Si-reinforced AZ31 Mg alloy-based hybrid composites

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 1167-1176

  Thakur, S K ^a   Dhindaw, B K ^a   Hort, N ^b   Kainer, ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

^b INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AZ31 MG ALLOYS; COEFFICIENT OF LINEAR THERMAL EXPANSION; COEFFICIENT OF THERMAL EXPANSION; EXPANSION BEHAVIOR; FEW-CYCLE; HYBRID COMPOSITES; IN-SITU; INFILTRATION TECHNIQUES; LINEAR EXPANSIONS; THERMAL CYCLE; THERMAL TREATMENT;

CARBON FIBERS; GROWTH KINETICS; HEAT TREATMENT; MAGNESIUM; MAGNESIUM ALLOYS; SILICON ALLOYS; SILICON CARBIDE; THERMAL CYCLING; THERMAL STRESS;

THERMAL EXPANSION;

EID: 29244452216     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1020-9     Document Type: Article

References (37)

1. A. Luo: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2445-55.
2. ASM International Handbook Committee: Metals Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2.
3. A. Luo, J. Renaud, I. Nakatsugawa, and J. Plourde: JOM, 1995, vol. 7, p. 28.
4. Hu Lianxi and Wang Erde: Mater. Sci. Eng. A, 2000, vol. A278, pp. 267-71.
5. Karl Ulrich Kainer, Thorsten Ebert, and Barry L. Mordike: Proc. Int. Conf. on Spray Deposition and Melt Atomization, SDMA2000, Universität Bremen, Bremen, Germany, June 26-28, 2000, K. Bauckhage, V. Uhlenwinkel, and U. Fritsching, eds., Books on demand GmBH, Bremen, 2000, pp. 341-354.
6. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. A302, pp. 37-45.
7. J. Schröder and K.U. Kainer: Mater. Sci. Eng. A, 1991, vol. A135, pp. 33-36.
8. K.U. Kainer, H. Dieringa, P. Schulz, and J. Reiter: Proc. Int. Congr. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH Verlag GmbH, Weinheim, Germany, 2000, pp. 240-45.
9. Armin Feldoff, Eckhard Pippel, and Jörg Woltersdorf: Adv. Eng. Mater., 2000, vol. 2 (8), pp. 471-80.
10. L. Aggour, E. Fitzer, M. Heyn, and E. Ignatowitz: Thin Solid Films, 1977, vol. 40, p. 97.
11. I.J. Polmear: Light alloys - Metallurgy of the Light Metals, Edward Arnold, London, 1981.
12. I.J. Polmear: in Magnesium Alloys and their Applications, B.L. Mordike and F. Hehmann, eds., DGM Informations-Gesellschaft, Oberursel, 1992, pp. 201-12.
13. M.Ö. Pekgüleryüz and M.M. Avedisian: in Magnesium Alloys and Their Applications, B.L. Mordike and F. Hehmann, eds., DGM Informations-Gesellschaft, Oberursel, 1992, pp. 213-20.
14. H. Westengen: J. Phys. IV, vol. 3 (C7), 1993, pp. 491.
15. L.D. Wang, W.D. Fei, and C.K. Yao: Mater. Sci. Eng. A, 2002, vol. A336, pp. 110-16.
16. C.M. Warwick and T.W. Clyne: in Fundamental Relationships Between Microstructure and Mechanical Properties of Metal-Matrix Composites, P.K. Liaw and M.N. Gungor, eds., TMS, Warrendale, PA, 1990, pp. 209-23.
17. F. Chmelfík, Z. Trojanová, J. Kiehn, P. Lukác, and K.U. Kainer: Mater. Sci. Eng. A, 1997, vol. A234-A236, pp. 774-77.
18. Z.R. Xu, K.K. Chawla, A. Wolfenden, A. Neuman, G.M. Liggett, and N. Chawla: Mater. Sci. Eng. A, 1995, vol. A203, pp. 75-80.
19. F. Chmelfik, J. Kiehn, P. Luká;c, K.U. Kainer, and B.L. Mordike: Scripta Mater., 1998, vol. 38 (1), pp. 81-87.
20. M.H. Lin, W. Buchgraber, G. Korb, and P.W. Kao: Scripta Mater., 2002, vol. 46, pp. 169-73.
21. S.L. Kuo and P.W. Kao: Mater. Chem. Phys., 1999, vol. 58, pp. 83-6.
22. H. Hegeler, R. Buschmann, and I. Elstner: in Metallische Verbundwerkstoffe, K.U. Kainer, ed., DGM Informationsgesellschaft, Verlag, Germany, 1994, pp. 101-16.
23. K.U. Kainer: in Metallische Verbundwerkstoffe, K.U. Kainer, ed., DGM Informationsgesellschaft, Verlag, Germany, 1994, pp. 219-44.
24. S.K. Thakur, B.K. Dhindaw, N. Hort, and K.U. Kainer: Proc. 9th Int. Ann. Conf. on Composites Engineering, ICCE/9, David Hui, ed., San Diego, CA, July 1 -6, 2002, pp. 775-76.
25. S.T. Mileiko: in Handbook of Composites, A. Kelly and S.T. Mileiko, eds., Elsevier Science Publishers B.V., Amsterdam, 1983, vol. 4.
26. G.A. Geffrey and V.Y. Wu: Acta Crystallogr., 1963, vol. 16, pp. 559.
27. T.M. Gesing, R. Pöttgen, W. Jeitschko, and U. Wortmann: J. Alloys Compounds, 1992, vol. 186, p. 321.
28. C. Qui and R. Metselaar: J. Alloys Compounds, 1994, vol. 216, p. 55.
29. H.M. Flowers and A.J. Morris: in Magnesium Technology, Accession Number 87(10): 72-565, Institute of Metals, London, 1987, pp. 128-32.
30. J.C. Viala, F. Bosselet, G. Claveyrolas, F.B. Mentzen, and J. Bouix: Eur. J. Solid State Inorg. Chem., 1991, vol. 28, p. 1063.
31. F. Bosselet, B.F. Mentzen, J.C. Viala, M.A. Etoh, and J. Bouix: Eur. J. Solid State Inorg. Chem., 1998, vol. 35, pp. 91.
32. A. Feldhoff, E. Pippel, and J. Woltersdorf: Phil. Mag. A, 1999, vol. 79, p. 1263.
33. J.C. Viala, G. Claveyrolas, F. Bosselet, and J. Bouix: J. Mater. Sci., 2000, vol. 35, p. 1813.
34. Feng Wu and Jing Zhu: Compos. Sci. Technol., 1997, vol. 57, pp. 661-67.
35. D. Toitot, E. Andrieu, and P. Jarry: Proc. 12th Risø Int. Symp. on Metal Matrix Composites - Processing, Microstructure and Properties, N. Hansen, D.J. Jensen, T. Leffers, H. Lilholt, A.S. Pedersen, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Denmark, 1991, pp. 695-700.
36. W.G. Patterson and M. Taya: Proc. 5th Int. Conf. on Composite Materials - ICCM-V, W.C. Harrigan, J. Strife, and A. Dhingra, eds., TMS-AIME, Warrendale, PA, 1985, pp. 53-66.
37. Elhem Ghorbel: Compos. Sci. Technol., 1997, vol. 57, pp. 1045-56.