7.05 - Practical Application of Local Approach Methods

Comprehensive Structural Integrity: Nine Volume Set

Volumn 1-9, Issue , 2003, Pages 177-225

  Pineau, A ^a  

^a PSL RESEARCH UNIVERSITY   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 29144470086     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/07096-8     Document Type: Chapter

References (152)

1. M. Al Mundhari, P. Soulat and A. Pineau (1989) Irradiation embrittlement of a low alloy steel interpreted in terms of a local approach of cleavage fracture. Fatigue Fract. Eng. Mater. Struct. 12 19-30.
2. A.S. Argon, J. Im and R. Safoglu (1975) Cavity formation from inclusions in ductile fracture. Metall. Trans. A 6 825-837.
3. S. Arndt, B. Swendsen and D. Klingbeil (1997) Modellierung der Eigenspannungen and der Rissspitze mit einem Schädigungsmodell. Technische Mechanik 17 323-332.
4. ASTM E 1921--97, 1998, Standard test method for determination of reference temperature, T 0, for ferritic steels in the transition range. Am. Soc. Test. Mater., 03.01, 1068--1084.
5. P. Auger, F. Danoix, A. Menand, S. Bonnet, J. Bourgoin and M. Guttmann (1990) Atom probe and transmission electron microscopy study of ageing of cast duplex stainless steels. Mater. Sci. Technol. 6 301-313.
6. A. Bakker and R.W.J. Koers (1991) Prediction of cleavage fracture events in the brittle--ductile transition region of a ferritic steel. J.G. Blauel, K.-H. Schwalbe (Eds) Defect Assessment in Components Fundamentals and Applications, ESIS/EG9 London: Mechanical Engineering Publications 613-632.
7. L. Bauvineau, 1996, Approche locale de la rupture ductile: application à un acier Carbone-Manganèse. Ph.D. thesis, Ecole des Mines de Paris, December 11.
8. A. Benzerga and J. Besson (2001) Plastic potentials for anisotropic porous solids. Euro. J. Mechanics-A solids 20 397-434.
9. A. Benzerga, J. Besson and A. Pineau (1999) Coalescence-controlled anisotropic ductile fracture. J. Eng. Mater. Technol. 121 221-229.
10. F.M. Beremin (1981) Numerical modeling of warm prestress effect using a damage function for cleavage fracture. D. François (Eds) ICF5, Advances in Fracture Research. vol. II Pergamon 825-832.
11. F.M. Beremin (1983) A local criterion for cleavage fracture of a nuclear pressure vessel steel. Metall. Trans. A 14 2277-2287.
12. C. A. Berg, 1962, “Proc. of the Motion of Cracks in Plane Viscous Deformation. 4th US National Congress of Applied Mechanics,” ed. R. M. Rosenberg, University of California, June 18--21, pp. 885--892.
13. G. Bernauer, W. Brocks and W. Schmitt (1999) Modifications of the Beremin model for cleavage fracture in the transition region of a ferritic steel. Eng. Fract. Mech. 64 305-325.
14. J. Besson and R. Foerch (1997) Large scale object-oriented finite element code design. Comp. Methods Appl. Mech. Eng. 142 165-187.
15. M. Bethmont, J.M. Frund, B. Housin and P. Soulat (1994) The toughness of irradiated pressure water reactor (PWR) vessel shell rings and the effect of segregation zones. D.S. Gelles, R.K. Nensted, A.S. Kumar, E.A. Little (Eds) Effects of Radiation on Materials: 17th International Symposium, Sun Valley, June 20--23, 1994, ASTM STP 1270 American Society for Testing and Materials 320-330.
16. B.A. Bilby, I.C. Howard and Z.H. Li (1993) Prediction of the first spinning cylinder test using ductile damage theory. Fatigue Fract. Eng. Mater. Struct. 16 1-20.
17. S. Bugat, 2000, Comportement et endommagement des aciers austéno-ferritiques vieillis: une approche mécanique. Ph.D. thesis, Ecole des Mines de Paris.
18. S. Bugat, J. Besson and A. Pineau (1999) Micromechanical modeling of the behavior of duplex stainless steels. Comp. Mater. Sci. 16 158-166.
19. M.C. Burstow and I.C. Howard (1996) Predicting the effects of crack tip constraint on material resistance curves using ductile damage theory. Fatigue Fract. Eng. Mater. Struct. 19 461-474.
20. S. Carassou, S. Renevey, B. Marini and A. Pineau (1998) Modelling of the ductile to brittle transition of a low alloy steel. M.W. Brown, E.R. de los Rios, K.J. Miller (Eds) Fracture from Defects, ESIS/ECF12 vol. 2 London, UK: EMAS, Chameleon Press 691-696.
21. N. Cardinal, C.S. Wiesner, M.R. Goldthorpe and A.C. Bannister (1996) Application of the local approach to cleavage fracture to failure predictions of heat affected zones. Euromech-Mecamat. J. Phys. IV 6 C6. C6-194
22. C.C. Chu and A. Needleman (1980) Void nucleation effects in biaxially stretched sheets. J. Eng. Mater. Technol. 102 249-256.
23. A.H. Cottrell (1989) Strengths of grain boundaries in pure metals. Mater. Sci. Technol. 5 1165-1167.
24. A.H. Cottrell (1990) Strengthening of grain boundaries by segregated interstitials in iron. Mater. Sci. Technol. 6 121-123.
25. A.H. Cottrell (1990) Strength of grain boundaries in impure metals. Mater. Sci. Technol. 6 325-329.
26. D.A. Curry and J.F. Knott (1978) Effect of microstructure on cleavage fracture stress in steel. Metal Sci. 12 511-514.
27. D.A. Curry and J.F. Knott (1979) Effect of microstructure on cleavage fracture toughness of quenched and tempered steels. Metal Sci. 13 341-345.
28. K. Decamp, L. Bauvineau, J. Besson and A. Pineau (1997) Size and geometry effect on ductile rupture of notched bars in a C--Mn steel: experiments and modelling. Int. J. Fract. 88 1-18.
29. P. De Roo, B. Marandet, G. Phelippeau and G. Rousselier, 1984, Effect of specimen dimensions on J R at initiation of crack growth by ductile tearing. In: “Fracture Mechanics, 15th Symposium, ASTM STP 833,” ed. R. J. Sanford, ASTM, Philadelphia, pp. 606-621.
30. L. Devillers-Guerville, 1998, Ruptures d'aciers inoxydables austéno-ferritiques moulés, fragilisés par vieillissement à 350--400°C: aspects microstructuraux---Simulation numérique de la dispersion et des effets d'échelle. Ph.D. thesis, Ecole des Mines de Paris.
31. L. Devillers-Guerville, J. Besson and A. Pineau (1997) Notch fracture toughness of a cast duplex stainless steel: modelling of experimental scatter and size effects. Nucl. Eng. Des. 168 211-225.
32. M. Di Fant, V. Le Coq, O. Cleizergues, G. Carollo, F. Mudry, L. Bauvineau, H. Burlet, A. Pineau, B. Marini, M. Koundy, C. Sainte Catherine and C. Eripret (1996) Development of a simplified approach for using the local approach to fracture. Euromech-Mecamat. J. Phys. IV Colloque C6 6 C6. C6-512
33. M. Di Fant, V. Le Coq, O. Cleizergues, G. Carollo, F. Mudry, L. Bauvineau, H. Burlet, A. Pineau, B. Marini, M. Koundy, C. Sainte Catherine and C. Eripret, 1996b, Mise en place d'une méthodologie simplifiée pour utiliser les critères locaux de rupture. Final Report. Convention MRES, No. 92, A.0334, IRSID RE 96.03, IRSID, Maizières-les-Metz, France.
34. R.H. Dodds Jr., T.L. Anderson and M.T. Kirk (1991) A framework to correlate a/w ratio effects on elastic--plastic fracture toughness (J c). Int. J. Fract. 48 1-22.
35. ESIS P6-98, 1998, Procedure to measure and calculate material parameters for the local approach to fracture using notched tensile specimens; Procedure Document, European Structural Integrity Society (ESIS), March 1998.
36. Euromech-Mecamat'96, 1996, “First European Mechanics of Materials Conference on Local Approach to Fracture,” eds. A. Pineau and G. Rousselier, Les Editions de Physique, Fontainebleau, France, C6-3--C6-558.
37. D. François and A. Pineau (2001) Fracture of metals: Part II. Ductile fracture. E. Bouchaud, D. Jeulin, C. Prioul, S. Roux (Eds) Physical Aspects of Fracture Dordrecht: Kluwer 125-146.
38. X. Gao and R.H. Dodds (2000) Constraint effects on the ductile-to-brittle transition temperature of ferritic steels: a Weibull stress model. Int. J. Fract. 102 43-69.
39. X. Gao, R.H. Dodds Jr., R.L. Tregoning, J.A. Joyce and R.E. Link (1999) A Weibull stress model to predict cleavage fracture in plates containing surface cracks. Fatigue Fract. Eng. Mater. Struct. 22 481-493.
40. X. Gao, C. Ruggieri and R.H. Dodds (1998) Calibration of Weibull stress parameters using fracture toughness data. Int. J. Fract. 92 175-200.
41. S.J. Garwood (1982) Geometry and orientation effects on ductile crack growth resistance. Int. J. Pres. Ves. Piping 10 297-319.
42. M. Gologanu, J.B. Leblond and J. Devaux (1993) Approximate models for ductile metals containing non-spherical voids---case of axisymmetric prolate ellipsoidal cavities. J. Mech. Phys. Solids 41 1723-1754.
43. J.D.G. Groom and J.F. Knott (1975) Cleavage fracture in prestrained mild steel. Metal Sci. 9 390-400.
44. A. Gurson (1977) Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol. 99 2-15.
45. J. Heerens and D. Hellmann (2002) Development of the Euro fracture toughness dataset. Eng. Fract. Mech. 69 421-449.
46. J.J. Heger (1951) 885°F embrittlement of ferritic chromium--iron alloys. Metal Progress. 60 55-61.
47. M. Henry, B. Marandet, F. Mudry and A. Pineau (1985) Effets de la température et de la vitesse de chargement sur la ténacité à rupture d'un acier faiblement allié---Interprétation par des critères locaux. Journal de Mécanique Théorique et Appliquée 4 741-768.
48. Y. Huang (1991) Accurate dilatation rates for spherical voids in triaxial stress fields. J. Appl. Mech. 58 1084-1086.
49. J.W. Hutchinson (1968) Plastic stress and strain fields at a crack tip. J. Mech. Phys. Solids 16 337-347.
50. T. Iwadate, Y. Tanaka, H. Takemata and T. Kabutomori (1985) Elastic--Plastic fracture toughness behavior of heavy section steels for nuclear pressure vessels. Nucl. Eng. Des. 87 89-99.
51. D. Jeulin, 1990, Random fields models for fracture statistics, 32ème Colloque de Métallurgie, INSTN, Ed. de la Revue de Métallurgie, No. 4, pp. 99--113.
52. D. Jeulin, 2002, Random structure models for homogenization and fracture statistics. In: “Mechanics of Random and Multiscale Microstructures,” CISM Lecture Notes No. 430, eds. D. Jeulin and M. Ostoja-Starzewski, Springer, Wien--New York.
53. P. Joly, R. Cozar and A. Pineau (1990) Effect of crystallographic orientation of austenite on the formation of cleavage cracks in ferrite in an aged duplex stainless steel. Scr. Metall. Mater. 24 2235-2240.
54. P. Joly and A. Pineau (1995) Modelling of the effect of thermal aging of duplex stainless steels on their fracture toughness. Scand. J. Metall. 24 226-236.
55. J. Kameda and C.J. Mc Mahon (1980) Solute segregation and brittle fracture in an alloy steel. Metall. Trans. A 11 91-101.
56. E. Kantidis, B. Marini and A. Pineau (1994) A criterion for intergranular brittle fracture of a low alloy steel. Fatigue Fract. Eng. Mater. Struct. 17 619-633.
57. A.S. Kim, J. Besson and A. Pineau (1999) Global and local approaches to fracture normal to interfaces. Int. J. Solids Struct. 36 1845-1864.
58. Y.J. Kim and K.-H. Schwalbe (2001) Mismatch effect on plastic yield loads in idealised weldments: I. Weld center cracks. Eng. Fract. Mech. 68 163-182.
59. Y.J. Kim and K.-H. Schwalbe (2001) Mismatch effect on plastic yield loads in idealised weldments: II. Heat affected zone cracks. Eng. Fract. Mech. 68 183-199.
60. J.F. Knott (1966) Some effects of hydrostatic tension on the fracture behaviour of mild steel. J. Iron Steel Inst. 204 104-111.
61. J.F. Knott (1967) Effects of strain on notch brittleness in mild steel. J. Iron Steel Inst. 205 966-969.
62. J. Koplik and A. Needleman (1988) Void growth and coalescence in porous plastic solids. Int. J. Solids Struct. 24 835-853.
63. A.J. Krasowsky (2001) Characteristic distance as a material's structure parameter in the theory of fracture emanating from notches and cracks. G. Pluvinage, M. Gjonaj (Eds) Notch Effects in Fatigue and Fracture Dordrecht: Kluwer Academic 23-38.
64. D. J. Lacey and R. E. Leckenby, 1989, Determination of upper shelf fracture resistance in the spinning cylinder test facility. In: “Transactions of the 10th International Conference on Structures of Mechanics in Reactor Technology,” Anaheim, August 1--6.
65. A. Lambert, 2001, Rupture par clivage de microstructures d'aciers bainitiques obtenues en conditions de soudage. Ph.D. thesis, Ecole des Mines, May 3, 2001.
66. A. Lambert, J. Drillet, A.F. Gourgues, T. Sturel and A. Pineau (2000) Microstructure of martensite---austenite constituents in heat affected zones of high strength low alloy steel welds in relation to toughness properties. Sci. Technol. Weld. Join. 5 168-173.
67. J. B. Leblond and G. Perrin, 1991, Analytic study of the coalescence of cavities in ductile fracture of metals. In: “Anisotropy and localization of plastic deformation: Proceedings of Plasticity ’91, the 3rd International Symposium on Plasticity and its Current Applications,” pp. 233--236.
68. J.B. Leblond, G. Perrin and J. Devaux (1995) An improved Gurson-type model for hardenable ductile metals. Euro. J. Mech. A/Solids 14 499-527.
69. Y. Lei, N.P. O'Dowd, E.P. Busso and G.A. Webster (1998) Weibull stress solutions for 2-D cracks in elastic and elastic--plastic materials. Int. J. Fract. 89 245-268.
70. J. Lemaítre (1985) A continuous damage mechanics model for ductile fracture. J. Eng. Mater. Technol. 107 83-89.
71. T. Lin, A.G. Evans and R.O. Ritchie (1986) A statistical model of brittle fracture by transgranular cleavage. J. Mech. Phys. Solids 34 477-497.
72. S. Machida, T. Miyata, Y. Hagiwara, H. Yoshinari and T. Suzuki (1991) A statistical study of the effect of local brittle zones (LBZ) on the fracture toughness (CTOD) of weldments. J.G. Blauel, K.H. Schwalbe (Eds) Defect Assessment in Components---Fundamentals and Applications, ESIS/EGF9 London: MEP 633-658.
73. K.K. Mathur, A. Needleman and V. Tvergaard (1993) Dynamic 3-D analysis of the Charpy V---notch test. Modell. Simulation Mater. Sci. Eng. 1 467-484.
74. K.K. Mathur, A. Needleman and V. Tvergaard (1994) 3-D analysis of failure modes in the Charpy impact test. Modell. Simulation Mater. Sci. Eng. 2 617-635.
75. C. G. Matos and R. H. Dodds, Jr., Modelling the effects of residual stresses on cleavage fracture in welded steel frames. In: “ICF 10 Conference, December 2–6, 2001, Hawaii.”
76. F.A. Mc Clintock (1968) A criterion for ductile fracture by the growth of holes. J. Appl. Mech. 35 363-371.
77. F.A. Mc Clintock (1971) Plasticity aspects of fracture. H. Liebowitz (Eds) Fracture vol. 3 New York and London: Academic Press 47-225.
78. M. Mear and J. Hutchinson (1985) Influence of yield surface curvature on flow localization in dilatant plasticity. Mech. Mater. 4 395-407.
79. F. Minami and K. Arimochi (2001) Evaluation of prestraining and dynamic loading effects on the fracture toughness of structural steels by the local approach. J. Pres. Ves. Technol. 123 362-372.
80. F. Minami, A. Brückner-Foit, D. Munz and B. Trolldenier (1992) Estimation procedure for the Weibull parameters used in the local approach. Int. J. Fract. 54 197-210.
81. F. Minami, M. Iida, W. Takahara, N. Konda and K. Arimochi, 2002, Fracture mechanics analysis of Charpy test results based on the Weibull stress criterion. In: “From Charpy to Present Impact Testing,” eds. D. François and A. Pineau, Elsevier and ESIS, pp. 411–418.
82. D. Moinereau, J. Brochard, M.P. Valeta, S. Bandhari, D. Guichard, C. France, D.J. Sanderson and A. Sherry (1997) The application of the local approach to fracture to the structural integrity assessment of cladded vessels under thermal loadings. SMIRT 14 4 655-663.
83. D. Moinereau, J.M. Frund, J. Brochard, B. Marini, P. Joly, D. Guichard, S. Bandhari, A. Sherry, D.J. Sanderson, D. France and D.P.G. Lidbury (1996) Local approach to fracture applied to reactor pressure vessel: synthesis of a cooperative programme between EDF, CEA, Framatome and AEA. J. Phys. IV 6 C6. C6-257
84. R. Moskovic (2002) Modelling of fracture toughness data in the ductile-to-brittle transition temperature region by statistical analysis. Eng. Fract. Mech. 69 511-530.
85. F. Mudry, 1982, Etude de la rupture ductile et de la rupture par clivage d'aciers faiblement alliés. Ph.D. thesis, Université de Technologie de Compiègne.
86. F. Mudry (1987) A local approach to cleavage fracture. Nucl. Eng. Des. 105 65-76.
87. C. Naudin, 1999, Modélisation de la ténacité de l'acier de cuve REP en présence de zones de segregation. Ph.D. thesis, Ecole des Mines, June 24.
88. C. Naudin, J.M. Frund and A. Pineau (1999) Intergranular fracture stress and phosphorus grain boundary segregation of a Mn--Ni--Mo steel. Scr. Mater. 40 1013-1019.
89. C. Naudin, A. Pineau and J. M. Frund, 2001, Toughness modelling of PWR vessel steel containing segregated zones. In: “10th Conference on environmental degradation of materials in nuclear power systems---water reactors, Lake Tahoe, Nevada (USA), August 5--9.”
90. A. Needleman and V. Tvergaard (2000) Numerical modeling of the ductile--brittle transition. Int. J. Fract. 101 73-97.
91. Nuclear Engineering and Design, 1987, Selected papers from the International Seminar on Local Approach to Fracture, Moret sur Loing, France. Nucl. Eng. Des., 105, 1--153.
92. N.P. O'Dowd, Y. Lei and E.P. Busso (2000) Prediction of cleavage failure probabilities using the Weibull stress. Eng. Fract. Mech. 67 87-100.
93. M. Ohata, F. Minami and M. Toyoda (1996) Local approach to strength mis-match effect on cleavage fracture of notched material. Euromech-Mecamat. J. Phys. IV 6 C6. C6-278
94. A. Pineau (1982) Review of fracture micromechanisms and a local approach to predicting crack resistance in low strength steels. D. François (Eds) Advances in Fracture Research, ICF 5 Oxford, UK: Pergamon 553-577.
95. A. Pineau (1992) Global and local approaches of fracture---transferability of laboratory test results to components. A.S. Argon (Eds) Topics in Fracture and Fatigue New York: Springer 197-234.
96. A. Pineau (1995) Effect of inhomogeneities in the modelling of mechanical behaviour and damage of metallic materials. A. Bakker (Eds) Mechanical Behaviour of Materials Delft, The Netherlands: Delft University 1-22.
97. A. Pineau (2001) The randomness of fatigue and fracture behavior in metallic materials and mechanical structures. D. Jeulin, M. Ostoja Starzewski (Eds) Mechanics of Random and Multiscale Microstructures, CISM Courses and Lecture Series New York: Springer 165-219.
98. A. Pineau and J. Besson (2000) Some new trends in modelling ductile rupture of structural alloys. A. Benallal (Eds) Continuous Damage and Fracture Paris: Elsevier 281-292.
99. A. Pineau and P. Joly (1991) Local versus global approaches to elastic--plastic fracture mechanics. J.G. Blauel, K.H. Schwalbe (Eds) Application to Ferritic Steels and a Cast Duplex Stainless Steel in ‘Defect Assessment in Components---Fundamentals and Applications,’ ESIS/EGF9 London: Mechanical Engineering Publications 381-414.
100. P. Ponte-Castaneda and M. Zaidman (1994) Constitutive models for porous materials with evolving microstructure. J. Mech. Phys. Solids 42 1459-1497.
101. J.R. Rice and G.F. Rosengren (1968) Plane strain deformation near a crack tip in a power-law hardening material. J. Mech. Phys. Solids 16 1-12.
102. J.R. Rice and D.M. Tracey (1969) On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 201-217.
103. R.O. Ritchie, J.F. Knott and J.R. Rice (1973) On the relationship between critical tensile stress and fracture toughness in mild steel. J. Mech. Phys. Solids 21 395-410.
104. F. Rivalin, 1998, Développement d'aciers pour gazoducs à haute limite d'élasticité et ténacité élevée: mécanique et mécanismes de la rupture ductile à grande vitesse. Ph.D. thesis, Ecole des Mines de Paris, March 3.
105. F. Rivalin, J. Besson, A. Pineau and M. Di Fant (2001) Ductile tearing of pipeline-steel wide plates: II. Modeling of in-plane crack propagation. Eng. Fract. Mech. 68 347-364.
106. F. Rivalin, A. Pineau, M. Di Fant and J. Besson (2001) Ductile tearing of pipeline-steel wide plates: I. Dynamic and quasi static experiments. Eng. Fract. Mech. 68 329-345.
107. S. T. Rolfe and J. M. Barsom, 1977, Fracture and fatigue control in structures. In: “Applications of Fracture Mechanics,” Prentice-Hall, Englewood Cliffs, NJ.
108. A. Romeo and R. Ballarini (1994) The influence of elastic mismatch on the size of the plastic zone of a crack terminating at a brittle--ductile interface. Int. J. Fract. 65 183-196.
109. A. Romeo and R. Ballarini (1995) A crack very close to a bimaterial interface. J. Appl. Mech. 62 614-619.
110. E. Roos, U. Alsmann, K. Elsässer, W. Eisele and M. Seidenfuss, 1998, Experiments on warm prestress effect and their numerical simulation based on local approach. In: “Fracture from Defects,” ECF 12, eds. M. W. Brown, E. R. de los Rios and K. J. Miller, vol. II, pp. 939--944.
111. A. Rossol, 1998, Fracture toughness determination of a low alloy steel by instrumented Charpy impact tests. Ph.D. thesis, Ecole Centrale des Arts et Manufactures.
112. G. Rousselier (1987) Ductile fracture models and their potential in local approach of fracture. Nucl. Eng. Des. 105 97-111.
113. C. Ruggieri and R.H. Dodds Jr. (1996) A transferability model for brittle fracture including constraint and ductile tearing effects: A probabilistic approach. Int. J. Fract. 79 309-340.
114. C. Ruggieri, R.H. Dodds Jr. and K. Wallin (1998) Constraints effects on reference temperature T 0 for ferritic steels in the transition region. Eng. Fract. Mech. 60 19-36.
115. C. Ruggieri, X. Gao and R.H. Dodds Jr. (2000) Transferability of elastic--plastic fracture toughness using the Weibull stress approach: significance of parameter calibration. Eng. Fract. Mech. 67 101-117.
116. P. Saillard, J.C. Devaux and A. Pellissier-Tanon (1987) Numerical prediction of the fracture of a thick pressurized shell subjected to a liquid nitrogen shock. Nucl. Eng. Des. 105 83-88.
117. M. Saje, J. Pan and A. Needleman (1982) Void nucleation effects on shear localization in porous plastic solids. Int. J. Fract. 19 163-182.
118. W. Schmitt, I. Varfolomeyer and W. Böhme, 2001, Modeling of the Charpy test as a basis for toughness evaluation. In: “From Charpy to Present Impact Testing,” eds. D. François and A. Pineau, Elsevier and ESIS, Oxford, pp. 45–56.
119. W. Schmitt, W. Böhme and D.Z. Sun (1994) New developments in fracture toughness evaluation. K.H. Schwalbe, C. Berger (Eds) Structural Integrity, ECF10 Warley, UK: EMAS 159-170.
120. W. Schmitt, D. Sun, W. Böhme and G. Nagel (1994) Evaluation of fracture toughness based on results of instrumented Charpy tests. Int. J. Pres. Ves. Piping 59 21-29.
121. W. L. Server and W. Oldfield, 1978, Nuclear pressure vessel steel database, EPRI Report No NP - 933, Electric Power Research, Palo Alto, California.
122. A. H. Sherry, D. P. G. Lidbury, D. C. Connors and A. R. Dowling, 2001, Modelling of size effects on fracture in the brittle-to-ductile transition regime. In: “ICF 10 Conference, December 2--6, 2001, Hawaii.”
123. H. Stöckl, R. Böschen, W. Schmitt, I. Varfolomeyev and J.H. Chen (2000) Quantification of the warm prestressing effect in a shape welded 10 Mn Mo Ni 5-5 material. Eng. Fract. Mech. 67 119-137.
124. J.D.G. Sumpter (1993) An experimental investigation of the T stress approach. E.M. Hackett, K.H. Schwalbe, R.H. Dodds (Eds) Constraint Effects in Fracture, ASTM STP 1171 Philadelphia, PA: ASTM 492-502.
125. M. Tahar, 1998, Applications de l'approche locale de la rupture fragile à l'acier 16MND5: Correlation Résilience---Ténacité et Probabilité de rupture bimodale. Ph.D. thesis, Ecole des Mines de Paris.
126. W.H. Tai and B.X. Yang (1986) A new microvoid-damage model for ductile fracture. Eng. Fract. Mech. 25 377-384.
127. W.H. Tai and B.X. Yang (1987) A new damage mechanics criterion for ductile fracture. Eng. Fract. Mech. 27 371-378.
128. B. Tanguy, 2001, Modélisation de l'essai Charpy par l'approche locale de la rupture. Application au cas de l'acier 16 MND 5 dans le domaine de la transition. Ph.D. thesis, Ecole des Mines de Paris.
129. B. Tanguy and J. Besson (2002) An extension of the Rousselier model to viscoplastic temperature dependent materials. Int. J. Fract. 116 81-101.
130. B. Tanguy, J. Besson, R. Piques and A. Pineau (2002) Numerical modeling of Charpy V-notch tests. D. François, A. Pineau (Eds) From Charpy to Present Impact Testing Elsevier and ESIS 461-468.
131. B. Tanguy, R. Piques, L. Laiarinandrasana and A. Pineau, 2000a, Mechanical behaviour of A 508 steel based on double non linear viscoplastic constitutive equations. In: “Advances in Mechanical Behaviour. Plasticity and Damage, Euromat 2000,” eds. D. Miannay, P. Costa, D. François and A. Pineau, Tours, France, Elsevier, Amsterdam, pp. 499–504.
132. B. Tanguy, R. Piques, L. Laiarinandrasana and A. Pineau, 2000b, Notch stress strain distribution in Charpy V specimen/experiments and modelling. In: “Fracture Mechanics: Applications and Challenges,” ECF 13, Elsevier, New York, p. 157
133. B. Tanguy, R. Piques and A. Pineau (2002) Experimental analysis of Charpy V-notch specimens. D. François, A. Pineau (Eds) From Charpy to Present Impact Testing Elsevier and ESIS 453-460.
134. P.F. Thomason (1968) A theory for ductile fracture by internal necking of cavities. J. Inst. Metals 96 360-365.
135. P.F. Thomason (1985) A three-dimensional model for ductile fracture by the growth and coalescence of microvoids. Acta Metall. 33 1087-1095.
136. P.F. Thomason (1985) Three-dimensional models for the plastic limit loads at incipient failure of the intervoid matrix in ductile porous solids. Acta Metall. 33 1079-1085.
137. V. Tvergaard (1990) Material failure by void growth to coalescence. Adv. Appl. Mech. 27 83-151.
138. V. Tvergaard and A. Needleman (1984) Analysis of cup-cone fracture in a round tensile bar. Acta Metall. 32 157-169.
139. V. Tvergaard and A. Needleman (1988) An analysis of the temperature and rate dependence of Charpy V-notch energies for a high nitrogen steel. Int. J. Fract. 37 197-215.
140. V. Tvergaard and A. Needleman (2000) Analysis of the Charpy V---notch test for welds. Eng. Fract. Mech. 65 627-643.
141. K. Wallin, T. Saario and K. Torronen (1984) Statistical model for carbide induced brittle fracture in steel. Metal Sci. 18 13-16.
142. K. Wallin (1989) The effect of ductile tearing on cleavage fracture probability in fracture toughness testing. Eng. Fract. Mech. 32 523-531.
143. K. Wallin (1991) Fracture toughness transition curve shape for ferritic structural steels. S.H. Teoh, K.H. Lee (Eds) Proceedings of the Joint FEFG/ICF International Conference on Fracture Engineering Materials and Structures London: Elsevier Applied 83-88.
144. K. Wallin (1991) Statistical modelling of fracture in the ductile-to-brittle transition region. J.G. Blauel, K.H. Schwalbe (Eds) Defect Assessment in Components---Fundamentals and Applications, ESIS/EGF9 London: Mechanical Engineering Publications 415-445.
145. W. Weibull (1939) A statistical theory of the strength of materials. Proc. Roy. Swedish Inst. Eng. Res. 151 1-53.
146. W. Weibull (1951) A statistical distribution function of wide applicability. J. Appl. Mech. 18 293-297.
147. L. Xia and L. Cheng (1997) Transition from ductile tearing to cleavage fracture. A cell model approach. Int. J. Fract. 87 289-305.
148. L. Xia and F.C. Shih (1996) Ductile crack growth: III. Transition to cleavage fracture incorporating statistics. J. Mech. Phys. Solids 44 603-639.
149. O.M.L. Yahya, F. Borit, R. Piques and A. Pineau (1998) Statistical modelling of intergranular brittle fracture in a low alloy steel. Fatigue Fract. Eng. Mater. Struct. 21 1485-1502.
150. A. Zak and M. Williams (1963) Crack point singularities at a bimaterial interface. J. Appl. Mech. 30 142-143.
151. Z.L. Zhang and E. Niemi (1994) Analyzing ductile fracture using dual dilational constitutive equations. Fatigue Fract. Eng. Mater. Struct. 17 695-707.
152. Z.L. Zhang and E. Niemi (1995) A new failure criterion for the Gurson--Tvergaard dilational constitutive model. Int. J. Fract. 70 321-334.