Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: Part II - Numerical studies

Journal of Composite Materials

Volumn 39, Issue 23, 2005, Pages 2091-2113

  Riccio, A ^a  

^a ITALIAN AEROSPACE RESEARCH CENTER   (Italy)

Author keywords

Composites; Contact; Failure criteria; FEM; Joints; Progressive damage

Indexed keywords

COMPOSITE MATERIALS; FAILURE (MECHANICAL); FINITE ELEMENT METHOD; GEOMETRY; LOADS (FORCES); MATHEMATICAL MODELS; NONDESTRUCTIVE EXAMINATION;

CONTACTS; FAILURE CRITERIA; JOINTS; PROGRESSIVE DAMAGE;

BOLTED JOINTS;

EID: 29144456544     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/0021998305052027     Document Type: Article

References (32)

1. Ochoa, O.O. and Reddy, J.N. (1992). Finite Element Analysis of Composite Laminates, Kluwer Academic Publishers, Dordrecht, The Netherlands.
2. Sleight, D.W., Knight, N.F. and Wang, J.T. (1997). Evaluation of a Progressive Failure Analysis Methodology for Laminated Composite Structures, AIAA Paper, 97-1187, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 38th, and AIAA/ASME/AHS Adaptive Structures Forum, Kissimmee, FL, Apr. 7-10, 1997. Collection of Technical Papers, Pt. 3 (A97-24112 05-39).
3. Hashin, Z. and Rotem, A. (1973). A Fatigue Failure Criterion for Fibre Reinforced Materials, Journal of Composite Materials, 7: 448-474.
4. Hashin, Z. (1980). Failure Criteria for Unidirectional Fibre Composites, Journal of Applied Mechanics, 47: 329-334.
5. Yamada, S.E. and Sun, C.T. (1978). Analysis of Laminate Strength and its Distribution, Journal of Composite Materials, 12: 275-284.
6. Christensen, R.M. (1988). Tensor Transformation and Failure Criteria for the Analysis of Fibre Composite Materials, Journal of Composite Materials, 22: 874-897.
7. Tsai, S.W. and Wu, E.M. (1971). A General Theory of Strength for Anisotropic Material, Journal of Composite Materials, 5: 58-80.
8. Feng, W.W. (1991). A Failure Criterion for Composite Materials, Journal of Composite Materials, 25: 88-100.
9. Murray, Y. and Schwer, L. (1990). Implementation and Verification of Fiber-Composite Damage Models, Failure Criteria and Analysis in Dynamic Response, ASME AMD, 107: 21-30.
10. Petit, P.M. and Waddoups, M.E. (1969). A Method of Predicting the Non-linear Behaviour of Laminated Composites, Journal of Composite Materials, 3: 2-19.
11. Sandhu, R.S. (1974). Non-linear Behaviour of Unidirectional and Angle Ply Laminates, AIAA Journal of Aircraft, 13: 104-111.
12. Nahas, M.N. (1986). Survey of Failure and Post-Failure Theories of Laminated Fibre-Reinforced Composites, Journal of Composites Technology and Research, 8: 138-153.
13. Hahn, H.T. and Tsai, S.W. (1983). On the Behaviour of Composite Laminates After Initial Failures, Astronautics and Aeronautics, 21: 58-62.
14. Chang, F.K., Scott, R.A. and Springer, G.S. (1984). Failure of Composite Laminates Containing Pin Loaded Holes - Method of Solution, Journal of Composite Materials, 18: 255-278.
15. Kim, S.J. and Hwang, J.S. (1998). Progressive Failure Analysis of Pin-Loaded Laminated Composites Using Penalty Finite Element Method, AIAA Journal, 36: 75-80.
16. Lessard, L.B. and Shokrieh, M.M. (1995). Two-dimensional Modelling of Composite Pinned-Joint Failure, Journal of Composite Materials, 29: 671-697.
17. Collings, T.A. (1982). On the Bearing Strength of CFRP Laminates, Composites, 13: 241-252.
18. Chang, L.H. and Chang, F.K. (1996). Bearing Failure of Bolted Composite Joints. Part II: Model and Verification, Journal of Composite Materials, 30: 1359-1400.
19. Mahmood, M., Shokrieh, M.M. and Lessard, L.B. (1996). Effect of Material Non-linearity on the Three-Dimensional Stress State of Pin-Loaded Composite Laminates, Journal of Composite Materials, 30: 839-861.
20. Matthews, F.L., Wong, C.M. and Chryssafitis, S. (1982). Stress Distribution Around a Single Bolt in Fibre-Reinforced Plastic, Composites, 13: 316-322.
21. Sperling, U.O. (1985). Three-Dimensional Stress Distribution Around Pin Loaded Holes in Composite Laminates, In: AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Material Conference 85-0826: 743-750, Orlando, FL, April 15-17, 1985
22. Technical Papers, Part l (A85-30226 13-39). New York, American Institute of Aeronautics and Astronautics, 1985, pp. 743-750.
23. Ireman, T. (1998). Three-Dimensional Stress Analysis of a Bolted Single-Lap Composite Joint, Composites Structures, 43: 195-216.
24. Perugini, P., Riccio, A. and Scaramuzzino, F. (2001). Three-Dimensional Progressive Damage Analysis in Composite Joints, In: Topping, B.H.V. (ed.), Proceedings of the Eighth International Conference on Civil and Structural Engineering Computing, Civil-Comp Press, Stirling, Scotland.
25. Sun, H.T., Chang, F.K. and Qing, X. (2002). The Response of Composite Joints with Bolt-Clamping Loads. Part I: Model Development, Journal of Composite Materials, 36(1): 47-67.
26. Riccio, A. and Marciano, L. (2005). Effects of Geometrical and Material Features on Damage Onset and Propagation in Single-Lap Bolted Composite Joints Under Tensile Load. Part 1: Experimental Studies, Journal of Composite Materials, 39(23): 2071-2090.
27. Zhong, Z.H. (1993). Finite Element Procedures for the Contact Impact Problems, Oxford Science Publications, Oxford.
28. Perugini, P., D'anna, G., Riccio, A., Scaramuzzino, F. and Tessitore, N. (1999). Progressive Failure Analysis of Composite Joints, In: ASME Conference, Virginia, US.
29. ANSYS, Inc. (1994). ANSYS MANUALS (Release 5.3), Houston, US.
30. Sleight, D.W. (1999). Progressive Failure Analysis Methodology for Laminated Composite Structures, NASA/TP-1999-209107.
31. Paris, F. (2001). A Study of Failure Criteria of Fibrous Composite Materials, NASA/CR-2001-210661.
32. Wang, J.T., Lotts, C.G. and Sleight, D.W. (1999). Analysis of Discrete Source Damage Progression in a Tensile Stiffened Composite Panel, AIAA Paper, 99-1336, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 40th, St. Louis, MO, Apr. 12-15, 1999, Collection of Technical Papers, Vol. 2 (A99-24601 05-39).