Experimental investigation of the behavior of extra high strength steel

Experimental Mechanics

Volumn 45, Issue 6, 2005, Pages 533-540

  Gozzi, Jonas ^a   Olsson, A ^b   Lagerqvist, O ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^b Swedish Inst of Steel Construction   (Sweden)

Author keywords

Biaxial tests; Cross shaped specimen; High strength steel; Material behavior; Plasticity

Indexed keywords

ANISOTROPY; ELASTOPLASTICITY; FINITE ELEMENT METHOD; STRENGTH OF MATERIALS; STRESSES; YIELD STRESS;

BIAXIAL TESTS; CROSS SHAPED SPECIMEN; HIGH STRENGTH STEEL; MATERIAL BEHAVIOR;

STEEL;

HIGH STRENGTH STEEL;

EID: 28944454194     PISSN: 00144851     EISSN: None     Source Type: Journal    
DOI: 10.1177/0014485105059554     Document Type: Article

References (20)

1. Ikegami, K., "An Historical Perspective of the Experimental Study on Subsequent Yield Surface for Metals, Part l" Journal of the Society of Material Science, 24, 491-505 (1975).
2. Möller M., "Some Considerations on Structural Steel Plasticity," Licentiate thesis, 1993:27L, Luleå University of Technology, Luleå, Sweden (1993).
3. Ellyin, F., Xia, Z, and Sasaki, K., "Effect of Rate and Rate History on Plastic Deformation: Experiments and Constitutive Modeling," International Journal of Plasticity, 9, 951-959 (1993).
4. Ishikawa, H., "Subsequent Yield Surface Probed from its Current Center" International Journal of Plasticity, 13 (6-7), 533-549 (1997).
5. Shiratori, E., Ikegami, K., and Yoshida, F, "Analysis of Stress-strain Relations by Use of an Anisotropic Hardening Plastic Potential," Journal of the Mechanics and Physics of Solids, 27, 213-229 (1978).
6. Makinde, A., Thibodeau, L, and Neale, K. W, "Development of an Apparatus for Biaxial Testing Using Cruciform Specimens," EXPERIMENTAL MECHANICS, 32 (2),138-144 (1992).
7. Shiratori, E. and Ikegami, K., "A New Biaxial Tensile Testing Machine with Flat Specimen," Bulletin of the Tokyo Institute of Technology No 82, 105-118 (1967).
8. Shiratori, E. and Ikegami, K., "Experimental Study of the Subsequent Yield Surface by Using Cross-shaped Specimens," Journal of the Mechanics and Physics of Solids, 16, 373-394 (1968).
9. Kreißig, R. and Schindler J., "Some Experimental Results on Yield Condition in Plane Stress State," Acta Mechanica, 65, 169-179 (1986).
10. Green, D.E., Neale, K. W, MacEwen, S.R, Makinde, A., and Perrin, R., "Experimental Investigation of the Biaxial Behavior of an Aluminum Sheet," International Journal of Plasticity, 20, 1677-1706 (2004).
11. Boehler J. P., Demmerle, S., and Koss, S., "A New Direct Biaxial Testing Machine for Anisotropic Materials," EXPERIMENTAL MECHANICS, 34 (1),1-9 (1994).
12. Demmerle, S. and Boehler J.P., "Optimal Design of Biaxial Tensile Cruciform Specimens," Journal of the Mechanics and Physics of Solids, 41 (1), 143-181 (1993).
13. Granlund, J., "Biaxial Testing of Structural Steel with Cross-shaped Specimen," Proceedings of the Nordic Steel Construction Conference, Malmö, Sweden, June 19-21, Vol. 1, 49-56 (1995).
14. Granlund, J, "Structural Steel Plasticity - Experimental Study and Theoretical Modeling," Doctoral thesis, 1997:241), Luleå University of Technology, Luleå, ISRN: LTU-DT-97/24-SE (1997).
15. Olsson,A., "Stainless Steel Plasticity - Material Modeling and Structural Applications," Doctoral thesis, 2001:19D, Luleå University of Technology, Luleå, ISRN: LTU-DT-01/19-SE (2001).
16. Gozzi, J, "Plastic Behavior of Steel - Experimental Investigation and Modeling," Licentiate thesis, 2004:51L, Luleå University of Technology, Luleå, ISRN: LTU-LIC-04/51-SE (2004).
17. Albertini, C., Brusa, F, Del Grande, A., Mogilevski, M., Pizzinato, E. V, Quik, M., Schnabel, W., Crutzen, Y, Inzaghi, A., and Caravati, D., "Dynamic Uniaxial and Quasi-static Biaxial Tensile Properties of Aluminum Alloy AL-7108," Technical Note No. 1.96.148, Joint Research Center Ispra, Italy (1996).
18. Lademo, O. G., "Engineering Models of Elastoplasticity and Fracture for Aluminum Alloys," Doctoral Thesis, 1999:39, Norwegian University of Science and Technology, Trondheim, Norway (1999).
19. European Committee for Standardization, "Metallic Materials - Part 1 Method of Test at Ambient Temperature," EN10 002-1:2001 En, European Committee for Standardization, Brussels, Belgium (2001).
20. Rasmussen, K.J.R., Burns, T, Bezkorovainy, P., and Bambach, M.R., "Numerical Modeling of Stainless Steel Plates in Compression," Journal of Constructional Steel Research, 59, 1345-1362 (2003).