Review of the applicability of FSW processing to aircraft applications

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 4, Issue , 2005, Pages 2483-2500

  Kumar, Brijesh ^a,b   Widener, Christian ^c   Jahn, Adam ^c   Tweedy, Bryan ^c   Cope, Dale ^c   Lee, Ryan ^c  

^a WICHITA STATE UNIVERSITY   (United States)

^b Composites and Advanced Materials Lab ^*  (United States)

^c Advanced Joining Technology Lab   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AVIATION; PROCESS CONTROL; QUALITY CONTROL; WELDING;

AEROSPACE ALLOYS; FRICTION STIR WELDING (FSW); WELDING PARAMETERS;

AIRCRAFT;

EID: 28944432675     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2005-2000     Document Type: Conference Paper

References (76)

1. Cederqvist, L. and Reynolds, A.P., "Properties of friction stir welded aluminium lap joints," 2nd International Symposium on FSW, 2000.
2. Thompson J, "FSW for cost savings in contract manufacturing," 2nd International Symposium on FSW, 2000.
3. Strangwood, M., Berry, J.E., Cleugh, D.M., Leonard A.J. and Threadgill, P.L., "Characterisation of the thermo-mechanical effects on microstructural development in friction stir welded age hardening aluminium based alloys," 1st International Symposium on FSW, 1999.
4. Frigaard, Ø.G., Hjelen, H., Gulbrandsen-Dahl, S. and Midling, O.T., "Characterisation of the subgrain structure in friction stir welded aluminium alloys using the SEM-EBSD technique," 1st International Symposium on FSW, 1999.
5. Russell, MI and Shercliff, H.R., "Analytical modelling of microstructure development in friction stir welding," 1st International Symposium on FSW, 1999.
6. Biallas, G., Braun, R., Dalle Donne, C., Staniek, G. and Kaysser, W.A., "Mechanical properties and corrosion behaviour of friction stir welded 2024-T3," 1st International Symposium on FSW, 1999.
7. von Strombeck, A., Dos Santos, J.F., Torster, F. and Koçak, M., "Fracture toughness behaviour of FSW joints in aluminium alloys," 1st International Symposium on FSW, 1999.
8. Kumagai, M. and Tanaka, S., "Properties of aluminium wide panels by friction stir welding," 1st International Symposium on FSW, 1999.
9. Svensson, L.E. and Karlsson, L., "Microstructure, hardness and fracture in friction stir welded AA6082," 1st International Symposium on FSW, 1999.
10. Seetharaman, V., Jata, K.V. and Semiatin, S.L., "Plastic flow and microstructure development during high temperature deformation of a friction stir welded 7075 aluminium alloy," 2nd International Symposium on FSW, 2000.
11. Larsson, H., Karlsson, L., Stoltz, S. and Bergqvist, E.L., "Joining of dissimilar Al alloys by friction stir welding," 2nd International Symposium on FSW, 2000.
12. Kallman, L. and Magnusson, L., "Mechanical properties of friction stir welds in thin sheet of aluminium 2024, 6013 and 7475," 2nd International Symposium on FSW, 2000.
13. Dawes, M.G., Karger, S.A., Dickerson, T.L. and Przydatek, J., "Strength and fracture toughness of friction stir welds in aluminium alloys," 2nd International Symposium on FSW, 2000.
14. Norman, A.F., "The effect of welding conditions on the microstructure & mechanical properties of the nugget zone in AA7010 alloy friction stir welds," 3rd International Symposium on FSW, 2001.
15. Karlsen, M., "Characterisation of the deformation microstructure in friction stir welded 7075-T6 aluminium alloy using the SEM-EBSD technique," 3rd International Symposium on FSW, 2001.
16. Mahoney, M., "High strain rate superplasticity in thick section 7050 aluminum created by friction stir processing," 3rd International Symposium on FSW, 2001.
17. Hassan, A.A., Wynne, B.P., Prangnell, P.B., "The simulation of nugget zone grain structures in high strength Al-alloy friction stir welds by high strain torsion testing," 4th International Symposium on FSW, 2003.
18. Allehaux, D., Petit, G., Campagnac, M.H., Lapasset, G. and Denquin, A., "Microstructure and properties of a friction stir welded 7349-T6 aluminium alloy," 4th International Symposium on FSW, 2003.
19. Lindner, K., Khandkar, Z., Khan, J., Tang, W., and Reynolds, A.P., "Rationalization of hardness distributions in alloy 7050 friction stir welds based on weld energy, weld power, and time/temperature history," 4th International Symposium on FSW, 2003.
20. Lee, W.B., Yeon, Y.M., Jung, S.B., "The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials," Scripta Materialia, Sept 2003, Vol. 49, No. 5, pp. 423-428.
21. Field, D.P., Nelson, T.W., Hovanski, Y., Jata, K.V., "Heterogeneity of crystallographic texture in friction stir welds of aluminum," Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Nov 2001, Vol. 32, No. 11, pp. 2869-2877.
22. Sato, Y.S., Park, S.H.C., Kokawa, H., "Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys," Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Dec 2001, Vol. 32A, No. 12, pp. 3033-3042.
23. Benavides, S., Li, Y., Murr, L.E., Brown, D., McClure, J.C., "Low-temperature friction-stir welding of 2024 aluminum," Scripta Materialia, Sept 1999 , Vol. 41, No. 8, pp. 809-815.
24. Rhodes, C.G., Mahoney, M.W., Bingel, W.H., Spurling, R.A., Bampton, C.C., "Effect of friction stir welding on microstructure of 7075 aluminum," Scripta Materialia, Jan 1, 1997, Vol. 36, No. 1, pp. 69-75.
25. Jata, K.V., Sankaran, K.K., Ruschau, J.J., "Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451," Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Sept 2000, Vol. 31, No. 9, pp. 2181-2192.
26. Jata,-K.-V., Semiatin,-S.-L, "Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys," Scripta-Materialia, 29 Sept 2000 , Vol. 43, No. 8, pp. 743-749.
27. Sato, Yutaka S., Kokawa, Hiroyuki, "Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum," Metallurgical and Materials Transactions. Part A, Physical Metallurgy and Materials Science, Dec. 2001, Vol. 32A, No. 12, pp. 3023-31.
28. Paglia, C.S., Ungaro, L.M., Pitts, B.C., "The Corrosion and Environmentally Assisted Cracking Behavior of High Strength Aluminum Alloys Friction Stir Welds: 7075-T651 vs. 7050-T7451," TMS Annual Meeting, 2003, pp. 65-75.
29. Bussu, G. and Irving, P.E., "Fatigue performance of friction stir welded 2024-T351 aluminum joints," 1st International Symposium on FSW, 1999.
30. James, M., Mahoney, M.W. and Waldron, D.J., "Residual stress measurements in friction stir welded aluminium alloys," 1st International Symposium on FSW, 1999.
31. Dalle Donne, C., Biallas, G., Ghindini, T. and Raimbeaux, G., "Effect of weld imperfections and residual stresses on the fatigue crack propagation in friction stir welded joints," 2nd International Symposium on FSW, 2000.
32. Lohwasser, D., "Application of friction stir welding for aircraft industry," 2nd International Symposium on FSW, 2000.
33. Talwar, R., Bolser,. D., Lederich, R.J. and Baumann, J., "Friction stir welding of airframe structures," 2nd International Symposium on FSW, 2000.
34. Zhang, J.Z., Pedwell, R. and Davies, H., "On The comparison of the fatigue behaviour between friction stir welded and non-friction stir welded structures," 2nd International Symposium on FSW, 2000.
35. Djapic-Oosterkamp, L., Ivankovic, A., & Oosterkamp, A., "Initiation fracture toughness of friction stir welds in commercial aluminium alloys under rapid loading," 2nd International Symposium on FSW, 2000.
36. Aota, K., "Heat inputs and mechanical properties in friction stir welding," 3rd International Symposium on FSW, 2001.
37. Lohwasser, D., "Welding of airframes by friction stir," 3rd International Symposium on FSW, 2001.
38. Liu, H.J., Fujii, H., Maeda, M., Nogil, K., "Comparative study on fracture locations of friction stir welded joints for different types of aluminium alloys," 4th International Symposium on FSW, 2003.
39. Nerman, P., Andersson, J., "Fatigue strength of mixed Al joints performed with FSW," 4th International Symposium on FSW, 2003.
40. Mahoney, M.W., Rhodes, C.G., Flintoff, J.G., Spurling, R.A. and Bingel, W.H., "Properties of friction-stir-welded 7075 T651 aluminum," Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Jul 1998, Vol. 29A, No. 7, pp. 1955-1964.
41. Dunlavy, M. and Jata, K.V., "High-cycle corrosion fatigue of friction stir welded 7050-T7451," TMS Annual Meeting, 2003, pp. 91-98.
42. Tang, Wei and Reynolds, A.P, "Alloy, tool geometry, and process parameter effects on friction stir weld energies and resultant FSW joint properties," Friction Stir Welding and Processing, 2001, pp. 15-23.
43. Reynolds, A.P., Lockwood, W.D. and Seidel, T.U., "Processing- property correlation in friction stir welds," Materials Science Forum, 2000, Vol. 331-337, No. 2, pp. 1719-1724.
44. John, Reji and Jata, K. V, "Residual stress effects on near-threshold fatigue crack growth in friction stir welds," Friction Stir Welding and Processing, 2001, pp. 57-69.
45. Cederqvist, L. and Reynolds, A.P., "Factors affecting the properties of friction stir welded aluminum lap joints," Welding Journal (Miami, Fla), Dec 2001, Vol. 80, No. 12, pp. 281/s-287/s.
46. Paglia, C.S., Carroll, M.C., Pitts, B.C., Reynolds, T. and Buchheit, R.G., "Strength, corrosion, and environmentally assisted cracking of a 7075-T6 friction stir weld," Materials Science Forum, 2002, Vol. 396-402, No. 3, pp. 1677-1684.
47. Sutton, M. A., Reynolds, A. P. and Wang, D.Q., "A study of residual stresses and nucrostructure in 2024-T3 aluminum friction stir butt welds," Journal of Engineering Materials and Technology, April 2002, Vol. 124, No. 2, pp. 215-21.
48. Leonard, A.J., "Corrosion resistance of FSWs in aluminium alloys 2014A-T651 and 7075-T651," 2nd International Symposium on FSW, 2000.
49. Hannour, F., "Corrosion behaviour of laser treated friction stir welds in high strength aluminium alloys," 3rd International Symposium on FSW, 2001.
50. Lumsden III, J., Mahoney, M., Pollock, G., Waldron D. & Guinasso, A., "Stress corrosion susceptibility in 7075 T7541 aluminum following friction stir welding," 1st International Symposium on FSW, 1999.
51. Hannour, F., Davenport, A. and Strangwood, M., "Corrosion of friction stir welds in high strength aluminium alloys," 2nd International Symposium on FSW, 2000.
52. Field, D.P., Nelson, T.W., Hovanski, Y. and Bahr, D.F., "Texture effects on corrosion behavior of friction stir welded 7075 aluminum," Friction Stir Welding and Processing, 2001, pp. 83-91.
53. Hashimoto, T., Jyogan, S., Nakata, K., Kin, Y.G. and Ushio, M., "FSW Joints of High Strength Aluminium Alloy," 1st International Symposium on FSW, 1999.
54. Thomas, W.M., "Friction stir welding - Recent developments," Materials Science Forum, 2003, Vol. 426-432, No. 1, pp. 229-236.
55. Bhat, B.N., Carter, R.W., Ding, R.J., Lawless, K.G., Nunes Jr., A.C., Russell, C.K. and Shah, S.R., "Friction stir welding development at NASA - Marshall Space Flight Center," Friction Stir Welding and Processing, 2001, pp. 117-128.
56. Skinner, M., Edwards, R.L., Adams, G., Li, Z., "Improvements to the FSW process using the self reacting technology," 4th International Symposium on FSW, 2003.
57. Colligan, K., "Material flow behavior during friction stir welding of aluminum," Welding Journal, Jul 1999, Vol. 78, No. 7, pp. 229S-237S.
58. Colligan, K., "Dynamic Material Deformation During Friction Stir Welding of Aluminum,"
59. Dong, P., Lu, F., Hong, J.K. and Cao, Z., "Analysis of weld formation process in friction stir welding," 1st International Symposium on FSW, 1999.
60. North, T.H., Bendzsak, G.J. and Smith, C.B., "Material properties relevant to 3-D FSW modeling," 2nd International Symposium on FSW, 2000.
61. Colegrove, P., Painter, M., Graham, D. and Miller, T., "3-dimensional flow and thermal modelling of the friction stir welding process," 2nd International Symposium on FSW, 2000.
62. Bendzsak, G.J., North, T.H. and Smith, C.B., "An experimentally validated 3D model for friction stir welding," 2nd International Symposium on FSW, 2000.
63. Chen, C. and Kovacevic, R., "Finite element modelling of thermomechanical performance of friction stir welding," 4th International Symposium on FSW, 2003.
64. Shi, Q.Y., Dickerson, T.L. and Shercliff, H.R., "Thermomechanical FE modelling of friction stir welding of A1-2024 including tool loads," 4th International Symposium on FSW, 2003.
65. Li, Ying, Murr, L.E. and McClure, J.C., "Solid-state flow visualization in the friction-stir welding of 2024 A1 to 6061 Al," Scripta Materialia, Apr 1999 , Vol. 40, No. 9, pp. 1041-1046.
66. Ulysse, P., "Three-dimensional modeling of the friction stir-welding process," International Journal of Machine Tools and Manufacture, Nov 2002 , Vol. 42, No. 14, pp. 1549-1557.
67. Chao, Yuh J., Qi, X. and Tang, W., "Heat Transfer in Friction Stir Welding-Experimental and Numerical Studies," Journal of Manufacturing Science and Engineering, Feb 2003 , Vol. 125, No. 1, pp. 138-45.
68. Bird, C., "Ultrasonic phased array inspection technology for the evaluation of friction stir welds,"
69. Jandric, D., Chen, C., Valant and M., Kovacevic, R., " Characterization of weld quality by different sensing techniques in friction stir welding of lap joints," 4th International Symposium on FSW, 2003.
70. Erbsloh, K., Dalle Donne, C. and Lohwasser, D., "Friction stir welding of T-joints," Materials Science Forum, 2003, Vol. 426-432, No. 4, pp. 2965-2970.
71. Lohwasser, D., "Friction Stir Welding of Aerospace Alloys," 4th International Symposium on FSW, 2003.
72. Marie, F., "Development of friction stir welding of 7000 series extrusions for central wing box applications," 3rd International Symposium on FSW, 2001.
73. Talwar, R., Lederich, R., Bolser, D., Garcia, A., "An innovative, low cost friction stir welded cargo handling solution for the C-17 Globemaster ni for reducing manufacturing cost and logistics support," 4th International Symposium on FSW, 2003.
74. Christner, B., McCoury, J. and Higgins, S., "Development and testing of friction stir welding as a joining method for primary aircraft structure," 4th International Symposium on FSW, 2003.
75. Shepherd, G., "The evaluation of friction stir welded joints on airbus aircraft wing structure," 4th International Symposium on FSW, 2003.
76. Christner, B., Hansen, M., Skinner, M. and Sylva, G., "Friction stir welding system development for thin gauge aerospace structures," 4th International Symposium on FSW, 2003.