Correlation between the macroscopic behavior and the microstructural evolutions during large plastic deformation of a dual-phase steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 11, 2005, Pages 2937-2945

  Gardey, B ^a   Bouvier, S ^a   Bacroix, B ^a  

^a UNIVERSITÉ PARIS 13   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE; PLASTIC DEFORMATION; STEEL ANALYSIS; STRAIN; TEXTURES; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

DUAL-PHASE STEEL; MACROSCOPIC BEHAVIOR; MICROSTRUCTURAL EVOLUTIONS; SINGLE-PHASE MATERIAL;

STEEL;

EID: 28444466246     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0067-6     Document Type: Article

References (34)

1. E.V. Nesterova, B. Bacroix, and C. Teodosiu: Metall. Trans. A, 2001, vol. 32A, pp. 2527-38.
2. E.F. Rauch and C. G'Sell: Mater. Sci. Eng., 1989, vol. A111, pp. 71-80.
3. E.F. Rauch and J.-H. Schmitt: Mater. Sci. Eng. A, 1989, vol. 113, pp. 441-48.
4. B. Bacroix, P. Genevois, and C. Teodosiu: Eur. J. Mech. A/Solids, 1994, vol. 13 (5), pp. 661-75.
5. A.B. Lopes, E.F. Rauch, and J.J. Gracio: Acta Mater., 1999, vol. 47 (3), pp. 859-66.
6. A. Goel, R.K. Ray, and G.S. Murty: Scripta Metall., 1983, vol. 17 (3), pp. 375-80.
7. D.A. Korzekwa, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1984, vol. 15A, pp. 1221-28.
8. A.M. Sarosiek and W.S. Owen: Mater. Sci. Eng., 1984, vol. 66, pp. 13-34.
9. A. Bayram, A. Uguz, and M. Ula: Mater. Characterization, 1999, vol. 43 (4), pp. 259-69.
10. M.H. Saleh and R. Priestner: J. Mater. Processing Technol., 2001, vol. 113 (1-3), pp. 587-93.
11. A. El-Sesy and Z.M. El-Baradie: Mater. Lett., 2002, vol. 57 (30), pp. 580-85.
12. X.-L. Cai, A.J. Feng, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 1405-15.
13. X.-L. Cai, A.J. Garratt-Reed, and W.S. Owen: Metall. Trans. A, 1985, vol. 16A, pp. 543-57.
14. G.R. Speich, A.J. Schwoeble, and G.P. Huffman: Metall. Trans. A, 1983, vol. 14A, pp. 1079-87.
15. K. Jena and M.C. Chaturvedi: Mater. Sci. Eng., 1988, vol. 100, pp. 1-6.
16. A. Bhattacharyya, T. Sakaki, and G.J. Weng: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 301-14.
17. S. Kim and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1753-60.
18. R.-K. Ray: Mater. Sci. Eng., 1986, vol 77, pp. 169-74.
19. 3DS Report: "18-Month LPMTM-Progress Report, Digital Die Design Systems," IMS1999000051 contract, LPMTM-CNRS, University Paris 13, France, 2001.
20. B. Bacroix and Z. Hu: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 601-13.
21. V. Richard, T. Chauveau, and W. Swiatnicki: Internal Report, LPMTM-CNRS, University Paris 13, France, 2000.
22. Z. Hu, E.F. Rauch, and C. Teodosiu: Int. J. Plasticity, 1992, vol. 8, pp. 839-56.
23. G. Vincze, E.F. Rauch, J.J. Gracio, F. Barlat, and A.B. Lopes: Acta Mater., 2005, vol. 53, pp. 1005-13.
24. D. Boscher: Ph.D. Thesis, University Paris 13, France, 2004.
25. P. van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plas., 2005, vol. 21 (3), pp. 589-624.
26. G. Winther, X. Huang, and N. Hansen: Acta Mater., 2000, vol. 48, pp. 2187-98.
27. B. Bacroix, E.V. Nesterova, and C. Teodosiu: Proc. Int. Conf. Plasticity 2002, A.S. Khan and O. Lopez-Pamies, eds., Neat Press et Fulton, Aruba, 2002, pp. 292-94.
28. A. Haldar, X. Huang, T. Leffers, N. Hansen, and R.K. Ray: Acta Mater., 2004, vol. 52, pp. 5405-18.
29. B. Peeters, B. Bacroix, C. Teodosiu, P. van Houtte, and E. Aernoudt: Acta Mater., 2001, vol. 49 (9), pp. 1621-32.
30. R. Brenner, R. Masson, O. Castelnau, and A. Zaoui: Eur. J. Mech.-A/ Solids, 2002, vol. 21 (6), pp. 943-60.
31. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter: Int J. Plas., 2000, vol. 16 (7-8), pp. 723-48.
32. T. Iwamoto: Int. J. Plas., 2004, vol. 20, pp. 841-69.
33. B. Gardey, S. Bouvier, V. Richard, and B. Bacroix: Mater. Sci. Eng. A, 2005, 400-401, pp. 136-41.
34. E. Nesterova: Internal Report, LPMTM-CNRS, University Paris 13, France, 2002.