Determination of thermal properties of some supplementary cementing materials used in cement and concrete

Construction and Building Materials

Volumn 20, Issue 3, 2006, Pages 193-198

  Krishnaiah, S ^a   Singh, D N ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

Author keywords

Cementing materials; Thermal properties; Thermal property detector

Indexed keywords

BLAST FURNACES; CONCRETES; DIFFERENTIAL SCANNING CALORIMETRY; FLY ASH; GRANULAR MATERIALS; LASER APPLICATIONS; SILICA; SLAGS; SPECIFIC HEAT; THERMAL DIFFUSION; THERMODYNAMIC PROPERTIES;

CEMENTING MATERIALS; LASER FLASH METHOD; SILICA FUME; THERMAL PROPERTY DETECTORS;

CEMENTS;

EID: 28444450411     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2004.10.001     Document Type: Article

References (36)

1. Fukudome K, Shintani N, Saitoh T, Kita T, Sasaki H. Utilisation of coal ash produced from pressurized fluidized bed combustion power plant as concrete mineral admixture. In: Malhotra VM, editor. Proceedings of the 6th CANMET/ACI international conference on fly ash, silica fume, slag and natural pozzolans concrete, Bangkok, Thailand vol. 2; 1998. p. 528-544.
2. Mehta PK. Pozzolanic and cementitious by products and mineral admixtures for concrete - a critical review. In: Malhotra VM, editor. ACI Pub vol. SP-79-1, No. 1; 1983; p. 1-46.
3. Satarin VI. Slag portland cement. In: The proceedings of the sixth internatinal congress of Chem. Cem. (VI ICCC), Moscow; 1974. p. 1-51.
4. M.H. Shehata, and M.D.A. Thomas The effect of fly ash composition on the expansion of concrete due to alkali-silica reaction Cement Concrete Res 30 7 2000 1063 1072
5. P.J. Tikalsky, and R.L. Carrasquillo Fly ash evaluation and selection for use in sulphate-resistant concrete ACI Mater J 1993
6. G.J. Osborne Determination of sulphate resistance of blast furnace slag cement using small scale accelerated methods of tests Adv Cem Res 2 1989 21 27
7. R.S. Gollop, and H.F.W. Taylor Microstructural and microanalytical studies of sulfate attack-part 5: comparison of different slag blends Cement Concrete Res 29 7 1999 975 982
8. Frearson JPH. Sulphate resistance of combination of Portland cement and ground granulated blast furnace slag. In: Proceedings of the 2nd International Congres of fly ash, silica fume, slag and natural pozzolans in concrete. Madrid: ACI Pub vol. 91, No. 2; 1986. p. 1495-524.
9. Li C, Yoda A, Yokomuro T. Pore structure, strength and carbonation of cement pastes containing ground granulated blast furnace slag. In: Malhotra, VM, editor. In: Proceedings of the 6th CANMET/ACI international conference on fly ash, silica fume, slag and natural pozzolans in concrete, Bangkok, Thailand. vol. 2; 1998. p. 875-891.
10. H.G. Smolczyk Effect of the chemistry of the slag on the strength of blast furnace slags Zement-Kalk-Gips 31 1978 294 296
11. Nagataki S, Ohga H, Inoue T. Evaluation of fly ash for controlling alkali-aggregate reaction, In: Malhotra VM, editor. In: Proceedings of the 2nd CANMET/ACI international conference on the durability of concrete. Montreal, PQ: ACI Pub. vol. SP 126-51, No. 2; 1991. p. 955-972.
12. Shintani N, Saitou T, Sasaki H, Kita T. Mineralogical and chemical properties of mortars incorporating coal ash produced by fluidized bed combustion. In: Malhotra VM, editor. In: Proceedings of the 6th CANMET/ACI international conference on fly ash, silica fume, slag and natural pozzolans Concrete, Bangkok, Thailand. vol. SP178-25, No. 1;1998. p. 431-48.
13. E.T. Turkdogan Physicochemical properties of molten slags and glasses 1983 The Metals Society London
14. R.N. Swamy Fly ash and slag: standards and specifications-help or hindrance J Mater Struct 26 1993 600 613
15. Stanton KT, Towler MR, Mooney P, Hill RG, Querol X. Thermal analysis of fly ahses sourced from European non-blended coals. In: PROGRES workshop on novel products from combustion residues, Morella, Spain; 2001. p. 431-40.
16. N.V. Russell, T.J. Beeley, C.K. Man, J.R. Gibbins, and J. Williamson Development of TG measurements of intrinsic char combustion reactivity for industrial and research purposes Fuel Process Technol 57 2 1998 113 130
17. X. Fu, and D.D.L. Chung Effects of silica fume, latex, methylcellulose, and carbon fibres on the thermal conductivity and specific heat of cement paste Cement Concrete Res 27 12 1997 1799 1804
18. Y. Xu, and D.D.L. Chung Increasing the specific heat of cement paste admixture surface treatments Cement Concrete Res 29 7 1999 1117 1121
19. Y. Xu, and D.D.L. Chung Effect of sand addition on the specific heat and thermal conductivity of cement Cement Concrete Res 30 1 2000 59 61
20. Y. Xu, and D.D.L. Chung Cement of high specific heat and high thermal conductivity obtained by using silane and silica fume as admixture Cement Concrete Res 30 7 2000 1175 1178
21. B. Borst, and P. Krijgsman Hydrothermal synthesis of light-weight insulating material using fly ash J.J.J.R. Goumans H.A. Van der Sloot T.G. Aalbers Waste materials in construction 1991 Elsevier 659 662
22. Strabala WM. Structural products manufactured from fly ash, Patent US5534058 A9; 1996.
23. R. Janardhanam, F. Burns, and R.D. Peindl Mix design for flowable fly-ash backfill material J Mater Civil Eng, ASCE 4 3 1992 252 263
24. P.K. Kolay, and D.N. Singh Application of coal ash in fluidized thermal beds J Mater Civil Eng, ASCE 14 5 2002 441 444
25. H.S. Radhakrishna, F.Y. Chu, and S.A. Boggs Thermal instability and its prediction in cable backfill soils IEEE Trans Power Apparatus Sys PAS-99 3 1980 856 867
26. F.C. Hooper, and F.R. Lepper Transient heat flow apparatus for the determination of thermal conductivities J Am Soc Heat Ventilating Eng 1950 129 140
27. M.V.B.B. Gangadhara Rao, P.K. Kolay, and D.N. Singh Thermal characteristics of a class F fly ash Cement Concrete Res 28 6 1998 841 846
28. J.K. Mitchell, and T.C. Kao Measurement of soil thermal resistivity J Geotech Eng Div: ASCE 104 10 1978 1307 1320
29. ASTM D 854-92. Test method for specific gravity of soils. Annual book of ASTM standards, vol. 04.08. Philadelphia, USA: ASTM; 1994. p. 80-83.
30. ASTM C 204-84. Fineness of Portland cement by air permeability apparatus, Annual book of ASTM standards, vol. 04.01. Philadelphia, USA: ASTM; 1984. p. 56-162.
31. ASTM C 1251-93. Determination of specific surface area by gas adsorption, Annual book of ASTM standards, vol. 15.01. Philadelphia, USA: ASTM; 1994. p. 389-90.
32. ASTM D 422-63. Test method for particle size analysis of soils, Annual book of ASTM standards, vol. 04.08. Philadelphia, USA: ASTM; 1994. p. 10-16.
33. GmbH. Soft imaging software, Version 2.1. Wetzlar Germany: Ernst Leitz GmbH; 1995.
34. JCPDS. Powder diffraction file, 44, 7354-CD ROM (PDF 1- 44). Pensylvania, USA: International Centre for Diffraction Data; 1994.
35. G.A.l. Nakshabandi, and H. Kohnke Thermal conductivity and diffusivity of soils as related to moisture tension and other physical properties Agr Meteorol 2 1965 271 279
36. F.E. Kolyasev, and A.I. Gupalo On the correlation of heat and moisture properties of soils Highway Res Board Special Rep 40 1958 106 112