Kinetic analysis of thermal degradation of recycled polycarbonate/ acrylonitrile-butadiene-styrene mixtures from waste electric and electronic equipment

Polymer Degradation and Stability

Volumn 91, Issue 3, 2006, Pages 527-534

  Balart, R ^a   Sanchez L ^a   Lopez J ^a   Jimenez A ^b  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b UNIVERSITY OF ALICANTE   (Spain)

Author keywords

ABS; Kinetic parameters; Polycarbonate; Thermal properties; Thermogravimetric analysis

Indexed keywords

ABS RESINS; ELASTOMERS; PYROLYSIS; RECYCLING; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS;

KINETIC ANALYSIS; KINETIC PARAMETERS;

POLYCARBONATES;

EID: 28244499273     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2005.01.055     Document Type: Conference Paper

References (31)

1. Silicon valley toxic coalition Just say no to e-waste: background document on hazards and waste from computers
2. Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
3. Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).
4. W. Jiang, and S.C. Tjong Thermal stability of polycarbonate composites reinforced with potassium titanate whiskers: effect of coupling agents addition Polym Degrad Stab 66 1999 241 246
5. J. Cui, and E. Forssberg Mechanical recycling of waste electric and electronic equipment: a review J Hazard Mater 99 2003 243 263
6. T. Matsuto, C.H. Jung, and N. Tanaka Material and heavy metal balance in a recycling facility for home electrical appliances Waste Manag 24 2004 425 436
7. M. Evstatiev, S. Fakirov, B. Krasteva, J. Friedrich, J.A. Covas, and M. Cunha Recycling of poly(ethylene terephthalate) as polymer-polymer composites Polym Eng Sci 42 2002 826 835
8. G. Villalba, M. Segarra, A.I. Fernández, J.M. Chimenos, and F. Espiell A proposal for quantifying the recyclability of materials Resour Conserv Recycling 37 2002 39 53
9. H. Shen, E. Forssberg, and R.J. Pugh Selective flotation separation of plastics by particle control Resour Conserv Recycling 33 2001 37 50
10. G. Pappa, C. Boukouvalas, C. Giannaris, N. Ntaras, V. Zografos, and K. Magoulas The selective dissolution/precipitation technique for polymer recycling: a pilot unit application Resour Conserv Recycling 34 2001 33 44
11. J.G. Poulakis, and C.D. Papaspyrides Recycling of polypropylene by the dissolution/reprecipitation technique 1. A model study Resour Conserv Recycling 20 1997 31 41
12. M. Brebu, T. Bhaskar, K. Murai, A. Muto, Sakata, and M.D. Azhar-Uddin The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene- styrene (ABS) copolymer Chemosphere 56 2004 433 440
13. I.C. McNeill, and S. Basan Thermal degradation of polycarbonates: reaction conditions and reaction mechanisms Polym Degrad Stab 39 1993 13 19
14. L. Becker, D. Lenoir, G. Matuschek, and A. Kettrup Thermal degradation of halogen-free flame retardant epoxides and polycarbonate in air J Anal Appl Pyrolysis 60 2001 55 67
15. J. Katajisto, T.T. Pakkanen, T.A. Pakkanen, and P. Hirva Ab-initio study on thermal degradation reactions of polycarbonate J Mol Struct (Theochem) 634 2003 305 310
16. G. Montaudo, S. Carroccio, and C. Puglisi Thermal and thermoxidative degradation processes in poly(bisphenol-A carbonate) J Anal Appl Pyrolysis 64 2002 229 247
17. G. Montaudo, S. Carroccio, and C. Puglisi Thermal oxidation of poly(bisphenol-A polycarbonate) investigated by SEC/MALDI Polym Degrad Stab 77 2002 137 146
18. B.N. Jang, and C.A. Wilkie A TGA/FTIR and mass spectral study on the thermal degradation of bisphenol A polycarbonate Polym Degrad Stab 86 2004 419 430
19. D. Donga, S. Tasaka, S. Aikawa, S. Kamiya, N. Inagaki, and Y. Inoue Thermal degradation of acrylonitrile-butadiene-styrene terpolymer in bean oil Polym Degrad Stab 73 2001 319 326
20. B.E. Tiganis, L.S. Burn, P. Davis, and A.J. Hill Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends Polym Degrad Stab 76 2002 425 434
21. R. Zong, Y. Hu, S. Wang, and L. Song Thermogravimetric evaluation of PC/ABS/montmorillonite nanocomposites Polym Degrad Stab 83 2004 423 428
22. A. Jiménez, L. Torre, and J.M. Kenny Thermal degradation of poly(vinyl chloride) plastisols based on low-migration polymeric plasticizers Polym Degrad Stab 73 2001 447 453
23. R. Navarro, L. Torre, J.M. Kenny, and A. Jiménez Thermal degradation of recycled polypropylene toughened with elastomers Polym Degrad Stab 82 2003 279 290
24. W.Y. Chiang, and D.S. Hwung Properties of polycarbonate/acrylonitrile- butadiene-styrene blends Polym Eng Sci 27 1987 632 639
25. M.P. Luda di Cortemiglia, G. Camino, I. Costa, and M. Guaita Thermal degradation of ABS Thermochim Acta 93 1985 187 190
26. M. Suzuki, and C.A. Wilkie The thermal degradation of acrylonitrile-butadiene-styrene terpolymer as studied by TGA/FTIR Polym Degrad Stab 47 1995 217 221
27. G. Wildes, H. Keskkula, and D.R. Paul Fracture characterization of PC/ABS blends: effect of reactive compatibilization, ABS type and rubber concentration Polymer 40 1999 7089 7107
28. J.P.F. Inberg, and R.J. Gaymans Co-continuous polycarbonate/ABS blends Polymer 43 2002 2425 2434
29. F. Elmaghor, L. Zhang, R. Fan, and H. Li Recycling of polycarbonate by blending with maleic anhydride grafted ABS Polymer 45 2004 6719 6724
30. M.V. Motyakin, and S. Schlick Thermal degradation at 390 K of poly(acrylonitrile-butadyene-styrene) (ABS) containing a hindered amine stabilizer: a study by ID and 2D Electron Spin Resonance Imaging (ESRI) and ATR-FTIR Polym Degrad Stab 76 2002 25 36
31. A. Boldizar, and K. Möller Degradation of ABS during repeated processing and accelerated ageing Polym Degrad Stab 81 2003 359 366