Effects of surface-roughness geometry on separation-bubble transition

Proceedings of the ASME Turbo Expo

Volumn 3 PART B, Issue , 2005, Pages 1039-1047

  Roberts, Stephen K ^a   Yaras, Metin I ^a  

^a CARLETON UNIVERSITY   (Canada)

Author keywords

Separation bubble transition; Surface roughness

Indexed keywords

ROUGHNESS PATTERNS; SEPARATION-BUBBLE TRANSITION; STABILITY MECHANISMS; TURBINE BLADES;

STABILITY; SURFACE ROUGHNESS; TURBINES; TURBOMACHINE BLADES;

BUBBLES (IN FLUIDS);

EID: 27744547844     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2005-68664     Document Type: Conference Paper

References (44)

1. Leipold, R., Boese, M., and Fottner, L., 2000. "The Influence of Technical Surface Roughness Caused by Precision Forging on the Flow Around a Highly Loaded Compressor Cascade," ASME J. Turbomach., 122, pp. 416-425.
2. Bons, J. P., and McClain, S. T., 2003, "The Effect of Real Turbine Roughness with Pressure Gradient on Heat Transfer," ASME J. Turbomach., 126, pp. 333-441.
3. Bons, J. P., McClain, S. T., Taylor, R. P., and Rivir, R. B.. 2001, "The Many Faces of Turbine Surface Roughness," ASME J. Turbomach., 123, pp. 739-748.
4. Taylor, R. P., 1990. "Surface Roughness Measurements on Gas Turbine Blades," ASME J. Turbomach., 112, pp. 175-180.
5. Kind, R. J., Serjak, P. J., and Abbott, M. W. P., 1998, "Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade," ASME J. Turbomach., 120, pp. 20-27.
6. Boynton, J. L., Tabibzadeh, R., and Hudson, S. T., 1992, "Investigation of Rotor Blade Roughness Effects on Turbine Performance," ASME J. Turbomach., 115, pp. 614-620.
7. Suder, K. L., Chima, R. V., J., S. A., and Roberts, W. B., 1995, "The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor," ASME J. Turbomach., 117, pp. 491-505.
8. Blair, M. F., 1994, "An Experimental Study of Heat Transfer in a Large Scale Turbine Rotor Passage," ASME J. Turbomach., 116, pp. 1-13.
9. Pinson, M. W., and Wang, T., 1997, "Effects of Leading-edge Roughness on Fluid Flow and Heat Transfer in the Transitional Boundary Layer over a Flat Plate," Int. J. Heat & Mass Transfer, 40, pp. 2813-2823.
10. Wang, T., and Rice, M. C., 2003, "Effect of Elevated Free-Stream Turbulence on Transitional Heat Transfer over Dual-Scaled Rough Surfaces," ASME GT2003-38835.
11. Gibbings, J. C., Goksel, O. T., and Hall. D. J., 1986, "The Influence of Roughness Trips Upon Boundary-layer Transition - Part 1 Characterstics of Wire Trips," Aeronaut J., 90, pp. 289-301.
12. Gibbings, J. C.. Goksel, O. T., and Hall, D. J., 1986, "The Influence of Roughness Trips upon Boundary-layer Transition - Part 2 Characteristics of Single Spherical Trips," Aeronaut. J., 90, pp. 357-367.
13. Gibbings, J. C., Goksel, O. T., and Hall, D. J., 1986, "The Influence of Roughness Trips upon Boundary-layer Transition - Part 3 Characteristics of Rows of Spherical Transition Strips," Aeronaut. J., 90, pp. 393-398.
14. Klebanoff, P. S., and Tidstrom, K. D., 1982, "Mechanism by Which a Two-Dimensional Roughness Element Induces Boundary-Layer Transition," Phys. Fluids, 15, pp. 1173-1188.
15. Gibbings, J. C., and Al-Shukri, S. M., 1997, "Effect of Sandpaper Roughness and Stream Turbulence on the Laminar Layer and its Transition," Aeronaut, J., 101, pp. 17-24.
16. Kerho, M. F., and Bragg, M. B., 1997, "Airfoil Boundary-Layer Development and Transition with Large Leading-Edge Roughness," AIAA J., 35, pp. 75-84.
17. Roberts, S. K., and Yaras, M. I., "Boundary Layer Transition Affected by Surface Roughness and Free-Stream Turbulence," ASME GT2004-53668, (Accepted for: ASME J. Fluids Eng.).
18. Volino, R. J., and Bohl, D. G., 2004, "Separated How Transition Mechanism and Prediction with High and Low Freestream Turbulence under Low Pressure Turbine Conditions," ASME GT2004-53360.
19. Morris, H. M., 1955, "A New Concept of Flow in Rough Conduits," Transactions ASCE. 120, pp. 373-398.
20. Waigh, D. R., and Kind, R. J., 1998, "Improved Aerodynamic Characterization of Regular Three-Dimensional Roughness," AIAA J., 36, pp. 1117-1119.
21. Dirling, R. B. J.. 1973, "A Method for Computing Rough Wall Heat Transfer Rates on Reentry Nosetips," AIAA 73-763.
22. Dvorak, F. A., 1969, "Calculation of Turbulent Boundary Layers on Rough Surfaces in Pressure Gradient," AIAA J., 7, pp. 1752-1759.
23. Bons, J. P., 2002, "St and cf Augmentation for Real Turbine Roughness with Elevated Freestream Turbulence," ASME GT2002-30198.
24. Belnap, B. J., van Rij, J. A., and Ligrani, P. M., 2002, "A Reynolds Analogy for Real Component Surface Roughness," Int. J. Heat & Mass Transfer, 45, pp. 3089-3099.
25. Sigal, A., and Danberg, J. E., 1990. "New Correlation of the Roughness Density Effect on the Turbulent Boundary Layer," AIAA J., 20, pp. 554-556.
26. Stripf, M., Schulz, A., and Wittig, S., 2005, "Surface Roughness Effects on External Heat Transfer of a HP Turbine Vane," ASME J. Turbomach., 127, pp. 200-208.
27. Volino, R. J., 2002, "Separated Flow Transition under Simulated Low-Pressure Turbine Airfoil Conditions: Part 2 - Turbulence Spectra," ASME J. Turbomach., 124, pp. 656-664.
28. Bao, F., and Dallmann, U. C., 2004, "Some Physical Aspects of Separation Bubble on a Rounded Backward-Facing Step," Aero. Sci. & Tech., 8, pp. 83-91.
29. Malkiel, E., and Mayle, R. E., 1996, "Transition in a Separation Bubble," ASME J. Turbomach., 118, pp. 752-759.
30. Watmuff, J. H., 1999, "Evolution of a Wave Packet into Vortex Loops in a Laminar Separation Bubble," J. Fluid Mech., 397, pp. 119-139.
31. Yang, Z., and Voke, P. R., 2001, "Large-Eddy Simulation of Boundary-Layer Separation and Transition at a Change of Surface Curvature," J. Fluid Mech., 493, pp. 305-333.
32. Spalart, P. R., and Strelets, M. K., 2000, "Mechanisms of Transition and Heat Transfer in a Separation Bubble," J. Fluid Mech., 403, pp. 329-349.
33. Rist, U., and Mancher, U., 2002, "Investigations of Time-Growing Instabilities in Laminar Separation Bubbles," Eur. J. Mech. B/Fluids, 21, pp. 495-509.
34. Chandrasekhar, S., 1961, Hydrodynamic and Hydromagnetic Stability, Clarendon Press, Oxford.
35. Roberts, S. K., and Yaras, M. I., "Modeling of Boundary Layer Transition," ASME GT2004-53664, (Accepted for: ASME J. Turbomach.).
36. Mayle, R. E., 1991, "The Role of Laminar-Turbulent Transition in Gas Turbine Engine," ASME J. Turbomach., 113, pp. 509-537.
37. Taylot, G. I., 1939, "Some Recent Developments in the Study of Turbulence," Proc. 5th Intl. Cong. Appl. Mech. J. P. den Hartog, and H. Peters, eds., Wiley, New York, pp. 294-310.
38. Roberts, S. K., and Yaras, M. I., 2003, "Measurements and Prediction of Free-Stream Turbulence and Pressure Gradient Effects on Attached How Boundary Layer Transition," ASME GT2003-38261.
39. Solomon, W. J., Walker, G. J., and Gostelow, J. P., 1996, "Transition Length Prediction for Flows with Rapidly Changing Pressure Gradients," ASME J. Turbomach., 118, pp. 744-751.
40. Emmons, H. W., 1951, "The Laminar-Turbulent Transition in a Boundary Layer - Part 1," J. Aero. Sci., 18, pp. 490-498.
41. Gostelow, J. P., Melwani, N., and Walker, G. J., 1996, "Effects of Streamwise Pressure Gradient on Turbulent Spot Development," ASME J. Turbomach., 118, pp. 737-743.
42. D'Ovidio, A., Harkins, J. A., and Gostelow, J. P., 2001, "Turbulent Spots in Strong Adverse Pressure Gradients - Part 2: Spot Propagation and Spreading Rates," ASME 2001-GT-0406.
43. Walker, G. J., 1989, "Transitional How on Axial Compressor Blading," AIAA J., 27, pp. 595-602.
44. Estevadoral, J., and Kleis, S. J., 1999, "High-Resolution Measurements of Two-Dimensional Instabilities and Turbulence Transition in Plane Mixing Layers," Exp. Fluids, 27, pp. 378-390.