Multi-phase nanocrystalline al alloy with superior strength and modulus at elevated temperatures

Journal of Materials Engineering and Performance

Volumn 14, Issue 4, 2005, Pages 441-447

  Luo, H ^a   Zhang, L C ^a   Shaw, L ^a  

^a UNIVERSITY OF CONNECTICUT   (United States)

Author keywords

Aluminum alloy; Elevated temperature; Nanostruc tured materials; Strength

Indexed keywords

COMPRESSIVE TESTS; DIFFUSIONAL CREEP; ELEVATED TEMPERATURES; HOT EXTRUSION; MODULUS MEASUREMENTS;

CREEP; DIFFUSION; ELASTIC MODULI; GRAIN SIZE AND SHAPE; MECHANICAL ALLOYING; NANOSTRUCTURED MATERIALS; STRAIN RATE; THERMAL EFFECTS;

ALUMINUM ALLOYS;

EID: 27744519486     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1361/105994905X56205     Document Type: Conference Paper

References (42)

1. A. Inoue and H. Kimura, Fabrications and Mechanical Properties of Bulk Amorphous, Nanocrystalline, Nanoquasicrystalline Alloys in Aluminum-Based System, J. Light Met., Vol 1, 2001, p 31-41
2. R.K. Islamgaliev, R.Z. Valiev, R.S. Mishra, and A.K. Mukherjee, Enhanced Superplastic Properties in Bulk Metastable Nanostructured Alloys, Mater. Sci. Eng. A, Vol 304-306, 2001, p 206-210
3. J. Eckert, U. Kuhn, N. Mattern, A. Reger-Leonhard, and M. Heilmaier, Bulk Nanostructured Zr-Based Multiphase Alloys With High Strength and Good Ductility, Scr. Mater., Vol 44, 2001, p 1587-1590
4. T. Mukai, S. Suresh, K. Kita, H. Sasaki, N. Kobayashi, K. Higashi, and A. Inoue, Nanostructured Al-Fe Alloys Produced by E-Beam Deposition: Static and Dynamic Tensile Properties, Acta Mater., Vol 51, 2003, p 4197-4208
5. W.H. Guo and H.W. Kui, Bulk Nanostructured Alloy Formation With Controllable Grain Size, Acta Mater., Vol 48, 2000, p 2117-2121
6. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov, Bulk Nanostructured Materials From Severe Plastic Deformation, Prog. Mater. Sci., Vol 45, 2000, p 103-189
7. H. Gleiter, Nanostructured Materials: Basic Concepts and Microstructure, Acta Mater., Vol 48, 2000, p 1-29
8. Y. Wang, M. Chen, F. Zhou, and E. Ma, High Tensile Ductility in A Nanostructured Metal, Nature, Vol 419, 2002, p 912-915
9. J.Y. Huang, Y.K. Wu, and H.Q. Ye, Deformation Structures in Ball Milled Copper, Acta Mater., Vol 44, 1996, p 1211-1221
10. G.P. Grabovetskaya, K.V. Ivanov, and Y.R. Kolobov, Creep Features of Nanostructured Materials Produced by Severe Plastic Deformation, Ann. Chim., Sci. Mater., Vol 27, 2002, p 89-98
11. H. Hahn, P. Mondal, and K.A. Padmanabhan, Plastic Deformation of Nanocrystalline Materials, Nanostructured Mater., Vol 9, 1997, p 603-606
12. S. Hwang, C. Nishimura, and P.G. McCormick, Deformation Mechanism of Nanocrystalline Magnesium in Compression, Scr. Mater., Vol 44, 2001, p 1507-1511
13. R.K. Islamgaliev, N.F. Yunusova, I.N. Sabirov, A.V. Sergueeva, and R.Z. Valiev, Deformation Behavior of Nanostructured Aluminum Alloy Processed by Severe Plastic Deformation, Mater. Sci. Eng. A, Vol 319-321, 2001, p 877-881
14. Y. Ivanisenko, R.K. Wunderlich, R.Z. Valiev, and H.J. Fecht, Annealing Behaviour of Nanostructured Carbon Steel Produced by Severe Plastic Deformation, Scr. Mater., Vol 49, 2003, p 947-952
15. M. Jain and T. Christman, Synthesis, Processing, and Deformation of Bulk Nanophase Fe-28Al-2Cr Intermetallic, Acta Metall. Mater., Vol 42, 1994, p 1901-1911
16. H.V. Swygenhoven, M. Spaczer, D. Farkas, and A. Caro, The Role of Grain Size and the Presence of Low and High Angle Grain Boundaries in the Deformation Mechanism of Nanophase Ni: A Molecular Dynamics Computer Simulation, Nanostructured Mater., Vol 12, 1999, p 323-326
17. K. Hono and T. Sakurai, Atom Probe Studies of Nanostructured Alloys, Appl. Surf. Sci., Vol 87-88, 1995, p 166-178
18. A. Inoue, Fabrication and Novel Properties of Nanostructured Al Base Alloys, Mater. Sci. Eng. A, Vol 179-180, 1994, p 57-61
19. T.B. Massalski, Binary Alloy Phase Diagrams, 2nd ed. ASM International, 1990, p 147-149, 138-140, and 225-227
20. H. Mehrer, Diffusion in Solid Metals and Alloys, Landolt-Bornstein, New Series, Group 3, Vol 26, Springer, Berlin/Heidelbery, Germany, 1992
21. A. Inoue and H. Kimura, High-Strength Aluminum Alloys Containing Nanoquasicrystalline Particles, Mater. Sci. Eng. A, Vol 286, 2000, p 1-10
22. H.M. Kimura, K. Sasamori, and A. Inoue, Formation, Microstructure and Mechanical Properties of Al-Fe Base Quasicrystalline Alloys, Mater. Sci. Eng. A, Vol 294-296, 2000, p 168-172
23. M. Zawrah and L. Shaw, Microstructure and Hardness of Nanostructured Al-Fe-Cr-Ti Alloys Through Mechanical Alloying, Mater. Sci. Eng. A, Vol 355, 2003, p 37-49
24. L. Shaw, H. Luo, J. Villegas, and D. Miracle, Compressive Behavior of an Extruded Nanocrystalline Al-Fe-Cr-Ti Alloy, Scr. Mater., Vol 50, 2004, p 921-925
25. P.G. Sanders, C.J. Youngdahl, and J.R. Weertman, The Strength of Nanocrystalline Metals With and Without Flaws, Mater. Sci. Eng. A, Vol 234-236, 1997, p 77-82
26. D. Jia, K.T. Ramesh, and E. Ma, Failure Mode and Dynamic Behavior of Nanophase Iron Under Compression, Scr. Mater., Vol 42, 2000, p 73-78
27. C.C. Koch, D.G. Morris, K. Lu, and A. Inoue, Ductility of Nanostructured Materials, MRS Bull., Vol 24 (No. 2), 1999, p 54-58
28. Z.-G. Yang and L. Shaw, Synthesis of Nanocrystalline SiC at Ambient Temperature Through High Energy Reaction Milling, Nanostruct. Mater., Vol 7 (No. 8), 1996, p 873-886
29. L. Shaw, M. Zawrah, J. Villegas, H. Luo, and D. Miracle, Effects of Process-Control Agents on Mechanical Alloying of Nanostructured Aluminum Alloys, Metall. Mater. Trans. A, Vol 34A, 2003, p 159-170
30. A.L. Ortiz and L. Shaw, X-ray Diffraction Analysis of a Severely Plastically Deformed Aluminum Alloy, Acta Mater., Vol 52, 2004, p 2185-2197
31. 2 Alloys Prepared via Mechanical Alloying, Acta Mater., Vol 51, 2003, p 2647-2663
32. R.W. Hayes, R. Rodriguez, and E.J. Lavernia, The Mechanical Behavior of a Cryomilled Al-10Ti-2Cu Alloy, Acta Mater., Vol 49, 2001, p 4055-4068
33. D.L. Yaney and W.D. Nix, Elevated Temperature Deformation Behavior of an Al-8.4 Wt Pet Fe-3.6 Wt Pet Ce Alloy, Metall. Mater. Trans. A, Vol 18, 1987, p 893-902
34. F. Carreno and O.A. Ruano, Separated Contribution of Particles and Matrix on the Creep Behavior of Dispersion Strengthened Materials, Acta Mater., Vol 46, 1998, p 159-167
35. J. Rosler, R. Joos, and E. Arzt, Microstructure and Creep Properties of Dispersion-Strengthened Aluminum Alloys, Metall. Mater. Trans. A, Vol 23, 1992. p 1521-1539
36. D.L. Erich, "Development of A Mechanically Alloyed Aluminum Alloy for 450-6500F Service," AFML-TR-79-4210, Air Force Research Laboratory, Dayton, OH, 1980
37. R.L. Coble, A Model for Boundary-Diffusion Controlled Creep in Polycrystalline Materials, J. Appl. Phys., Vol 34, 1963, p 1679-1682
38. H.J. Frost and M.F. Ashby, Deformation-Mechanism Maps, Pergamon Press, Oxford, U.K., 1982
39. C. Herring, Diffusion Viscosity of a Polycrystalline Solid, J. Appl. Phys., Vol 21, 1950, p 437-445
40. A.K. Mukherjee, J.E. Bird, and J.E. Dorn, Experimental Correlations for High-Temperature Creep, Trans. ASM, Vol 62, 1969, p 155-179
41. M.H. Yoo, C.L. Fu, and J.K. Lee, The Role of Twinning in Brittle Fracture of Ti-Alumindes, Mat. Res. Soc. Symp. Proc., Vol 213, 1991, p 545-554
42. P.D. Pitcher, A.J. Shakesheff, and J.D. Lord, Aluminum Based Metal Matrix Composites for Improved Elevated Temperature Performance, Mater. Sci. Technol., Vol 14, 1998, p 1015-1023