Flow and heat transfer characteristics of an impinging jet in crossflow at low nozzle-to-plate spacings

Proceedings of the ASME Turbo Expo

Volumn 3 PART A, Issue , 2005, Pages 601-617

  Cheong, Brian C Y ^a   Ireland, Peter T ^a   Ling, John P C W ^a   Ashforth Frost, Shirley ^b  

^a UNIVERSITY OF OXFORD   (United Kingdom)

^b NOTTINGHAM TRENT UNIVERSITY   (United Kingdom)

Author keywords

Crossflow; Hot wire and cold wire; Impinging jet; Liquid crystals

Indexed keywords

CROSSFLOWS; HOT-WIRE AND COLD-WIRE; IMPINGING JET; THERMAL FIELDS;

ANEMOMETERS; COMPUTATIONAL FLUID DYNAMICS; HEAT TRANSFER COEFFICIENTS; HYDRODYNAMICS; LIQUID CRYSTALS; NOZZLES; TEMPERATURE DISTRIBUTION; THERMOMETERS;

JETS;

EID: 27744475573     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2005-68636     Document Type: Conference Paper

References (49)

1. Abu Talib, A.R., Neely, A.J., Ireland, P.T. and Mullender, A.J,2003. A novel liquid crystal image processing technique using multiple gas temperature steps to determine heat transfer coefficient distribution and adiabatic wall temperature. Journal of Turbomachinery. Vol. (125) issue 5.
2. Abramovich, G.N., 1963. The theory of turbulent jets. The M.I.T. Press, Cambridge, Mass..
3. Andreopoulos, J., 1983. Heat transfer measurements in a heated jet-pipe flow issuing into a cold cross stream. J. Phys. Fluids, Vol. (26), 11, pp. 3201 - 3210.
4. Ashforth-Frost, S., Cheong, B.C.Y. and Ireland, P.T., 2001. Near wall flow characteristics beneath a turbulent impinging jet. Proc. 5th World Conf. on Exp. Heat Transfer, Fluid Mechanics, and Thermodynamics, Thessaloniki, 24 - 28 Sept., Vol. (2), pp. 987 - 992.
5. Ashforth-Frost, S., Cheong, B.C.Y. and Ireland, P.T., 2001. Near wall flow characteristics beneath a turbulent impinging jet. Proc. 5th World Conf. on Exp. Heat Transfer, Fluid Mechanics, and Thermodynamics, Thessaloniki, 24 - 28 Sept., Vol. (2), pp. 987 - 992.
6. Ashforth-Frost, S., 1994. Flow visualisation of semi-confined jet impingement. PhD Thesis, The Nottingham Trent University, Nottingham, U.K.
7. Ball, S.J., Ashforth-Frost, S., and Jambunathan, K., 1998. Orthogonally impinging axisymmetric jet investigation Heat transfer and near wall thermal flow field characteristics. Int. Heat Transfer Conference proceedings, 11, Vol. (5), pp. 457 - 462.
8. Ball, S.J., 1998. Near wall flow characteristics in jet impingement heat transfer. PhD Thesis, The Nottingham Trent University, Nottingham, U.K.
9. Barata, J.M.M, Durão, D.F.G., Heitor, M.V. and McGuirk, J.J., 1991. Impingement of single and twin turbulent jets through a crossflow. AIM J., 29(4), pp. 595-602.
10. Baughn, J.W., Mayhew, J.E., Anderson, M.R. and Butler, R.J., 1998. A periodic transient method using liquid crystals for the measurement of local heat transfer coefficients. J. Heat Transfer, 120, pp. 772 - 775.
11. Baughn, J.W., Hechanova, A.E. and Van, X., 1991. An experimental study of entrainment effects on heat transfer from a flat surface to a heated circular impingement jet. ASME J. Heat Transfer, pp. 1023 - 1025.
12. Bowley, W.W. and Sucec, J., 1969. Trajectory and spreading of a turbulent jet in the presence of a crossflow of arbitrary velocity distribution. ASME paper no. 69-GT-33.
13. Catalano, G.D., Chang, K. and Mathis, J.A., 1989a. Calculation and measurement of turbulent jet impingement in a crossflow - Part I. Numer. Methods in Laminar and Turbulent Flow, 6th Int. Conf., Swansea, Wales, 11-15 July, 6(2), pp. 1883 - 1894.
14. Catalano, G.D., Chang, K. and Mathis, J.A., 1989b. Calculation and measurement of turbulent jet impingement in a crossflow - Part II. Numer. Methods in Laminar and Turbulent Flow, 6th Int. Conf., Swansea, Wales, 11-15 July, 6(2), pp. 1895 - 1906.
15. Cheong, B.C.Y, 2002. Flow and heat transfer characteristics of an impinging jet with crossflow. PhD Thesis, The Nottingham Trent University, Nottingham, U.K..
16. Copper, T.E., Field. R.J. and Meyer, J.F., 1975. Liquid crystal thermography and its applications of the study of convectivc heat transfer, ASME J. Heat Transfer, Vol. (97), pp. 442 - 450.
17. Cooper, D., Jackson, D.C., Launder, B.E. and Liao, G.X., 1993. Impingement jet studies for turbulent model assessment - I. Flow-field experiments. Int. J. Heat Mass Transfer, 36(10), pp. 2675 - 2684.
18. Chambers, A.C., Gillespie, D.R.H., Ireland, P.T. and Dailey, G.M., 2003, A novel transient liquid crystal technique to determine heat transfer coefficient distributions and adiabatic wall temperature in a three-temperature problem, Journal of Turbomachinery, vol. 125, July.
19. den Ouden, C. and Hoogendoorn, C.J., 1974. Local convective heat transfer coefficients for jets impinging on a plate; experiments using a liquid crystal technique. Proc. 5th Int. Heat Transfer Conf., Tokyo, 3-7 Sept., 5, pp. 293 - 297.
20. Donaldson, C. D. and Snedeker, R.S., 1971. A study of free jet impingement - Part 1. Mean properties of free and impinging jets. J. Fluid Mech., Vol. (45), 2, pp. 281 - 319.
21. Gardon, R., and Akfirat, J.C., 1965. The role of turbulence in determining heat transfer characteristics of impinging jets. Int. J. Heat Mass Transfer, 8, pp. 1261 - 1272.
22. Gardon, R., and Cobonpue, J.C., 1962. Heat transfer between a flat plate and jets of air impinging on it. Int. Development in Heat Transfer, 2, pp. 454 - 460.
23. Gillespie, D.R.H., Guo, S.M., Wang, Z., Ireland, P.T. and Kohler, S.T., 1996. A comparison of full surface local heat transfer coefficient and flow field studies beneath sharp-edge and radiused entry impinging jets.ASME paper, 96-GT- 428.
24. Gillespie, D.R.H., Wang, Z., and Ireland, P.T., 1995. Heating element. British Patent Application, PCT/GB96/2017.
25. Goldstein, R.J., Behbahni, A.I. and Heppelmann, K.K., 1986. Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet. Int. J. Heat Mass Transfer, Vol. (29), No. 8, pp. 1227-1235.
26. Hoogendoorn, C.J., 1977. The effect of turbulence on heat transfer at a stagnation point. Int. J. Heat Mass Transfer, 20, pp. 1333-1338.
27. Hrycak, P., 1983. Heat transfer from round impinging jets to a flat plate. Int. J. Heat Mass Transfer, 26(12), pp. 1857-1865.
28. Ireland, P.T. and Jones, T.V., 1986. Detailed measurements of heat transfer on and around a pedestal in fully developed passage flow. Proc. 8th Int. Heat Transfer Conf., San Francisco, CA, 17-22 Aug., 3, 975 - 980.
29. Ireland, P.T., Wang, Z. and Jones, T.V., 1993. Liquid crystal heat transfer measurements. Measurement Techniques Lecture Series, von Karman Institute of Fluid Dynamics.
30. Ireland, P.T. and Jones, T.V., 1987. Note on the double crystal method of measuring heat transfer coefficient. Report no. 1710/87, University of Oxford, Oxford, U.K.
31. Jambunathan, K., Lai, E., Moss, M.A. and Button, B.L., 1992. A review of heat transfer data for single circular jet impingement. Int. J. Heat and Fluid Flow, 13(2), pp. 106 - 115.
32. Kamotani, Y. and Greber, I., 1974. Experiments on confined turbulent jets in cross flow. NASA Contractor Report, NASA CR-2392, NASA Washington D. C.
33. Kercher, D.M. and Tabakoff, W., 1970. Heat transfer by a square array of air jets impinging perpendicular to a flat surface including the effect of spent air. ASME J. of Engineering for Power, 92, pp. 73 - 82.
34. Ling, P.C.W., Ireland, P.T. and Turner, L., 2004. A technique for processing transient heat transfer, liquid crystal experiments in the presence of lateral conduction. Journal of Turbomachinery, vol.126 pp.247-258.
35. Lucas, M., Ireland, P.T, Wang, Z. and Jones, T.V., 1993. Fundamental studies of impingement cooling thermal boundary conditions. AGARD CP - 527, Paper No. 14.
36. Lytle, D. and Webb, B. W., 1991. Secondary heat transfer maxima for air jet impingement at low nozzle-to-plate spacings. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1991, Eds., 776 - 783, Elsevier, New York.
37. Metzger, D.E. and Korstad, R.J., 1972. Effects of crossflow on impingement heat transfer. J. Eng. for Power, January, pp. 35 - 41.
38. Nishiyama, H., Ota, T., Hamada, M., Takahashi, Y. and Kamiyama, S., 1990. Temperature field of a slightly heated jet in a cross flow. Wärme- und Stoffübertragung 25, pp. 369-375 (1990).
39. Obot, N.T. and Trabold, T.A., 1987. Impingement heat transfer within arrays of circular jets - Part I. Effects of minimum, intermediate, and complete crossflow for small and large spacings. J. Heat Transfer, Vol. (109), pp. 872 -879.
40. Popiel, C.O. and Trass, O., 1991.Visualisation of a free and impinging round jet. Experimental Thermal and Fluid Science, 4, pp. 253 - 264.
41. Popiel, C.O. and Boguslawski, L., 1986. Mass or heat transfer in impinging single, round jets emitted by a bell-shaped nozzle and sharp-ended orifice. Proc. 8th Int. Heat Transfer Conf., San Francisco, CA, 17-22 Aug., 3, pp. 1187-1192.
42. Rao, V.V. and Trass, O., 1964. Mass transfer from a flat surface to an impinging turbulent jet. Can. J. Chem. Eng., 42, pp. 5-99.
43. Son, C., Gillespie, D.R., Ireland, P.T. and Dailey, G.M., 2001. Heat transfer and flow characteristics of an engine representative impingement cooling system. J. Turbomachinery, Vol. (123), pp. 154 - 160.
44. Sparrow, E.M., Goldstern, R.J. and Rouf, M.A., 1975. Effects of nozzle surface separation distance on impingement heat transfer for a jet in crossflow. J. Heat Transfer, 97, pp.528-533.
45. Stay, R.L. and Ben-haim, Y., 1973. Turbulent jets in a confined crossflow. J. Fluid Engineering paper no. 73-FE-15, pp. 551-556.
46. van Treuren, K.W., Wang, Z., Ireland, P.T. and Jones, T.V., 1994. Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets. J. Turbomachinery, Vol. (116), pp. 369-374.
47. Viskanta, R., 1993. Heat transfer to impinging isothermal gas and flame jets. Experimental Thermal and Fluid Science, 6, pp. 111-134.
48. Wang, Z., Ireland, P.T. and Jones, T.V., 1994. A colour image processing system for transient liquid crystal heat transfer experiments. J. Turbomachinery, Vol. (118), pp. 421-427.
49. Wang, Z., Ireland, P.T. and Jones, T.V., 1993. An advanced method of processing liquid crystal video signals from transient heat transfer experiments. J. Turbomachinery, Vol. (117), pp. 184 - 189.