Determination of the compatibility of NBR-EPDM blends by an ultrasonic technique, modulated DSC, dynamic mechanical analysis, and atomic force microscopy

Polymer Engineering and Science

Volumn 45, Issue 9, 2005, Pages 1265-1276

  Pandey, K N ^a   Setua, D K ^a   Mathur, G N ^a  

^a DEFENCE MATERIALS AND STORES RESEARCH AND DEVELOPMENT ESTABLISHMENT   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ACRYLICS; ATOMIC FORCE MICROSCOPY; BINARY MIXTURES; BUTADIENE; CHLORINATION; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC MECHANICAL ANALYSIS; OLEFINS; RUBBER; SURFACE TOPOGRAPHY; THERMOANALYSIS; ULTRASONIC VELOCITY MEASUREMENT;

COMPATIBILIZATION; IMMISCIBLE BINARY BLENDS; NBR; SOLUTION BLENDS;

POLYMER BLENDS;

EID: 27644588466     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.20396     Document Type: Article

References (56)

1. D.K. Setua and J.L. White, Kaut. Gummi Kunstst., 44, 137 (1991).
2. K. Min, "Flow Visualization in an Internal Mixer," in Mixing and Compounding of Polymers: Theory and Practice, I.M. Zloczower and Z. Tadmor, eds., Hanser Publishers, New York (1994).
3. W.M. Hess, C.R. Herd, and P.C. Vegvari, Rubb. Chem. Technol., 66, 329 (1993).
4. P.S. Kim and J.L. White, Rubb. Chem. Technol., 67, 880 (1994).
5. K. Singh, K.N. Pandey, K.K. Debnath, R.S. Pal, and D.K. Setua, Bull. Mater. Science, 19, 587 (1996).
6. D.K. Setua and J.L. White, Rubb. Chem. Technol., 65, 854 (1992).
7. M.M. Patel and A.M. Prabhu, "Blends of Nitrile Rubber," in 160th Proc. Rubb. Div. Meeting, ACS, Cleveland, OH (2001).
8. D. Mangaraj, Rubb. Chem. Technol., 75, 365 (2002).
9. L.A. Urracki, ed., Two-Phase Polymer Systems, Hanser Verlog, Munich (1991).
10. D.R. Paul and S. Newmann, eds., Polymer Blends, Academic Press, New York (1978).
11. A.K. Bhowmik and H.L. Stephens, eds., Handbook of Elastomers, Marcel Dekker, New York (1998).
12. D.K. Setua and J.L. White, Polym. Eng. Sci., 31, 1742 (1991).
13. D.K. Setua and J.L. White, Kaut. Gummi Kunstst., 44, 821 (1991).
14. D.K. Setua and J.L. White, Kaut. Gummi Kunstst., 44, 542 (1991).
15. J. Lohmar, Kaut. Gummi Kunstst., 39, 1065 (1986).
16. C. Nah, S.C. Han, B.W. Kim, and Y.W. Chang, J. Appl. Polym. Sci., 86, 125 (2002).
17. M.G. Oliveira, A.C.O. Gomes, and B.G. Scares, Macromol. Chem. Phys., 204, 465 (2004).
18. A.Y. Coran and R. Patel, Rubb. Chem. Technol., 53, 781 (1980).
19. A.Y. Coran and R. Patel, U.S. Patent 4355139 (1982).
20. D.K. Setua, C. Soman, A.K. Bhowmick, and G.N. Mathur, Polym. Eng. Sci., 42, 10 (2002).
21. A. Amash, R.H. Schuster, and T. Früh, Kaut. Gummi Kunstst, 6, 315 (2001).
22. T. Hoang, T. Trung, G. Yoo, J.H. Ahn, W.C. Zin, W.J. Cho, and C.S. Ha, Bull. Korean Chem. Soc., 22, 1037 (2001).
23. J.P. Kennedy and A. Vidal, J. Polym. Sci., 13, 1765 (1975).
24. X. Qu, S. Shang, G. Liu, and L. Zhang, J. Appl Polym. Sci., 86, 428 (2002).
25. A.A. Katbab and M. Ataee, J. Appl. Polym. Sci., 69, 25 (1998).
26. Z. Sheng, W. Jaianqi, D. Yangbing, W. Shaoli, X. Liqing, and W. Chenlin, Chinese Sci. Bull, 45, 322 (2000).
27. J.Y. Park, D.J. Park, C.S. Ha, and W.J, Cho, J. Appl. Polym. Sci., 51, 1303 (1994).
28. D.K. Setua, K.N. Pandey, A.K. Saxena, and G.N. Mathur, J. Appl. Polym. Sci., 74, 480 (1999).
29. K.N. Pandey, K.K. Debnath, P.T. Rajagopalan, D.K. Setua, and G.N. Mathur, J. Therm. Anal. Cal., 49, 281 (1997).
30. D. Dunn, P.D. Edmonds, and W.J. Fry, "Mathematical Models of Excitation and Propagation in Nerve," in Biological Engineering, H.P. Schwan, ed., McGraw Hill, New York (1969).
31. R.A. Pethrick, J. Makromol. Chem., 9, 91 (1973).
32. R. Gendron, J. Tatbouet, J. Guevremont, M.M. Dumoulin, and L. Piche, Polym. Eng. Sci., 35, 79 (1995).
33. D.W. Phillips and R.A. Pethrick, J. Macromol. Sci. Rev. Macromol. Chem., 16, 1 (1997).
34. V.N. Kuleznev, O.I. Melikova, and V.D. Klykova, Eur. Polym. J., 14, 455 (1978).
35. D.J. Hourston and I.D. Hughes, Polymer, 19, 118 (1978).
36. Y.P. Singh and R.P. Singh, Eur. Polym. J., 19, 535 (1983).
37. M.A. Sidkey, A.M. Abd El Fattah, A.A. Yehia, and N.S. Abd El All, J. Appl. Polym. Sci., 43, 144 (1991).
38. A.A. Yehia, F.M. Helay, and S.H. El Sabbagh, in 2nd Proc. Arabian Int. Conf. Mater. Sci., Alexandria (1990).
39. G.V. Thomas and M.R. Gopinathan, J. Appl. Polym. Sci., 69, 785 (1998).
40. J.S. Trent, J.I. Scheinbeim, and P.R. Couchman, Macromol. Biosci., 16, 589 (1983).
41. M.M. Sein, I. Hudec, and J. Beniska, Polym. Test., 8, 249 (1989).
42. J.H. Butler, D.C. Joy, G.F. Bradlay, and S.J. Krause, Polymer, 36, 1781 (1995).
43. R.M. Overrney, D.P. Leta, L.J. Fetters, Y. Liu, M.H. Rabailovich, and J. Sokolov, J. Vac. Sci. Technol., B14, 1278 (1996).
44. R.M. Overrney, Procedures in Scanning Probe Microscopy, Wiley, New York (1995).
45. A. Wawkuschewaki, K. Cramar, H.J. Cantow, and S.N. Magnonov, Ultramicroscopy, 58, 185 (1995).
46. W. Stocker, A.J. Lovinger, M. Schumachar, S. Graff, J.C. Wittmann, and B. Lotz, Polym. Prep. Am. Chem. Soc. Polym. Div., 37, 548 (1996).
47. D.K. Setua, in Proceedings of the 18th Rubber Conference, Indian Rubber Manufacturers Research Association, Mumbai, India (2000).
48. N. Yerina and S. Magonov, Rub. Chem. Technol., 76, 846 (2003).
49. V. Nigam, D.K. Setua, and G.N. Mathur, Rub. Chem. Technol., 73, 830 (2000).
50. D.K. Setua, A.K. Bhowmick, C. Soman, D. Chattaraj, and G.N. Mathur, in Proc. Int. Conf. Exhib. Rubb. Allied Mater., Asia Rubtech. Expo, New Delhi, India (2002).
51. D.W. Schwark, D.L.Vezie, J.R. Reffner, E.L. Thomas, and B.K. Annis, J. Mater. Sci. Lett., 11, 352 (1992).
52. M. Ganter, R. Brandsch, Y. Thomann, T. Malner, and G. Bar, Kaut. Gummi Kunstst., 52, 717 (1999).
53. S.C. Bhatt, R.S. Rawat, and B.S. Semwal, J. Acoust. Soc. Ind., 27, 297 (1999).
54. A.T. Seshadri, B. Subramaniam, and A.V. Narasimham, J. Acoust. Soc. Ind., 12, 27 (1984).
55. M.G. Oliveira and B.C. Soares, Polimeros Ciencia Technol., 12, 11 (2002).
56. R. Srivastava, R. Awasthi, and D.K. Setua, Kaut. Gummi Kunstst., 53, 268 (2000).