Sintered glass-ceramics and glass-ceramic matrix composites from CRT panel glass

Journal of the American Ceramic Society

Volumn 88, Issue 7, 2005, Pages 1886-1891

  Bernardo, E ^a,b   Andreola, F ^a   Barbieri, L ^a   Lancellotti, I ^a  

^a UNIVERSITY OF PADOVA   (Italy)

^b UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; CATHODE RAY TUBES; CERAMIC MATRIX COMPOSITES; CRYSTALLIZATION; ELASTIC MODULI; FRACTURE TOUGHNESS; MECHANICAL PROPERTIES; MICROHARDNESS; REINFORCEMENT; SINTERING; WASTES;

CRT PANEL GLASS; NEPHELINE GLASS-CERAMICS; POWDERED GLASS; SINTERED GLASS-CERAMICS;

GLASS CERAMICS;

EID: 27644536577     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2005.00380.x     Document Type: Article

References (44)

1. P. Colombo, G. Brusatin, E. Bernardo, and G. Scarinci, "Inertization and Reuse of Waste Materials by Vitrification and Fabrication of Glass-Based Products," Curr. Opin. Solid State Mater. Sci., 7, 225-39 (2003).
2. A. G. Pincus, "Soviet Building with Slag Si tall," Glas. Ind., 53, 6-9 (1972).
3. P. D. Sarkisov, "The Modern State of Technology and Application of Glass-Ceramics;" pp. 411-41 in Glass '89 Survey Papers of the XVth International Congress on Glass, Leningrad, 1989.
4. W. Höland and G. Beall, Glass-Ceramic Technology. The American Ceramic Society, Westerville, OH, USA, 2002.
5. Z. Strnad, Glass-Ceramic Materials. Elsevier Science Publishers, Amsterdam, 1985.
6. C. Fredericci, E. D. Zanotto, and E. C. Ziemath, "Crystallization Mechanism and Properties of a Blast Furnace Slag Glass," J. Non-Cryst. Sol., 273, 64-75 (2000).
7. E. B. Ferreira, E. D. Zanotto, and L. A. M. Scudeller, "Glass and Glass-Ceramic from Basic Oxygen Furnace (BOF) Slag," Glass Sci. Technol., 75, 75-86 (2002).
8. V. Gomes, C. D. G. De Borba, and H. G. Riella, "Production and Characterization of Glass Ceramics from Steelwork Slag," J. Mater. Sci., 37, 2581-5 (2002).
9. M. L. Öveçoǧlu, "Microstructural Characterization and Physical Properties of a Slag-Based Glass-Ceramic Crystallized at 950 and 1100°C," J. Eur. Ceram. Soc., 18, 161-8 (1998).
10. 2 Glassy Systems Formulated from Waste Products," J. Am. Ceram. Soc., 83, 2515-20 (2000).
11. L. Barbieri, A. Corradi, and I. Lancellotti, "Alkaline and Alcaline-Earth Silicate Glasses and Glass-Ceramics from Municipal and Industrial Wastes," J. Eur. Ceram. Soc., 20, 2477-83 (2000).
12. I. Gutzow, R. Pascova, A. Karamanov, and J. Schmelzer, "The Kinetics of Surface Induced Sinter-Crystallization and the Formation of Glass-Ceramic Materials," J. Mater. Sci., 33, 5265-73 (1998).
13. T. J. Clark and J. S. Reed, "Kinetic Processes Involved in the Sintering and Crystallization of Glass Powders," J. Am. Ceram. Soc., 69, 837-46 (1986).
14. R. Müller, E. D. Zanotto, and V. M. Fokin, "Surface Crystallization of Silicate Glasses: Nucleation Sites and Kinetics," J. Non-Cryst. Sol., 274, 208-31 (2000).
15. M. O. Prado and E. D. Zanotto, "Glass Sintering with Concurrent Crystallization," C R Chimie, 5, 773-86 (2002).
16. M. Tashiro, "Crystallization of Glasses: Science and Technology," J, Non-Cryst. Sol, 73, 575-84 (1985).
17. A. Karamanov, I. Gutzow, I. Chomakov, J. Christov, and L. Kostov, "Synthesis of Wall-Covering Glass-Ceramics from Waste Raw Materials," Glastech. Ber. Glass Sci. Technol., 67, 227-30 (1994).
18. A. Karamanov, G. Taglieri, and M. Pelino, "Iron-Rich Sintered Glass-Ceramics from Industrial Wastes," J. Am. Ceram. Soc., 82, 3012-6 (1999).
19. 2+ Ratio on the Crystallization of Iron-Rich Glasses Made with Industrial Wastes," J. Am. Ceram. Soc., 83, 3153-57 (2000).
20. A. Karamanov, M. Pelino, and S. Hreglich, "Sintered Glass-Ceramics from Municipal Solid Waste-Incinerator Fly Ashes Part I: The Influence of the Heating Rate on the Sinter-Crystallization," J. Eur. Ceram. Soc., 23, 827-32 (2003).
21. J. J. Brennan and K. M. Prewo, "Silicon Carbide Fibre Reinforced Glass-Ceramic Matrix Composites Exhibiting High Strength and Toughness," J. Mater. Sci., 17, 2371 (1982).
22. K. M. Prewo, "Tension and Flexural Strength of Silicon Carbide Fibre-Reinforced Glass-Ceramics," J. Mater. Sci., 21, 3590 (1986).
23. K. M. Prewo, J. J. Brennan, and G. K. Layden, "Fibre Reinforced Glasses and Glass-Ceramics for High Performance Applications," Am. Ceram. Soc. Bull., 65 [2] 305-22 (1986).
24. K. M. Prewo, "Fatigue and Stress Rupture of Silicon Carbide Fibre-Reinforced Glass-Ceramics," J. Mater. Sci., 22, 2695 (1987).
25. L. Barbieri, A. Corradi, and I. Lancellotti, "Bulk and Sintered Glass-Ceramics by Recycling Municipal Incinerator Bottom Ash," J. Eur. Ceram. Soc., 20 [10] 1637-43 (2000).
26. L. Barbieri, A. Corradi, I. Lancellotti, G. C. Pellacani, and A. R. Boccaccini, "Sintering and Crystallization Behavior of Glass Frits Made from Silicate Wastes," Glass Technol., 44 [5] 184-90 (2003).
27. 3 Platelet Inclusions," J. Mater. Sci., 29, 4273-8 (1994).
28. 3 Platelets," J. Mater. Sci. Lett., 15, 60-63 (1996).
29. A. R. Boccaccini, M. Bücker, J. Bossert, and K. Marszalek, "Glass Matrix Composites from Coal Fly Ash and Waste Glass," Waste Manage., 17, 39-45 (1997).
30. 3 Platelet-Reinforced Glass Matrix Composites," Ceram. Int., 30, 785-91 (2004).
31. 3 Platelet-Reinforced Glass Matrix Composites Obtained from Glasses Coining from Dismantled Cathode Ray Tubes," J. Eur. Ceram. Soc., 25 [9] 1541-50.
32. 3-Platelet- Reinforced Barium-Magnesium Aluminosilicate Glass-Ceramic Composites," Composites, 28A, 505-10 (1997).
33. G. Brusatin, E. Bernardo, and G. Scarinci, "Sintered Glass-Ceramics from Waste Inert Glass;" IV International Workshop VARIREI (Valorization and Recycling of Industrial Residues), L'Aquila, Italy, June 2003.
34. S. Hreglich, R. Falcone, and M. Vallotto, "The Recycling of End of Life Panel Glass from TV Sets in Glass Fibers and Ceramic Productions;" pp. 123-134 in Proceedings of the International Symposium "Recycling and Reuse of Glass Cullet", University of Dundee, UK, 19-20 March 2001.
35. E. Bernardo, O. Scarinci, and S. Hreglich, "Mechanical Properties of Metal-Particulate Lead-Silicate Glass Matrix Composites Obtained by Means of Powder Technology," J. Eur. Ceram. Soc., 23, 1819-27 (2003).
36. M. Marshall and J. Henderson, New Approaches to the Challenge of CRT Recycling. Recycling and Reuse of Glass Cullet; pp. 75. Thomas Telford, London, UK, 2001.
37. S. Hreglich, R. Falcone, and M. Vallotto, The Recycling of End of Life. Panel Glass from TV Sets in Glass Fibres and Ceramic Products. Recycling and Reuse of Glass Gullet; pp. 123. Thomas Telford, London, UK, 2001.
38. J. S. Nordyke, Lend in the World of Ceramics. The American Ceramic Society, Westerville, OH, USA, 1984.
39. L. A. R. Siikamaki, "End of Life Cathode Ray Tube Glass as a Raw Material for Hollow Ware Glass Product;" in Recycling and Reuse of Waste Materials, pp. 743-50. Edited by R. K. Dhir, M. D. Newlands, and J. E. Halliday. Thomas Telford Publishing, London, 2003.
40. F. Andreola, L. Barbieri, A. Corradi, I. Lancellotti, R. Falcone, and S. Hreglich, "Possibility to Recycle Cathode Ray Tube Glass for the Obtainment of Glass-Ceramics;" IV International Workshop VARIREI (Valorization and Recycling of Industrial Residues), L'Aquila, Italy, June 2003.
41. E. Dorre and H. Hübner, Alumina. Springer Verlag, Heidelberg, 1984.
42. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evalvialion of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurement," J. Am. Ceram. Soc., 64 [9] 533-8 (1981).
43. A. R. Boccaccini, "On the Viscosity of Glass Composites Containing Rigid Inclusions," Mater. Lett., 34, 285-9 (1998).
44. A. R. Boccaccini, D. Eifler, and G. Ondracek, "Determination of the Young's Modulus of Platelet Reinforced Composite Materials," Mater. Sci. Eng., A207, 228-33 (1996).