Fabrication of fine AIN particles by pulverizing with very small ZrO 2 beads

Journal of the American Ceramic Society

Volumn 88, Issue 6, 2005, Pages 1676-1679

  Qiu, Jin Yu ^a   Hotta, Yuji ^a   Sato, Kimiyasu ^a   Watari, Koji ^a   Mitsuishi, Kenshi ^b  

^a NATIONAL INSTITUTE OF ADVANCED INDUSTRIAL SCIENCE AND TECHNOLOGY AIST   (Japan)

^b MITSUI CHEMICALS INC   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

DISPERSIONS; GRINDING (COMMINUTION); LOW TEMPERATURE EFFECTS; PARTICLE SIZE ANALYSIS; SINTERING; TRANSMISSION ELECTRON MICROSCOPY; ZIRCONIA;

AGGLOMERATES; GRINDING MEDIA; SHEARING FORCES; SURFACE AREAS;

ALUMINUM NITRIDE;

EID: 27644464893     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2005.00327.x     Document Type: Article

References (34)

1. G. A. Slack, "Nonmetallic Crystals with High Thermal Conductivity," J. Phys. Chem. Solids, 34, 321-35 (1973).
2. W. Werdecker and F. Aldinger, "Aluminum Nitride - An Alternative Ceramics Substrate for High-Power Application in Microcircuit," IEEE Trans. Comp., Hybrids Manuf. Technol., CHMT-7, 399-404 (1984).
3. L. M. Sheppard, "Aluminum Nitride: A Versatile but Challenging Material," Am. Ceram. Bull., 69 [11] 1801-3 (1990).
4. K. Komeya, H. Inoue, and A. Tsuge, "Effect of Various Additives on Sintering of Aluminum Nitride," Yogyo-Kyokaishi, 93, 41-6 (1985).
5. 3 Addition on the Sintering of AIN," J. Mater. Sci. Lett., 1, 325-6 (1982).
6. K. Shinozaki and A. Tsuge, "Development of High Thermal Conductivity AIN," Ceramics (Bull. Ceram. Soc. Jpn.), 21, 1130-5 (1986).
7. A. F. Virkar, T. B. Jackson, and R. A. Cutler, "Thermodynamic and Kinetic Effect of Oxygen Removal on the Thermal Conductivity of Aluminum Nitride," J. Am. Ceram. Soc., 72, 2031-42 (1989).
8. 3 Additions," J. Eur. Ceram. Soc., 16, 899-906 (1996).
9. 2 Binary Additive," J. Mater. Sci. Lett., 18, 703-4 (1999).
10. 3," Ceram. Int., 29 [8] 893-6 (2003).
11. H. Zhou, L. Qiao, and R. Fu, "Effect of the Fluoride Additives on the Oxidation of AIN," Mater. Res. Bull., 37 [15] 2427-35 (2002).
12. 2-Doped AIN Ceramics," J. Am. Ceram. Soc., 79 [12] 3103-8 (1996).
13. K. Watari, H. J. Hwang, M. Toroyama, and S. Kanzaki, "Effective Sintering Aids for Low-Temperature Sintering of AIN Ceramics," J. Mater. Res., 14 [4] 1409-17 (1999).
14. 2O on the Low Temperature Sintering and Thermal Conductivity of AIN Ceramics." J. Eur. Ceram. Soc., 23 [9] 1517-24 (2003).
15. Y. Liu, Y. Wu, and H. Zhou, "Microstructure of Low-Temperature Sintered AIN," Mater. Lett., 35 [3-4] 232-5 (1998).
16. N. Kuramoto, H. Taniguchi, and I. Aso, "Sintering and Properties of High-Purity AIN Ceramics," Adv. Ceram., 26, 107-19 (1989).
17. N. Hashimoto, H. Yoden, and S. Deki, "Sintering Behavior of Fine Aluminum Nitride Powder Synthesized from Aluminum Polynuclear Complexes." J. Am. Ceram. Soc., 75 [8] 2098-106 (1992).
18. M. L. Panchula and J. Y. Ying, "Nanocrystalline Aluminum Nitride: II, Sintering and Properties," J. Am. Ceram. Soc., 86 [7] 1121-7 (2003).
19. K. Watari, M. E. Brito, M. Yasuoka, M. C. Valecillos, and S. Kanzaki, Influence of Powder Characteristics on Sintering Process and Thermal Conductivity of Aluminum Nitride Ceramics," J. Ceram. Soc. Jpn., 103 [9] 891-900(1995).
20. K. Baba, N. Shohata, and M. Yonezawa, "Synthesis and Properties of Ultrafine AIN Powder by PF Plasma," Appl. Phys. Let., 54, 2309-11 (1989).
21. Y. G. Cao, X. L. Chen, Y. C. Lan, J. Y. Li, Y. P. Xu, T. Xu, Q. L. Liu, and J. K. Liang, "Blue Emission and Raman Scattering Spectrum from AIN Nanocrystalline Powders," J. Cryst. Growth. 213, 198-202 (2000).
22. G. P. Johnston, R. E. Muenchausen, D. M. Smith, and S. R. Foltyn, "Reactive Laser Ablation Synthesis of Nanosize Aluminum Nitride," J. Am. Ceram. Soc., 75 [12] 3465-8 (1992).
23. S. E. Pratsinis, G. Wang, S. Panda, T. Guiton, and W. Weimer, "Aerosol Synthesis of AIN by Nitridation of Aluminum Vapor and Clusters," J. Mater. Res., 10 [3] 512-20 (1995).
24. F. J. Moura and R. J. Munz, "Vapor-Phase Synthesis of Nanosize Aluminum Nitride Particles Using a Two-Stage Transferred Arc Reactor," J. Am. Ceram. Soc., 80 [9] 2425-8 (1997).
25. C. Grigoriu, M. Hirai, K. Nishiura, W. Jiang, and K. Yatsui, "Synthesis of Nanosized Aluminum Nitride Powders by Pulsed Laser Ablation," J. Am. Ceram. Soc., 83 [10] 2631-3 (2000).
26. Q. Zhu, W. Jiang, and K. Yatsui, "Numerical and Experimental Studies on Synthesis of Ultrafine Nanosize Powders of AIN by Ion Beam Evaporation," J. Appl. Phys., 86 [9] 5279-85 (1999).
27. M. L. Panchula and J. Y. Ying, "Nanocrystalline Aluminum Nitride: I, Vapor-Phase Synthesis in a Forced-Flow Reactor," J. Am. Ceram. Soc., 86 [7] 1114-20(2003).
28. Y. Qiu and L. Gao, "Novel Way to Synthesize Nanocrystalline Aluminum Nitride from Coarse Aluminum Powder," J. Am. Ceram. Soc., 86 [7] 1214-6 (2003).
29. Y. Kinemuchi, K. Murai, C. Sannlong, C.-H. Cho, H. Suematus, W. Jiang, and K. Yatsui, "Nanosize Powders of Aluminum Nitride Synthesize by Pulsed Wire Discharge," J. Am. Ceram. Soc., 86 [3] 420-4 (2003).
30. T. Suehiro, N. Hirosaki, R. Terao, J. Tatami, T. Meguro, and K. Komeya, Synthesis of Aluminum Nitride Nanopowder by Gas-Reduction-Nitridation Method," J. Am. Ceram. Soc., 86 [6] 1046-8 (2003).
31. S. Tanaka, Z. Kato, N. Uchida, and K. Uematsu, "Direct Observation of Aggregates and Agglomerates in Alumina Granules," Powder Technol., 129, 153-5 (2003).
32. Y. Nagai and G. C. Lai, "Preparation of Fine AIN Powders by Wet Ball-Milling and Their Characterization," J. Ceram. Soc. Jpn., 105 [1] 6-10 (1997).
33. W. M. Sigmund, N. S. Bell, and L. Bergstrom, "Novel Powder-Processing Methods for Advanced Ceramics," J. Am. Ceram. Soc., 83 [7] 1557-74 (2000).
34. J. Y. Qiu, K. Watari, Y. Hotta, and K. Mitsuishi, "Influence of Powder Characteristics on Sintering of AIN Ceramics," Key Eng. Mater., 280-283, 1409-12(2005).