Performance evaluation criteria for heat exchangers based on first law analysis

Journal of Enhanced Heat Transfer

Volumn 12, Issue 2, 2005, Pages 121-157

  Yilmaz, M ^a   Comakli, O ^a   Yapici, S ^a   Sara, O N ^a  

^a ATATÜRK UNIVERSITY   (Turkey)

Author keywords

Enhanced heat transfer; First law of thermodynamics; Heat exchangers; Pec; Performance evaluation criteria

Indexed keywords

CONSTRAINT THEORY; HEAT TRANSFER; THERMODYNAMICS;

FIRST LAW OF THERMODYNAMICS; PERFORMANCE EVALUATION CRITERIA (PEC); SECOND LAW ANALYSIS;

HEAT EXCHANGERS;

EID: 27544507305     PISSN: 10655131     EISSN: None     Source Type: Journal    
DOI: 10.1615/JEnhHeatTransf.v12.i2.10     Document Type: Article

References (75)

1. Andrews, M.J. and Fletcher, L.S. (1996) Comparison of Several Heat Transfer Enhancement Technologies for Gas Heat Exchangers, J. Heat Transfer, Vol. 118, pp. 897-902.
2. Barron, R.F. and Yeh, S.L. (1976) Longitudinal Conduction in a Three-Fluid Heat Exchanger, ASME Paper No. 76-WA/HT-9.
3. Bejan, A. (1978) General Criterion for Rating Heat-Exchanger Performance, Int. J. Heat Mass Transfer, Vol. 21, No.4, pp. 655-658.
4. Bergles, A.E., Blumenkrantz, A.R. and Taborek, J. (1974) Performance Evaluation Criteria for Enhanced Heat Transfer Surfaces, Proc. 4th Int. Heat Transfer Conf., Vol. 2, pp. 239-243.
5. Bergles, A.E., Bunn, R.L., and Junkhan, G.H. (1974) Extended Performance Evaluation Criteria for Enhanced Heat Transfer Surfaces, Letters Heat Mass Transfer, Vol. 1, pp. 113-120.
6. Bergwerk, W. (1963) The Utilisation of Research Data in Heat Exchanger Design, Proc. IMechE, Vol. 178.
7. Brown, T.R. (1986) Use These Guidelines for Quick Preliminary Selection of Heat-Exchanger Type, Chemical Engineering, pp. 107-108.
8. Chen, Y. and Fiebig, M. (1998) Effect of the Fin Heat Conduction on the Performance of Punched Winglets in Finned Oval Tubes, in Energy Conservation Through Heat Transfer Enhancement of Heat Exchangers, eds. S. Kakaç, Nato Advanced Study Institute, Cesme, İzmir, Turkey, pp. 385-400.
9. Cowell, T.A. (1990) A General Method for the Comparison of Compact Heat Transfer Surfaces, J. Heat Transfer, Vol. 112, pp. 288-294.
10. Dipprey, D.F. and Sabersky, R.H. (1963) Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers, Int.J. Heat Mass Transfer, Vol. 6, pp. 329-353.
11. Dong, Y., Huixiong, L., and Tingkuan, C. (2001) Pressure Drop, Heat Transfer and Performance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes, Experimental Thermal and Fluid Science, Vol. 24, pp. 131-138.
12. El-Sayed, M. (1999) Revealing the Cost-Efficiency Trends of the Design Concepts of Energy-Intensive Systems, Energy Conversion & Management, Vol. 40, pp. 1599-1615.
13. Evans, L.B. and Churchill, S.W. (1962) Chem. Eng. Prog. Symp. Ser. Vol. 58, No. 10, pp. 55.
14. Fraas, A.P. (1989) Heat Exchanger Design, John Wiley,New York, pp. 216-228.
15. Gu, N. and Zhang, Z.X. (1989) A New Method to Evaluate Augmentative Heat Transfer Technique, in Second International Symposium on Multiphase Flow and Heat Transfer, eds. X.J. Chen, Veziroǧlu T.N., and Tien C.L., Hemisphere, New York, pp. 764-773.
16. Han, J.C. (1988) Heat Transfer and Friction Characteristics in Rectangular Channels With Rib Turbulators, J. Heat Transfer, Vol. 110, pp. 321-328.
17. Heggs, P.J. and Stones, P.R. (1980) Improved Design Methods for Finned Tube Heat Exchangers, Trans. IChemE, Vol. 58, pp. 147-154.
18. Hewitt, G.F., Shires, G.L., and Bott, R.L. (1994) Process Heat Transfer, Begell House, New York, pp. 11-42.
19. Horvath, C.D. (1977) Three-Fluid Heat Exchangers of Two and Three Surfaces, Periodica Polytechnica, Vol. 21, pp. 33-44.
20. th Edition. John Wiley, New York.
21. Jensen, S. (1960) Chemical Engineering Progress Symposium Series, Heat Transfer, Vol. 56, No. 30, pp. 195-201.
22. Jiang, P.X., Fan, M. H., Si, G.S., and Ren, Z.P. (2001) Thermal-Hydraulic Performance of Small Scale Micro-Channel and Porous-Media Heat Exchangers, Int. J. Heat Mass Transfer, Vol. 44, pp. 1039-1051.
23. Kakaç, S. (1998) Introduction to Heat Transfer Enhance ment, in Energy Conservation Through Heat Transfer Enhancement of Heat Exchangers, eds. S. Kakaç Nato Advanced Study Institute, Cesme, İzmir,Turkey, pp. 1-11.
24. Kakaç, S. and Liu, H. (1997) Heat Exchangers-Selection, Rating, and Thermal Design, CRC Press, New York, pp. 115-133.
25. Kays, W.M. and London, A.L. (1950) Heat Transfer and Flow Friction Characteristics of Some Compact Heat Exchanger Surfaces, Part 2-Design Data for Thirteen Surfaces, Trans. ASME, Vol.72, pp. 1087-1097.
26. rd edition, McGraw-Hill, New York.
27. Kern, D.Q. and Kraus, A.D. (1972) Extended Surface Heat Transfer, McGraw-Hill, New York.
28. Kreith F. and Black, W.Z. (1980) Basic Heat Transfer, Harper & Row, New York.
29. Kumada, M. (1998) A Study on the High Performance Ceramic Heat Exchanger for Ultra High Temperatures, in Energy Conservation Through Heat Transfer Enhancement of Heat Exchangers, eds. S. Kakaç, Nato Advanced Study Institute, Cesme, İzmir, Turkey, pp. 597-620.
30. Le Foil, J. (1957) Experimental Research Heat Transfer, La Houille Blanche Vol. 1, pp. 30-45.
31. London, A.L. (1964) Compact Heat Exchangers: Part 2. Surface Geometry, Mechanical Engineering, Vol. 86, pp. 31-34.
32. Lord, R.G., Bussjager, R.C., and Geary, D.F. (1978) High Performance Heat Exchanger, U.S. Patent 4, 118, 944, 10 October.
33. Manzoor, M., Ingham, D.B., and Heggs, P.J. (1983) The One-Dimensional Analysis of Fin Assembly Heat Transfer, J. Heat Transfer, Vol. 105, pp. 646-651.
34. Miyashita H., Fukushima, K., Kometani, M., and Yamaguchi, S. (1990) Enhanced Heat Transfer Mechanism Using Turbulence Promoters in Rectangular Duct, in Heat Transfer Enhancement and Energy Conservation, eds. S.J. Deng, T.N. Veziroǧlu, Y.K. Tan, and L.Q. Chen, Hemisphere, New York, pp. 159-166.
35. Norris, R.H. (1939) Proceedings of the Fifth International Congress of Applied Mechanics, 585.
36. Norris, R.H. (1970) Some Simple Approximate Heat Transfer Correlations for Turbulent Flow in Ducts with Rough Surfaces, in Augmentation of Convective Heat and Mass Transfer, ASME, Vol. 16, pp. 16-26.
37. Nunner, W. (1958) Heat Transfer and Pressure Drop in Rough Pipes, AERE Lib./Trans., pp. 786.
38. Picon-Nunez, M., Polley, G.T., Tores-Reyes, E., and Gallegos-Munoz, A. (1999) Surface Selection and Design of Plate-Fin Heat Exchangers, Applied Thermal Engineering, Vol. 19, pp. 917-931.
39. Raju, K.S.N. and Bansal, J.C. (1981) Design of Plate Heat Exchangers, in Low Reynolds Number Forced Convection in Channels and Bundles, ASI Proceedings, Ankara Turkey, pp. 597-616.
40. Reay, D.A. (1991) Heat Transfer Enhancement-A Review of Techniques and Their Possible Impact on Energy Efficiency in the U.K., Heat Recovery Systems & CHP, Vol. 11, No. 1, pp. 1-40.
41. Royal, J.H. and Bergles, A.E. (1978) Augmentation of Horizontal In-Tube Condensation by Means of Twisted Tape Inserts and Internally Finned Tubes, J. Heat Transfer, Vol. 100, pp. 17-24.
42. Sano Y. and Usui, H. (1982) Evaluation of Heat Transfer Promoters by the Fluid Dissipation Energy, Heat Transfer Jpn. Res., Vol. 11, pp. 91-96.
43. Şara, O.N., Pekdemir, T., Yapici, S., and Yilmaz, M. (2001) Enhancement of Heat Transfer from a Flat Surface in a Channel Flow by Attachment of Rectangular Blocks, Int. J. Energy Research, Vol. 25, No. 7, pp. 563-576.
44. Sara, O.N., Pekdemir, T., Yapici, S., Yilmaz, M. (2001) Heat-Transfer Enhancement in a Channel Flow with Perforated Rectangular Blocks, Int. J. Heat and Fluid Flow, Vol. 22, pp. 509-518.
45. Saunders, E.A.D. (1988) Heat Exchangers-Selection, Design & Construction, Longman Scientific & Technical, NewYork.
46. Sekulic, D.P. and Kmecko, I. (1995) Three-Fluid Heat Exchanger Effectiveness-Revisited, J. Heat Transfer, Vol. 117, pp. 226-229.
47. Shah, R.K. (1983) Compact Heat Exchanger Surface Selection, Optimization, and Computer-aided Thermal Design, in Low Reynolds Number Flow Heat Exchangers, eds. S. Kakaç, R.K. Shah, and A.E. Bergles, Hemisphere, Washington, DC, pp. 845-874.
48. Shah, R.K. and London, A.L. (1978) Laminar Flow Forced Convection in Ducts, Supplement 1 to Advances in Heat Transfer, Academic Press, New York.
49. Soland, J.G., Mack, Jr. W.M., and Rohsenow, W.M. (1978) Performance Ranking of Plate-Fin Heat Exchanger Surfaces, J. Heat Transfer, Vol. 100, pp. 514-519.
50. Song, D. and Gu, W. (1990) The Optimization Analysis Calculation for High Performance Heat Exchanger, in Heat Transfer Enhancement and Energy Con servation, eds. S.J. Deng, T.N. Veziroǧlu, Y.K. Tan, and L.Q. Chen, Hemisphere, New York, pp. 535-542.
51. Sorlie, T. (1962) Three-Fluid Heat Exchanger Design Theory, Counter and Parallel Flow, Tr. No. 54, Department of Mechanical Engineering, Stanford University, CA.
52. Sparrow, E.M. and Liu, C.H. (1979) Heat-Transfer, Pressure-Drop and Performance Relationships for In-Line, Staggered, and Continuous Plate Heat Exchangers, Int. J. Heat Mass Transfer, Vol. 22, pp. 1613-1625.
53. Sunden, B. (1998) Heat Transfer and Fluid Flow in Rib-Roughened Rectangular Ducts, in Energy Conservation Through Heat Transfer Enhancement of Heat Exchangers, eds. S. Kakaç, Nato Advanced Study Institute, Cesme, İzmir, Turkey, pp. 249-266.
54. Tauscher, R. and Mayinger, F. (1998) Heat Transfer Enhancement in a Plate Heat Exchanger with Rib-Roughened Surfaces, in Energy Conservation Through Heat Transfer Enhancement of Heat Exchangers, eds. S. Kakaç, Nato Advanced Study Institute, Cesme, İzmir, Turkey, pp. 121-135.
55. Usui, H., Sano, Y., Iwashita, K., and Isozaki, A. (1986) Enhancement of Heat Transfer by a Combination of Internally Grooved Rough Tube and a Twisted Tape, Int. Chem. Eng., Vol. 26, No. 1, pp. 97-104.
56. Webb, R.L. (1981) Performance Evaluation Criteria for Use of Enhanced Heat Transfer Surfaces in Heat Exchanger Design, Int. J. Heat Mass Transfer, Vol. 24, No. 4, pp. 715-726.
57. Webb, R.L. (1982) Performance, Cost Effectiveness, and Water-Side Fouling Considerations of Enhanced Tube Heat Exchangers for Boiling Service with Tube-Side Water Flow, Heat Transfer Engineering, Vol. 3, No. 3-4, pp. 84-98.
58. Webb, R.L. (1988) Performance Evaluation Criteria for Enhanced Surface Geometries Used in Two-Phase Heat Exchangers, in Heat Transfer Equipment, eds. R.K. Shah, E.G. Subbarao, and R.A. Mashelkar, Hemisphere, Washington, DC, pp. 697-706.
59. Webb R.L. (1994) Principles of Enhanced Hreat Transfer, New York: John Wiley.
60. Webb, R.L. and Bergles, A.E. (1983) Performance Evaluation Criteria for Selection of Heat Transfer Surface Geometries Used in Low Reynolds Number Heat Exchangers, in Low Reynolds Number Flow Heat Exchangers, eds. S. Kakac, R. K. Shah, and A. E. Bergles, Hemisphere Pub. Corp., Washington, DC, pp. 735-752.
61. Webb, R.L. and Eckert, E.R.G. (1972) Application of Rough Surfaces to Heat Exchanger Design, Int. J. Heat Mass Transfer, Vol. 15, pp. 1647-1658.
62. Webb, R.L., Eckert, E.R.G., and Goldstein, R.J. (1971) Heat Transfer and Friction in Tubes with Repeated-Rib Roughness, Int. J. Heat Mass Transfer, Vol. 14, pp. 601-617.
63. Webb, R.L. and Scott, M.J. (1980) A Parametric Analysis of the Performance of Internally Finned Tubes for Heat Exchanger Application, J. Heat Transfer, Vol. 102, pp. 38-43.
64. White, W.J. and Wilkie, L., (1970) The Effect of Rib Profile on Heat Transfer and Pressure Loss Properties of Transversely Ribbed Roughened Surfaces, in Augmentation of Convective Heat and Mass Transfer, eds. A.E. Bergles, R.L. Webb, ASME, New York, pp. 44-54.
65. William, F., Pirie, M.A.M., and Warburton, C. (1970) Heat Transfer from Surfaces Roughened by Ribs, in Augmentation of Convective Heat and Mass Transfer, eds. A.E. Bergles, R.L. Webb, ASME, New York, pp. 36-43.
66. Withers, J.G. and Habdas, E.P. (1974) Heat Transfer Characteristics of Helical Corrugated Tubes for In-Tube Boiling of Refrigerants, AIChE Symp. Ser., Vol. 70, No. 138, pp. 98-106.
67. Wood, A.S.,Tupholme, G.E., Bhatti, M.I.H., and Heggs, P.J. (1996) Performance Indicators for Steady-State Heat Transfer Through Fin Assemblies, J. Heat Transfer, Vol. 118, pp. 310-316.
68. Yapici, S. (1999) Energetic Correlation of Local Mass Transfer in Swirling Pipe Flaw, Industrial Engineering Chemistry Research, Vol. 38, pp. 1712-1717.
69. Yilmaz M., Karsh S., and Sara, O.N. (2001) Performance Evaluation Criteria for Heat Exchangers Based on Second Law Analysis, Exergy Int. J., Vol. 1, No. 4, pp. 278-294.
70. Yilmaz M., Yapici S., Comakli Ö., and Şara O.N. (2002) Energy Correlation of Heat Transfer and Enhancement Efficiency in Decaying Swirl Flow, Heat and Mass Transfer, Vol. 38, No. 4-5, pp. 351-358.
71. Zaherzadeh, N. H. and Jagadish, B. S. (1975) Heat Transfer in Decaying Swirl Flows, Int. J. Heat Mass Transfer, Vol. 18, pp. 941-944.
72. Zhang, Y.M., Gu, W.Z., and Han, J.C. (1994) Heat Transfer and Friction in Rectangular Channels with Ribbed or Ribbed-Grooved Walls, J. Heat Transfer, Vol. 116, pp. 58-65.
73. Zimparov, V.D., Vulchanov, N.L., and Delov, L.B. (1991) Heat Transfer and Friction Characteristics of Spirally Corrugated Tubes for Power Plant Condensers-1. Experimental Investigation and Performance Evaluation, Int. J. Heat Mass Transfer, Vol. 34, No. 9, pp. 2187-2197.
74. Zimparov, V. (2001) Enhancement of Heat Transfer by a Combination of Three-Start Spirally Corrugated Tubes with a Twisted Tape, Int. J. Heat Mass Transfer, Vol. 44, pp. 551-574.
75. Zukauskas, A. (1986) Heat Transfer Augmentation in Single-Phase Flow, Proc. 8th Int. Heat Transfer Conf., Vol.1, pp. 47-57.