Recovery of seismic resistance in corrosion-damaged reinforced concrete through FRP jacketing

International Journal of Materials and Product Technology

Volumn 23, Issue 3-4, 2005, Pages 389-415

  Tastani, S ^a   Pantazopoulou, S J ^a  

^a DEMOCRITUS UNIVERSITY OF THRACE   (Greece)

Author keywords

Bond; FRPs; Rehabilitation; Reinforcement corrosion; Seismic upgrading

Indexed keywords

BENDING STRENGTH; BONDING; CORROSION PROTECTION; DUCTILITY; FIBER REINFORCED PLASTICS; FRICTION; MATHEMATICAL MODELS; POLYMERS; REINFORCED CONCRETE; STIFFNESS;

FRPS; REHABILITATION; REINFORCEMENT CORROSION; SEISMIC UPGRADING;

SEISMOLOGY;

EID: 27344460914     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJMPT.2005.007737     Document Type: Article

References (39)

1. ACI 318-95 (1995) Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Detroit, Michigan.
2. ACI 440.2R-02 (2002) Guide for the Design and Construction of Externally Bonded FRF Systems for Strengthening Concrete Structures, American Concrete Institute, Detroit, Michigan.
3. Amleh, L. and Mirza, S. (1999) 'Corrosion influence on bond between steel and concrete', ACI Structural J., Vol. 96, No. 3, pp.415-423.
4. Bonacci, J. and Maalej, M. (2000) 'Externally bonded fiber - reinforced polymer for rehabilitation of corrosion damaged concrete beams', ACI Structural J., Vol. 97, No. 5, pp.703-711.
5. Bousias, N., Trianatafillou, T., Fardis, M., Spathis, L. and O'Regan, B. (2004) 'Fiber-reinforced polymer retrofitting of rectangular r.c. columns with or without corrosion', ACI Structural J., Vol. 101, No.4, pp.512-520.
6. Cairns, J. and Millard, S. (1999) 'Reinforcement corrosion and its effect on residual strength of C. Strs', Forde, M. (Ed.): Proc, of 8th Int. Conf. on Structure Faults & Repair, Eng. Technics Press, Edinburgh, UK.
7. Castel, A., Francois, R. and Arliguie, G. (2000) 'Mechanical behavior of corroded RC beams. II: bond and notch effects', RILEM, Materials and Structures, Vol. 33, pp.545-551.
8. CEB-FIP Model Code 1990 (1993) Comite Euro-International du Beton, Thomas Telford Pubs., London, p.437.
9. Chung, L., Cho, S., Kim, J. and Yi, S. (2004) 'Correction factor suggestion for aci development length provisions based on flexural testing of r.c. slabs with various levels of corroded reinforcing bars', Elsevier, Engineering Structures, Vol. 24, pp.1013-1026.
10. Contecvet (2001) Rodriguez et al. (Eds.): A Validated Users Manual for Assessing the Residual Service Life of Concrete Structures, British Cement Association (BCA), Geotecnia y Cimientos S.A (GEOCISA - ES), Swedish Cement and Concrete Research Institute (CBI), (cd-rom).
11. Coronelli, D. (2002) 'Corrosion cracking and bond strength modeling for corroded bars in r.c.', ACI Structural J., Vol. 99, No. 3, pp.267-276.
12. Coronelli, D. and Gambarova, P.G. (2004) 'Structural assessment of corroded r.c. beams: modeling guidelines', ASCE J. of Structural Engineering, Vol. 130, No. 8, pp.1214-1224.
13. Debaiky, A., Green, M. and Hope, B. (2002) 'Carbon fiber-reinforced polymer wraps for corrosion control and rehabilitation or r.c. columns', ACI Material J., Vol. 99, No. 2, pp. 129-137.
14. Den Uijl, J. and Bigaj, A. (1996) 'A bond model for ribbed bars on concrete confinement', HERON, Vol. 41, No. 3, pp.201-226.
15. EC2 (2002) Design of Concrete Structures, European Committee for Standardization, Brussels.
16. Eligehausen, R., Popov, E. and Bertero, V. (1983) Local Bond Stress - Slip Relationships of Deformed Bars Under Generalized Excitations, Report No. UCB/EERC-83/23, Earthquake Eng. Research Center, Berkeley.
17. FEMA 273 (1997) NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington DC.
18. FIB Bulletin No. 14 (2001) Externally Bonded FRP Reinforcement for R.C. Structures, Technical report prepared by T.G. 9.3, International Federation for Structural Concrete (fib), Lausanne, Switzerland, p. 130.
19. FIB Bulletin No. 24 (2003) Seismic Assessment and Retrofit of R.C. Buildings, Technical report prepared by T.G. 7.1, International Federation for Structural Concrete (fib), Lausanne, Switzerland, p.306.
20. Lee, C., Bonacci, J., Thomas, M., Maalej, M., Khajenpour, S., Hearn, N., Pantazopoulou, S. and Sheikh, S. (2000) 'Accelerated corrosion and repair of r.c. columns using CFRP sheets', Canadian J. of Civil Engineering, NRC, Special Issue on ISIS-Canada, Vol. 27, No. 5, pp.949-959.
21. Lee, H., Kage, T., Noguchi, T. and Tomosawa, F. (2003) 'An experimental study on the retrofitting effects of reinforced concrete columns damaged by rebar corrosion strengthened with carbon fiber sheets', Cement and Concrete Research, Vol. 33, No. 4, pp.563-570.
22. Lundgren, K. (2002) 'Modelling the effect of corrosion on bond in r.c.', Magazine of Concrete Research, Vol. 54, No. 3, pp. 165-173.
23. Mander, J., Priestley, M. and Park, R. (1988) 'Theoretical stress-strain model for confined concrete', ASCE J. of Structural Engineering, Vol. 114, No. 8, pp. 1804-1825.
24. Martin-Perez, B. and Pantazopoulou, S. (2001) 'Effect of bond, aggregate interlock and dowel action on the shear-strength degradation of r.c.', Elsevier Engineering Structures, Vol. 23, pp.214-227.
25. Moehle, J., Elwood, K. and Sezen, H. (2002) 'Gravity load collapse of building frames during earthquakes', Sheikh, S. and Bayrak O. (Eds.): Proceedings of S. Uzumeri Symposium, Behavior and Design of C. Str. for Seismic Performance, ACI SP-197, pp.215-238.
26. Noghabai, K. (1995) Splitting of Concrete in the Anchorage Zone of Deformed Bars, Licentiate Thesis, Dept. of Civ. Engrg., Lulea University of Technology, Lulea Sweden.
27. Pantazopoulou, S. and Tastani, S. (2004) 'Considerations on the use of FRPs in seismic upgrading of existing RC structures' submitted for possible publication, ACI Structural Journal (under review).
28. Pantazopoulou, S.J. and Papoulia, K.D. (2001) 'Modelling of cover-cracking due to reinforcement corrosion in RC structures', ASCE J. of Engineering Mechanics, Vol. 127, No. 4, pp.342-351.
29. Pantazopoulou, S.J., Bonacci, J.F., Sheikh, S., Thomas, M.D.A. and Hearn, N. (2001) 'Repair of corrosion-damaged columns with FRP wraps', ASCE J. of Composites for Construction, Vol. 5, No. 1, pp.3-11.
30. Priestley, M., Seible, F. and Calvi, M. (1996) Seismic Design and Retrofit of Bridges, J. Wiley & Sons Inc., NY.
31. Richart, F., Brandtzaeg, A. and Brown, R. (1928) 'A study of the failure of concrete under combined compressive stresses', Engrg. Experiment Station Bull, No. 185, Univ. of Illinois, Urbana.
32. Rodriguez, J., Ortega, L., Casal, J. and Diez, J. (1996) 'Assessing structural conditions of concrete structures with corroded reinforcement', in Dhir, R. and Jones, M. (Eds.): Concrete in the Service of Mankind: Concrete Repair, Rehabilitation and Protection, E&FN Spon., pp.65-78.
33. Sheikh, S., Pantazopoulou, S., Bonacci, J., Thomas, M. and Hearn, N. (1996) Repair of Corrosion Damaged Columns with ACM, Technical Report, MTO No.31902, Ministry of Transportation of Ontario, Canada, p. 100.
34. Soudki, K. and Sherwood, T. (2000) 'Behavior of r.c. beams strengthened with carbon fibre reinforced polymer laminates subjected to corrosion damage', Canadian J. of Civil Engineering, NRC, Special Issue on ISIS-Canada, Vol. 27, No. 5, pp. 1005-1010.
35. Stanish, K., Hooton, R. and Pantazopoulou, S. (1999) 'Corrosion effects on bond strength in r.c.', ACI Structural J., Vol. 96, No. 6, pp.915-921
36. Tastani, S. and Pantazopoulou, S. (2002) Experimental and Analytical Investigation of Corroded Bar Anchorages, Honorary Volume dedicated to Prof. R. Eligehausen, Institut für Werkstoffe in Bauweser, Universitat Stuttgart.
37. Tastani, S. and Pantazopoulou, S. (2004) 'Experimental evaluation of FRP jackets in upgrading RC corroded columns with substandard detailing', Elsevier Engineering Structures, Vol. 26, No. 6, pp.817-829.
38. Tepfers, R. (1979) 'Cracking of concrete cover along anchored deformed reinforcing bars', Magazine of Concrete Research, Vol. 31, No. 106, pp.3-12.
39. Vecchio, F. and Collins, M. (1986) 'The modified compression field theory for R.C. elements subjected to shear', ACI Journal, Vol. 83, No. 2, pp.219-231.