A novel semi-empirical model for evaluating thermal performance of porous metallic foam heat sinks

Journal of Electronic Packaging

Volumn 127, Issue 3, 2005, Pages 223-234

  Jeng, Tzer Ming ^a   Liu, Li Kang ^c   Hung, Ying Huei ^b,c  

^a AIR FORCE INSTITUTE OF TECHNOLOGY   (Taiwan)

^b ASME   (Taiwan)

^c NATIONAL TSING HUA UNIVERSITY   (Taiwan)

Author keywords

Nusselt Number; Porous Metallic Foam Heat Sink; Reynolds Number; Single Blow Method; Transient Liquid Crystal Method

Indexed keywords

FOAMS; HEAT TRANSFER; LIQUID CRYSTALS; NUSSELT NUMBER; POROUS MATERIALS; REYNOLDS NUMBER;

DISCRETE ALGORITHMS; POROUS METALLIC FOAM HEAT SINK; SINGLE BLOW METHOD; TRANSIENT LIQUID CRYSTAL METHOD;

HEAT SINKS;

EID: 26844544082     PISSN: 10437398     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1997159     Document Type: Article

References (36)

1. Du Plessis, P., Montillet, A., Comiti, J., and Legrand, J., 1994, "Pressure Drop Prediction for Flow Through High Porosity Metallic Foams," Chem. Eng. Sci., 49, pp. 3545-3553.
2. Antohe, B., Lage, J. L., Price, D. C., and Weber, R. M., 1997, "Experimental Determination of Permeability and Inertial Coefficients of Mechanically Compressed Aluminum Metal Layers," ASME J. Fluids Eng., 119, pp. 404-412.
3. Lage, J. L., Antohe, B., and Nield, D. A., 1997, "Two Types of Nonlinear Pressure-Drop Versus Flow-Rate Relation Observed for Saturated Porous Media," ASME J. Fluids Eng., 119, pp.700-706.
4. Calmidi, V. V., and Mahajan, R. L., 1999, "The Effective Thermal Conductivity of High Porosity Fibrous Metal Foams," ASME J. Heat Transfer, 121, pp. 466-471.
5. Bhattacharya, A., Calmidi, V. V., and Mahajan, R. L., 2002, "Thermophysical Properties of High Porosity Metal Foams," Int. J. Heat Mass Transfer, 45, pp. 1017-1031.
6. Paek, J. W., Kang, B. H., Kim, S. Y., and Hyun, J. M., 2000, "Effective Thermal Conductivity and Permeability of Aluminum Foam Materials," Int. J. Thermophys., 21, pp. 453-464.
7. Hunt, M. L., and Tien, C. L., 1988, "Effects of Thermal Dispersion on Forced Convection in Fibrous Media," Int. J. Heat Mass Transfer, 31, pp. 301-309.
8. Calmidi, V. V., and Mahajan, R. L., 2000, "Forced Convection in High Porosity Metal Foams," ASME J. Heat Transfer, 122, pp. 557-565.
9. Golombok, M., Jariwala, H., and Shirvill, L. C., 1990, "Gas-Solid Heat Exchange in a Fibrous Metallic Material Measured by a Heat Regenerator Technique," Int. J. Heat Mass Transfer, 33, pp. 243-252.
10. Younis, L. B., and Viskanta, R., 1993, "Experimental Determination of the Volumetric Heat Transfer Coefficient between Stream of Air and Ceramic Foam," Int. J. Heat Mass Transfer, 36, pp. 1425-1434.
11. Chen, P. H., and Chang, Z. C., 1997, "Measurements of Thermal Performance of Cryocooler Regenerators Using an Improved Single-Blow Method," Int. J. Heat Mass Transfer, 40, pp. 2341-2349.
12. Hwang, J. J., Hwang, G. J., Yeh, R. H., and Chao, C. H., 2002, "Measurement of Interstitial Convective Heat Transfer and Frictional Drag for Flow across Metal Foams," ASME J. Heat Transfer, 124, pp. 120-129.
13. Lu, T. J., Stone, H. A., and Ashby, M. F., 1998, "Heat Transfer in Open-Cell Metal Foams," Acta Mater., 46, pp. 3619-3635.
14. Ichimiya, K., 1999, "A New Method for Evaluation of Heat Transfer between Solid Material and Fluid in a Porous Medium," ASME J. Heat Transfer, 121, pp. 978-983.
15. Angirasa, D., and Peterson, G. P., 1999, "Forced Convection Heat Transfer Augmentation in a Channel with a Localized Heat Source Using Fibrous Material," ASME J. Electron. Packag., 121, pp. 1-7.
16. Cooper, T. E., Field, R. J., and Meye, J. F., 1975, "Liquid Crystal Thermography and Its Application to the Study of Convective Heat Transfer," ASME J. Heat Transfer, 97, pp. 442-450.
17. Camci, C., Kim, K., Hippensteele, S. A., and Poinsatte, P. E., 1993, "Evaluation of a Capturing Based Transient Liquid Crystal Method for High-Resolution Mapping of Convective Heat Transfer on Curved Surfaces," ASME J. Heat Transfer, 115, pp. 311-318.
18. Ekkad, S. V., and Han, J. C., 1996, "Heat Transfer Inside and Downstream of Cavities Using Transient Liquid Crystal Method," J. Thermophys. Heat Transfer, 10, pp. 511-516.
19. Valencia, A., Fiebig, M., and Mitra, K., 1995, "Influence of Heat Conduction on Determination of Heat Transfer Coefficient by Liquid Crystal Thermography," Exp. Heat Transfer, 8, pp. 271-279.
20. 2 Injection through Compound Angle Holes Using a Transient Liquid Crystal Image Method," ASME Paper No. 95-GT-10.
21. Hwang, J. J., and Cheng, C. S., 1999, "Augmented Heat Transfer in a Triangular Duct by Using Multiple Swirling Jets," ASME J. Heat Transfer, 121, pp. 683-690.
22. Jeng, T. M., 2002, "Fluid Flow and Heat Transfer Behavior in Porous Channels," Ph.D. thesis, Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan.
23. Ellison, G. N., 1986, Thermal Computations for Electronic Equipment, Van Nostrand Reinhold, New York, p.36.
24. Lee, S. L., 1989, "Weighting Function Scheme and Its Application on Multi-dimensional Conservation Equations," Int. J. Heat Mass Transfer, 32, pp. 2065-2073.
25. Lee, S. L., 1989, "A Strong Implicit Solver for Two-Dimensional Elliptic Differential Equations," Numer. Heat Transfer, Part B, 16, pp. 161-178.
26. Jeng, T. M., Hwang, G. J., and Hung, Y. H., 2001, "Thermal Performance of Metallic Porous Channels for Electronics Cooling Applications," IPACK2001-15771, Proceedings of InterPACK'01, InterPACK 2001 Conference, Kauai, HI, July 8-13.
27. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainties in Single-Sample Experiments," Mech. Eng. (Am. Soc. Mech. Eng.), pp. 3-8.
28. Moffat, R. J., 1988, "Describing the Uncertainties in Experimental Results," Exp. Therm. Fluid Sci., 1, pp. 3-17.
29. Hung, Y. H., and Perng, S. W., 1988, "An Experimental Technique for Measuring Transient Natural-/Forced-Convective Heat Fluxes in a Vertical Channel," Exp. Therm. Fluid Sci., 1, pp. 305-314.
30. Lin, H. H., and Hung, Y. H., 1993, "Transient Forced Convection Heat Transfer in a Vertical Rib-Heated Channel Using a Turbulence Promoter," Int. J. Heat Mass Transfer, 36, pp. 1553-1571.
31. Butler, R. J., and Baughn, J. W., 1996, "The Effect of the Thermal Boundary Condition on Transient Method Heat Transfer Measurements on a Plate Plate with a Laminar Boundary Layer," ASME J. Heat Transfer, 118, pp. 831-837.
32. Chyu, M. K., Ding, H., Downs, J. P., and Soechting, F. O., 1998, "Determination of Local Heat Transfer Coefficient Based on Bulk Mean Temperature Using a Transient Liquid Crystals Technique," Exp. Therm. Fluid Sci., 18, pp. 142-149.
33. Mills, A. F., 1962, "Experimental Investigation of Turbulent Heat Transfer in the Entrance Region of a Circular Conduit," J. Mech. Eng. Sci., 4, pp. 63-177.
34. Amiri, A., Vafai, K., and Kuzay, T. M., 1995, "Effects of Boundary Conditions on Non-Darcian Heat Transfer through Porous Media and Experimental Comparisons," Numer. Heat Transfer, Part A, 27, pp. 651-664.
35. Wang, M. P., 2000, "Forced Convective Heat Transfer in a Rectangular Hollow or Porous Channel," Master's thesis, Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan.
36. Singh, B. S., and Dybbs, A., 1976, "Error in Temperature Measurements due to Conduction along the Sensor Leads," ASME J. Heat Transfer, 98, pp. 491-495.