Seismic behavior of code-designed bidirectionally eccentric systems

Journal of Structural Engineering

Volumn 131, Issue 10, 2005, Pages 1497-1514

  Dutta, Sekhar Chandra ^a   Das, Prithwish Kumar ^b   Roy, Rana ^a  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

^b Academy of Technology West Bengal University of Technology   (India)

Author keywords

Concrete structures; Displacement; Eccentricity; Energy; Inelastic action; Seismic effects

Indexed keywords

BUILDINGS; CONCRETE CONSTRUCTION; CRACK INITIATION; DEGRADATION; EARTHQUAKES; ELASTOPLASTICITY; HYSTERESIS; MATHEMATICAL MODELS; STIFFNESS;

DISPLACEMENT; ECCENTRICITY; ENERGY; INELASTIC ACTION; SEISMIC EFFECTS;

SEISMOLOGY;

EID: 26644438118     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2005)131:10(1497)     Document Type: Article

References (41)

1. Annigeri, S., Mittal, A. K., and Jain, A. K. (1996). "Uncoupled frequency ratio in asymmetric buildings." Earthquake Eng. Struct. Dyn., 25(8), 871-881.
2. Bertero, R. D. (1995). "Inelastic torsion for preliminary seismic design." J. Struct. Eng., 121(8), 1183-1189.
3. Bureau of Indian Standards (IS). (1984). "Indian standard criteria for earthquake resistant design of structures." IS 1893-1984, New Delhi, India (older version).
4. Bureau of Indian Standards (IS). (2002). "Indian standard criteria for earthquake resistant design of structures." IS 1893-2000, New Delhi, India (recent version).
5. Chandler, A. M., Correnza, J. C., and Hutchinson, G. L. (1996). "Seismic torsional provisions: Influence on element energy dissipation." J. Struct. Eng., 122(5), 494-500.
6. Chandler, A. M., Duan, X. N., and Rutenberg, A. (1996b). "Seismic torsional response: Assumptions, controversies and research progress." Eur. Earthquake Eng., 10(1), 37-50.
7. Chung, Y. S., Meyer, C., and Shinozuka, M. (1990). "Automated seismic design of reinforced concrete buildings." ACI Struct. J., 87(3), 326-340.
8. Chung, Y. S., Meyer, C., and Shinozuka, M. (1988). "SARCF user's guide: Seismic analysis of reinforced concrete frames." NCEER Rep. No. 88-0024, University of New York, Buffalo, N.Y.
9. Das, P. K., and Dutta, S. C. (2000). "Controlling deterioration of RC asymmetric buildings under seismic loadings." Proc., ICI-Asian Conf. on Ecstasy in Concrete, November 20-22, Bangalore, India, 295-303.
10. Das, P. K., and Dutta, S. C. (2002). "Effect of strength and stiffness deterioration on seismic behavior of r/c asymmetric buildings." Int. J. Applied Mech. Eng. 7(2), 527-564.
11. De Stefano, M., Faella, G., and Ramasco, R. (1993). "Inelastic response and design criteria of plan-wise asymmetric systems." Earthquake Eng. Struct. Dyn., 22(3), 245-259.
12. Duan, X. N., and Chandler, A. M. (1993). "Inelastic seismic response of code-designed multistorey frame buildings with regular asymmetry." Earthquake Eng. Struct. Dyn., 22(5), 431-445.
13. Dutta, S. C. (2001). "Effect of strength deterioration on inelastic seismic torsional behavior of asymmetric RC buildings." Build. Environ., 36(10), 1109-1118.
14. Dutta, S. C., Bhattacharya, K., and Roy, R. (2004). "Response of low-rise buildings under seismic ground excitation incorporating soil-structure interaction." Soil Dyn. Earthquake Eng., 24(12), 893-913.
15. Das, P. K., (2004). "Effect of coupled lateral-torsional vibration on inelastic seismic behavior of r/c buildings with uni-directional and bidirectional asymmetry." PhD Thesis, Dept. of Applied Mechanics, Bengal Engineering College (Deemed Univ.), West Bengal, India.
16. Dutta, S. C., and Das, P. K. (2002a). "Inelastic seismic response of code-designed reinforced concrete asymmetric buildings with strength degradation." Eng. Struct., 24(10), 1295-1314.
17. Dutta, S. C., and Das, P. K. (2002b). "Validity and applicability of two simple hysteresis models to assess progressive seismic damage in R/C asymmetric buildings." J. Sound Vib., 257(4), 753-777.
18. Esteva, L. (1987). "Earthquake engineering research and practice in Mexico after the 1985 earthquakes." Bull. of the New Zealand Nat. Soc. for Earthquake Engineering, 20(3), 159-200.
19. Federal Emergency Management Agency (FEMA). (1992). "NEHRP rec ommended provisions for the development of seismic regulations for new buildings, Part I: Provisions." Rep. No. FEMA-222, Washington, D.C.
20. Ghersi, A., and Rossi, P. P. (2000). "Formulation of design eccentricity to reduce ductility demand in asymmetric buildings." Eng. Struct., 22(7), 857-871.
21. Goel, R. K. (1997). "Seismic response of asymmetric systems: energy-based approach." J. Struct. Eng., 123(11), 1444-1453.
22. Goel, R. K., and Chopra, A. K. (1994). "Dual-level approach for seismic design of asymmetric-plan buildings." J. Struct. Eng., 120(1), 161-179.
23. Goel, R. K., and Chopra, A. K. (1990a). "Inelastic seismic response of one-storey-asymmetric plan systems." Rep. No. UCB/EERC-90/14, Earthquake Engineering Research Center, Berkeley, Calif.
24. Goel, R. K., and Chopra, A. K. (1990b). "Inelastic seismic response of one-storey, asymmetric-plan systems: effects of stiffness and strength distribution." Earthquake Eng. Struct. Dyn., 19(7), 949-970.
25. Housner, G. W. (1959). "Behavior of structures during earthquakes." Proc. Engineering Mechanics Division, ASCE, 85(EM-4), 109-129.
26. Kan, C. L., and Chopra, A. K. (1981). "Torsional coupling and earthquake response of simple elastic and inelastic systems." J. Struct. Eng., 107, 1569-1588
27. Khan, M. R. (1987). "Improved method of generation of artificial time-histories, rich in all frequencies." Earthquake Eng. Struct. Dyn., 15(8), 985-992.
28. Mahin, S. A., and Bertero, V. V. (1981). "An evaluation of inelastic seismic design spectra." J. Struct. Eng., 107(9), 1777-1795.
29. Mittal, A. K., and Jain, A. K. (1995). "Effective strength eccentricity concept for inelastic analysis of asymmetric structures." Earthquake Eng. Struct. Dyn., 24, 69-84.
30. Mohammadi, R. K., El Naggar, M. H., and Moghaddam, H. (2004). "Optimum strength distribution for seismic resistant shear buildings." Int. J. Solids Struct., 41(22-23), 6597-6612.
31. Murty, C. V. R., and Hall, J. F. (1994). "Earthquake collapse analysis of steel frames." Earthquake Eng. Struct. Dyn., 23(11), 1199-1218.
32. Naeim, F (1995). "On seismic design implications of the 1994 Northridge Earthquake records." Earthquake Spectra, 11(1), 91-109.
33. Park, Y J., Reinhorn, A. M., and Kunnath, S. K. (1987). "IDARC: Inelastic damage analysis of reinforced concrete frame- shear-wall structure." NCEER Rep. No. 87-008, University of New York, Buffalo, N.Y.
34. Paulay, T. (1997). "Displacement based design approach to earthquake-induced torsion in ductile buildings." Eng. Struct., 19(9), 699-707.
35. Paulay, T. (2000). "A simple displacement compatibility-based seismic design strategy for reinforced concrete buildings." Proc., 12th World Conf. on Earthquake Engineering, Auckland, Paper No. 0062.
36. Reinhorn, A. M., Kunnath, S. K., and Panahshahi, N. (1988). "Modeling of R/C building structures with flexible floor diaphragms (IDARC2)." NCEER Rep No. 88-0035, University of New York, Buffalo, N.Y.
37. Rutenberg, A. (1992). "Nonlinear response of asymmetric building structures and seismic codes: A state of the art review." Eur. Earthquake Eng., 6(2), 3-19.
38. Shakib, H. (2004). "Evaluation of dynamic eccentricity by considering soil-structure interaction: A proposal for seismic design codes." Soil Dyn. Earthquake Eng., 24(5), 369-378.
39. Strong Motion Database of National Information Service for Earthquake Engineering (NISEE) at University of California, Berkeley, Calif, 〈http:/-nisee.berkeley.edu〉.
40. Syamal, P. K., and Pekau, O. A. (1985). "Dynamic response of bilinear asymmetric structures." Earthquake Eng. Struct. Dyn., 13, 527-541
41. Whittaker, S. (1995). "NSF-EERC Kobe earthquake reconnaissance report." Draft Chapter on Engineered Buildings, Earthquake Engineering Research Center, University of California, Berkeley, Calif.