Determination of critical concrete pavement fatigue damage locations using influence lines

Journal of Transportation Engineering

Volumn 131, Issue 8, 2005, Pages 599-607

  Hiller, Jacob E ^a   Roesler, Jeffery R ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

California; Concrete pavements; Damage; Fatigue; Rigid pavements

Indexed keywords

FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; RIGIDITY; SHRINKAGE; STRESS ANALYSIS; THERMAL GRADIENTS;

CRITICAL CUMULATIVE DAMAGE LEVEL; FATIGUE DAMAGE; RIGID PAVEMENT;

CONCRETE PAVEMENTS;

CONCRETE; FATIGUE; PAVEMENT;

EID: 25444471258     PISSN: 0733947X     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-947X(2005)131:8(599)     Document Type: Article

References (34)

1. Armaghani, J. M., Larsen, T. J., and Smith, L. L. (1987). "Temperature response of concrete pavements." Transportation Research Record 1121, Transportation Research Board, Washington, D.C., 23-33.
2. Awad, M. E., and Hilsdorf, H. K. (1974). "Strength and deformation characteristics of plain concrete subjected to high repeated and sustained loads." Abeles Symp., Fatigue of Concrete, ACI Publication SP-41, American Concrete Institute, Farmington Hills, Mich., 1-13.
3. Banan, M.-R. (1995). "Data-based mathematical modeling: Development and application." PhD thesis, Univ. of Illinois, Urbana, Ill.
4. Beckemeyer, C. A., Khazanovich, L., and Yu, H. T. (2002). "Determining the amount of built-in curling in JPCP:A case study of pennsylvania I-80." Transportation Research Record 1809, Transportation Research Board, Washington, D.C., 85-92.
5. Byrum, C. R. (2000). "Analysis by high speed profile of jointed concrete pavement slab curvatures." Transportation Research Record 1730, Transportation Research Board, Washington, D.C., 1-9.
6. Byrum, C. R., and Hansen, W. (1994). "Influence function approach to analysis of jointed Portland cement concrete pavement." Transportation Research Record 1449, Transportation Research Board, Washington, D.C., 148-158.
7. Darter, M., Khazanovich, L., Snyder, M. B., Rao, S., and Hallin, J. (2001). "Development and calibration of a mechanistic design procedure for jointed plain concrete pavements." Proc., 7th Int. Conf. on Concrete Pavements, Orlando, Fla., Vol. 1, International Society for Concrete Pavements, Elliot City, Md., 113-131.
8. Domenichini, L., and Marchionna, A. (1981). "Influence of stress range on plane concrete pavement fatigue design." Proc., 2nd Int. Conf. on Concrete Pavement Design, Purdue Univ., West Lafayette, Ind., 55-65.
9. ERES Consultants. (1999). ISLAB2000 finite element code for rigid pavement analysis, Version 3.6, Champaign, Ill.
10. Hansen, W., Jensen, E. A., and Mohr, P. (2001). "The effects of high strength and associated concrete properties on pavement performance." Rep. No. FHWA-RD-00-161, Federal Highway Administration, United States Department of Transportation, Washington, D.C.
11. Harvey, J. T., Chong, A., and Roesler, J. R. (2000a). "Climate Regions for Mechanistic-Empirical Pavement Design in California and Expected Effects on Performance." Draft Rep. Univ. of California-Berkeley, Pavement Research Center, Richmond, Calif.
12. Harvey, J. T., Roesler, J. R., Farver, J., and Liang, L. (2000b). "Preliminary evaluation of proposed LLPRS rigid pavement structures and design inputs." Final Rep. No. FHWA/CA/OR-2000/02, Univ. of California-Berkeley, Pavement Research Center, Richmond, Calif.
13. Heath, A. C., Roesler, J. R., and Harvey, J. T. (2003). "Modeling longitudinal, corner and transverse cracking in jointed concrete pavements." Stud. Hist. Philos. Sci, 4(1), 51-58.
14. Hiller, J. E., and Roesler, J. R. (2002). "Transverse joint analysis for use in mechanistic-empirical design of rigid pavements." Transportation Research Record p. 1809, Transportation Research Board, Washington, D.C. 42-51.
15. Khazanovich, L., and Roesler, J. R. (1997). "DIPLOBACK: Neural-network-based backcalculation program for composite pavements." Transportation Research Record P. 1570, Transportation Research Board, Washington, D.C., 143-150.
16. Khazanovich, L., Selezneva, O. I., Yu, H. T., and Darter, M. I. (2001). "Development of rapid solutions for prediction of critical continuously reinforced concrete pavement stresses." Transportation Research Record P. 1778, Transportation Research Board, Washington, D.C., 64-72.
17. Larson, G., and Dempsey, B. (1997). ICM software. Enhanced integrated climatic model version 2.0 (ICM), Univ. of Illinois, Urbana, Ill.
18. Lu, Q., Le, T., Harvey, J. T., Lea, J., Quinley, R., Redo, D., and Avis, J. (2001). "Truck traffic analysis using WIM Data in California." Draft Rep. Univ. of California-Berkeley, Pavement Research Center, Richmond, Calif.
19. Mahoney, J., Lary, J. A., Pierce, L. M., Jackson, N. C., and Barenberg, E. J. (1991). "Urban interstate Portland cement concrete pavement rehabilitation alternatives for Washington State." Washington State Dept. of Transportation Rep. No. WA-RD 202.1, Seattle.
20. Miner, M. A. (1945). "Cumulative damage in fatigue." Trans. ASME, 12(3), A159-A164.
21. Murdock, J. W., and Kesler, C. E. (1958). "Effect of range of stress on fatigue strength of plain concrete beams." J. Am. Concr. Inst., 30(2), 221-231.
22. Packard, R. G. (1984). Thickness design for concrete highway and street pavements, Portland Cement Association, Skokie, Ill.
23. Poblete, M., Salsilli, R., Valenzuela, R., Bull, A., and Spratz, P. (1988). "Field evaluation of thermal deformations in undoweled PCC pavement slabs." Transportation Research Record P. 1207, Transportation Research Board, Washington, D.C., 217-228.
24. Rao, C. B., Barenberg, E. J., Snyder, M. B., and Schmidt, S. K. (2001). "Effects of temperature and moisture on the response of jointed concrete pavements." Proc., 7th Int. Conf. on Concrete Pavements, Orlando, Fla., Vol. 1, International Society for Concrete Pavements, Elliot City, Md., 23-38.
25. Rao, S., and Roesler, J. R. (2003). "Analysis and estimation of effective built-in temperature difference for North Tangent slabs." Draft Rep. to Univ. of California-Berkeley Pavement Research Center, Univ. of Illinois, Urbana, Ill.
26. Roesler, J. R., Harvey, J. T., Farver, J., and Long, F. (2000). "Investigation of design and construction issues for long life concrete pavement strategies." Final Rep., FHWA/CA/OR-2000/ 04, Univ. of California-Berkeley, Pavement Research Center, Richmond, Calif.
27. Rufino, D. M. (2003). "Mechanistic analysis of in-service airfield concrete pavement responses." PhD thesis, Univ. of Illinois, Urbana, Ill.
28. Smith, K. D., Wade, M. J., Peshkin, D. G., Khazanovich, L., Yu, H. T., and Darter, M. I. (1996). "Performance of concrete pavements; Vol. II - Evaluation of in-service concrete pavements." FHWA-RD-95-110, Federal Highway Administration, Washington, D.C.
29. Tepfers, R. (1979). "Tensile fatigue strength of plain concrete." J. Am. Concr. Inst., 76(8), 919-933.
30. Tepfers, R., and Kutti, T. (1979). "Fatigue strength of plain, ordinary, and lightweight concrete." J. Am. Concr. Inst., 76, 635-652.
31. Westergaard, H. M. (1947). "New formulas for stresses in concrete pavements for airfields." Trans. ASME, 73, 425-444.
32. Yu, H. T., and Khazanovich, L. (2001). "Effects of construction curling on concrete pavement behavior." Proc., 7th Int. Conf. on Concrete Pavements, Orlando, Fla., Vol. 1, International Society for Concrete Pavements, Elliot City, Md., 55-68.
33. Yu, H. T., Khazanovich, L., Darter, M. I., and Ardani, A. (1998). "Analysis of concrete pavement responses to temperature and wheel loads measured from instrumented slabs." Transportation Research Record 1639, Transportation Research Board, Washington, D.C., 94-101.
34. Zollinger, D. G., and Barenberg, E. J. (1989). "Proposed mechanistic based design procedures for jointed concrete pavements." Rep. No. FHWA/IL/U1225, Univ. of Illinois at Urbana-Champaign, Ill.