Reinforcing steel strains measured by Bragg grating sensors

Journal of Materials in Civil Engineering

Volumn 17, Issue 4, 2005, Pages 423-431

  Kenel, Albin ^a   Nellen, Philipp ^b   Frank, Andreas ^c   Marti, Peter ^d  

^a Landscape Architecture   (Switzerland)

^b SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^c ABB CORPORATE RESEARCH   (Switzerland)

^d ETH ZURICH   (Switzerland)

Author keywords

Bonding strength; Concrete; Cracking; Deflection; Reinforcement; Sensors; Strain measurement

Indexed keywords

BARS (METAL); BENDING STRENGTH; BOND STRENGTH (MATERIALS); CONCRETE BEAMS AND GIRDERS; CONCRETE REINFORCEMENTS; CRACK PROPAGATION; FIBER BRAGG GRATINGS; MATHEMATICAL MODELS; OPTICAL SENSORS; SHEAR STRESS; STRAIN MEASUREMENT;

BOND PROPERTIES; BRAGG GRATING SENSORS; CRACK SPACINGS; DEFLECTION; REINFORCING STEEL; STRAIN GRADIENTS; STRESS-SLIP MODELS;

STEEL;

REINFORCEMENT; STEEL;

EID: 25444461359     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2005)17:4(423)     Document Type: Article

References (23)

1. Abrams, D. A. (1913). "Tests of bond between concrete and steel." Bulletin No. 71, Engineering Experiment Station, Univ. of Illinois, Urbana, Ill.
2. Alvarez, M. (1998). "Einfluss des Verbundverhaltens auf das Verformungsvermögen von Stahlbeton [Influence of bond behavior on the deformation capacity of structural concrete]." IBK Rep. No. 236, Institute of Structural Engineering, ETH, Zurich (in German).
3. Bertholds, A., and Dändliker, R. (1988). "Determination of the individual strain-optic coefficients in single-mode optical fibers." J. Lightwave Technol., 6(1), 17-20.
4. Comité Euro-International du Béton (CEB-FIP). (1993). Model code for concrete structures, Lausanne, Switzerland.
5. Chen, W. F. (1970). "Double punch test for tensile strength of concrete." ACI J., 67(12), 993-995.
6. Fédération Internationale du Béton. (2000). "Bond of reinforcement in concrete." Bulletin 10: State-of-the-Art Rep., Lausanne, Switzerland.
7. Froggatt, M., and Moore, J. (1998). "Distributed measurement of static strain in an optical fiber with multiple Bragg gratings at nominally equal wavelengths." Appl. Opt., 37(10), 1741-1746.
8. Hill, K. O., and Meltz, G. (1997). "Fiber Bragg grating technology fundamentals and overview." J. Lightwave Technol., 15(8), 1265-1276.
9. Kenel, A. (2002). "Biegetragverhalten und Mindestbewehrung von Stahlbetonbauteilen [Flexural behavior and minimum reinforcement of structural concrete members]." IBK Rep. No. 277, Institute of Structural Engineering, ETH, Zurich (in German).
10. Kenel, A., and Marti, P. (2002). "Faseroptische Dehnungsmessungen an einbetonierten Bewehrungsstäben [Fiber-optic steel strain measurements on embedded reinforcing bars]." IBK Rep. No. 271, Institute of Structural Engineering, ETH, Zurich (in German).
11. Kuuskoski, V. (1950). "Über die Haftung zwischen Beton und Stahl [On the adhesion between concrete and steel]." PhD thesis, Technical Univ. of Finland, Helsinki, Finland (in German).
12. Lahnert, B. J., Houde, J., and Gerstle, K. H. (1986). "Direct measurement of slip between steel and concrete." ACI J., 83(6), 974-982.
13. Mains, R. M. (1951). "Measurement of the distribution of tensile and bond stresses along reinforcing bars." ACI J., 48(3), 225-252.
14. Marti, P. (1989). "Size effect in double punch tests on concrete cylinders." ACI Mater J., 86(6), 597-601.
15. Marti, P. (2001). "Stahlbeton Grundzüge [Structural concrete fundamentals]." Lecture Notes, Institute of Structural Engineering, ETH, Zurich (in German).
16. Marti, P., Alvarez, M., Kaufmann, W., and Sigrist, V. (1998). "Tension chord model for structural concrete." Struct. Eng. Int. (IABSE, Zurich, Switzerland) 8(4), 287-298.
17. Mohr, O. (1868). "Beiträge zur Theorie der Holz - und Eisenkonstruktionen, Behandlung der elastischen Linie als Seillinie; zeichnerische Untersuchung des elastischen Balkens [Contributions to the theory of timber and steel structures. Treating the deflection curve as a funicular polygon; graphical analysis of the elastic beam]." Zeitschrift des Architekten- und Ingenieur-Vereins zu Hannover, 14, 19-51 (in German).
18. Rehm, G. (1961). "Über die Grundlagen des Verbundes zwischen Stahl und Beton [On the bases of bond between steel and concrete]." Deutscher Ausschuss für Stahlbeton, 138 (in German).
19. Sennhauser, U., and Nellen, P. M. (2000). "Reliability of fiber optic sensors." Trends in optical non-destructive testing and inspections, P. Rastogi and D. Inaudi, eds., Elsevier, New York, 473-485.
20. Shima, H., Chou, L.-L., and Okamura, H. (1987). "Micro and macro models for bond in reinforced concrete." J. Fac. Eng., Univ. Tokyo, 39(2), 133-194.
21. Sigrist, V. (1995). "Zum Verformungsvermögen von Stahlbetonträgern [On the deformation capacity of structural concrete beams]." IBK Rep. No. 210, Institute of Structural Engineering, ETH, Zurich (in German).
22. Sirkis, J. S. (1993). "Unified approach to phase-strain-temperature models for smart structure interferometric optical fiber sensors. Part 1: Development; Part 2: Applications." Opt. Eng. (Bellingham), 32(4), 752-772.
23. Watstein, D. (1947). "Distribution of bond stress in concrete in pull-out specimens." ACI J., 44(5), 1041-1052.