Recent Trends in EDM/ECM Technologies in Japan

VDI Berichte

Volumn , Issue 1405, 1998, Pages

  Masuzawa, T ^a   Takawashi, T ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 2542562165     PISSN: 00835560     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Article

References (67)

1. T. Masuzawa, H.K. Toenshoff; Three-Dimensional Micromachining by Machine Tools, Annals of the CIRP, 46, 2 (1997) 621-628
2. H. Narumiya, N. Mohri, N. Saito, H. Ootake, Y. Tsunekawa, T. Takawashi, K. Kobayashi; EDM by Powder Suspended Working Fluid, Proc. of ISEM 9 (1989) 5-8
3. N. Mohri, N. Saito, H. Narumiya, H. Kawatsu, Y. Ozaki, K. Kobayashi, Y. Tsunekawa; Finish Machining by EDM Using Powder Suspended Working Fluid, Journal or JSEME, 25, 49 (1991) 47-60 (in Japanese)
4. Y. Uno, A. Okada; Surface Generation Mechanism in Electrical Discharge Machining with Silicon Powder Mixed Fluid, IJEM No. 2 (1997) 13-18
5. N. Mohri, N. Saito, T. Takawashi, K. Kobayashi; Mirror-Like Finishing by EDM, Proc. of 25th MTDR (1985) 329-336
6. M. Yoshida, M. Kunieda; Improvement of Removal Rate of the EDM in Gas, Proc. of Annual Meeting of JSEME (1995) 129-132 (in Japanese)
7. M. Yoshida, M. Kunieda; Micromachining by EDM in Air, Proc. of Annual Meeting of JSEME (1996) 78-80 (in Japanese)
8. M. Kunieda, M. Yoshida; Electrical Discharge Machining in Gas, Annals of the CIRP, 46, 1 (1997) 143-146
9. M. Yoshida, M. Kunieda; Micromachining of WC Alloy by EDM in Air, Proc. of Annual Spring Assembly of JSPE (1997) 259-260 (in Japanese)
10. M. Yoshida, M. Kunieda; Measurement of Machining Gap in EDM in Air, Proc. of Annual Meeting of JSEME (1997) 75-78 (in Japanese)
11. T. Masuzawa, M. Fujino, K. Kobayashi; Wire Electro-discharge Grinding for Micro-Machining, Annals of the CIRP, 34, 1 (1985) 431-434
12. T. Masuzawa, M. Fujino; A Process for Manufacturing Very Fine Pin Tools, SME Technical Paper, MS90-307 (1990) 1-12
13. T. Masuzawa, M. Fujino; Precision Machining of Micro Spindles (1st Report) - Development of Wire Eiectrodischarge Grinding Method -, Journal of JSEME, 24, 48 (1991) 14-23 (in Japanese)
14. M. Fujino, T. Masuzawa, K. Kanazawa, Precision Machining of Micro Spindles (2nd Report) - Machining of Various Spindles -, Journal of JSEME, 25, 49 (1991) 1-8 (in Japanese)
15. H.H. Langen, T. Masuzawa, M. Fujino; Reverse Micro-EDM and its Applicability to Microassembly, IJEM No. 2 (1997) 53-57
16. N. Nebashi, K. Wakabayashi, M. Yamada, T. Masuzawa; Large Area Precision Machining by Wire Electrodischarge Grinding Method (First Report) - Fundamental Machining Characteristics of Brass -, IJEM No. 2 (1997) 35-40
17. N. Nebashi, K. Wakabayashi, M. Yamada, T. Masuzawa; In-Process Truing /Dressing of Grinding Wheels by WEDG and ELID, IJEM No. 3 (1998) 59-64
18. H. Kurafuji, T. Masuzawa; EDM of microholes in cemented carbide alloys, Proc. of Annual Autumn Assembly of JSPE (1967) 77-78 (in Japanese)
19. H. Kurafuji, T. Masuzawa; Micro-EDM of Cemented Carbide Alloys, Journal of JSEME, 2, 3 (1968) 1-16 (in Japanese)
20. H. Kurafuji and T. Masuzawa; Micro-Energy EDM of Cemented Carbide Alloys, Bulletin of JSPE, 3, 1 (1969) 11-12
21. K. Kawata, T. Sato, T. Masaki, T. Masuzawa; Study on Micro-EDM (2nd Report) - Development of Prototype Machines and Experiments on Working Conditions -, Journal of JSEME, 28, 58 (1994) 38-48 (in Japanese)
22. K. Kawata, T. Masaki, T. Sato, T. Masuzawa; Study on Micro-EDM (3rd Report) - Fabrication of Micromechanical Elements -, Journal of JSEME, 28, 59 (1994) 1-10 (in Japanese)
23. M. Fujino, N. Okamoto, T. Masuzawa; Development of Multi-Purpose Microprocessing Machine, Proc. of ISEM XI (1995) 613-620
24. T. Sato, T. Masuzawa, M. Fujino, Y. Onishi; Application of WEDG for Microdrilling and Microendmilling, Proc. of Annual Spring Assembly of JSPE (1989) 1091-1092 (in Japanese)
25. T. Masuzawa, M. Yamamoto, M. Fujino; A Micro-punching System using Wire-EDM and EDM, Proc. of ISEM IX (1989) 86-90
26. X.-Q. Sun, T. Masuzawa, M. Fujino, K. Egashira; Micro USM of Brittle Materials, Asian Electrical Machining Symposium '95 (1995) 31-36
27. K. Egashira, T. Masuzawa, M. Fujino, X.-Q. Sun; Application of USM to Micro machining by On-the Machine Tool Fabrication, IJEM No. 2 (1997) 31-36
28. T. Masuzawa, C.-L. Kuo, M. Fujino; A Combined Electrical Machining Process for Micronozzle Fabrication, Annals of the CIRP, 43, 1 (1984) 189-192
29. Z. Yu, T. Masuzawa, M. Fujino; 3D Micro-EDM with Simply Shaped Electrode, Proc. of 3rd France-Japan & 1st Europe-Asia Congress on Mechatronics (1996) 519-523
30. T. Yuzawa, T. Magara, Y. Imai, T. Sato; Micro Shape Generating EDM with Slim Electrodes, Proc. of Annual Meeting of JSEME (1997) 65-66 (in Japanese)
31. Z. Yu, T. Masuzawa, M. Fujino; 3D EDM Using Simple Electrodes - Application of Uniform Wear Method to Normal Size Molds -, Proc. of Annual Meeting of JSEME (1997) 67-70 (in Japanese)
32. Z. Yu, T. Masuzawa, M. Fujino; 3D Micro-EDM with Simply Shaped Electrode (1st Report), Journal of JSEME, 31, 66 (1997) 18-24 (in Japanese)
33. Z. Yu, T. Masuzawa, M. Fujino; 3D Micro-EDM with Simply Shaped Electrode (2nd Report), Journal of JSEME, 31, 67 (1997) 14-22 (in Japanese)
34. Z. Yu, T. Masuzawa, M. Fujino; 3D Micro-EDM with Simple Shape Electrode, part 1 - Machining of Cavities with Sharp Corners and Electrode Wear Compensation -, IJEM No. 3 (1998) 7-12
35. Z. Yu, T. Masuzawa, M. Fujino; 3D Micro-EDM with Simple Shape Electrode, part 2 - Machining and Error Analysis of Conical and Spherical Cavities -, IJEM No. 3 (1998) 71-78
36. T. Yuzawa, T. Magara, A. Goto, Y. Imai, T. Sato, T. Sendai; Contouring Micro-EDM Using a Slim Electrode, Denki Kako Gijutsu, 19, 63 (1995) 1-6 (in Japanese)
37. Y. Fukuzawa, E. Iwane, N. Mohri; Machining of Ceramics by EDM Machine, Proc. of Annual Meeting of JSEME (1993) 63-66 (in Japanese)
38. Y. Fukuzawa, T. Tani, E. Iwane, N. Mohri; Some Machining Methods of Insulating Materials by an Electrical Discharge Machine, Journal of JSEME, 29, 60 (1995) 11-21 (in Japanese)
39. Y. Fukuzawa, T. Tani, Y. Ito, Y. Ichinose, N. Mohri; Electrical Discharge Machining (EDM) of Insulator Ceramics with a Sheet of Metal Mesh, Proc. of ISEM XI (1995) 173-179
40. Y. Fukuzawa, J. Ariyoshi, T. Tani, N. Mohri; Machining of Insulating Ceramics by Wire Electrical Discharge Machine, Proc. of Annual Meeting of JSEME (1995) 97-98(in Japanese)
41. T. Tani, Y. Fukuzawa, J. Ariyoshi, T. Konagayoshi, N. Mohri; Machining of Insulating Ceramics by EDM Method Using the Rotational Electrode, Proc. of Annual Meeting of JSEME (1995) 103-106 (in Japanese)
42. N. Mohri, Y. Fukuzawa, T. Tani, N. Saito, K. Furutani; Assisting Electrode Method for Machining Insulating Ceramics, Annals of the CIRP, 45, 1 (1996) 201-204
43. T. Hatayama, Y. Fukuzawa, N. Mohri, K. Furutani, J. Ariyoshi; Machining of Insulating Ceramics by Wire Electrical Discharge Machine (2nd Report) - Influence of Machining Condition and Wire Material -, Proc. of Annual Meeting of JSEME (1996) 75-77 (in Japanese)
44. Y. Furukawa, N. Mohri, T. Tani; Electrical Discharge Machining Phenomena of Insulating Sialon Ceramics with an Assisting Electrode, IJEM No. 2 (1997) 25-30
45. T. Tani, Y. Fukuzawa, H. Horibata, T. Kawase, K. Furutani, N. Mohri; EDM Characteristics for Oxide Ceramics - Effect of Carbon Electrode -, Proc. of Annual Meeting of JSEME (1997) 93-96 (in Japanese)
46. H. Katogi, Y. Fukuzawa, N. Mohri, K. Furutani, T. Tani; EDMed surface of Insulating Ceramics, Proc. of Annual Meeting of JSEME (1997) 97-98 (in Japanese)
47. M. Kosuga, , H. Yamada, N. Mohri, K. Furutani, Y. Fukuzawa, T. Tani; Machining Phenomena in EDM of Insulating Ceramics, Proc. of Annual Meeting of JSEME (1997) 99-102 (in Japanese)
48. T. Hatayama, Y. Fukuzawa, N. Mohri, K. Furutani; Machining Characteristics of Insulating Ceramics Using Micro-EDM Machine, Proc. of Annual Meeting of JSEME (1997) 103-104 (in Japanese)
49. 2 Ceramic through Batch Process Using Auxiliary Electrode, Proc. of Annual Spring Assembly of JSPE (1997) 277-278 (in Japanese)
50. N. Mohri, N. Saito, M. Suzuki; Surface Modification by EDM, Proc. of the Winter Annual Meeting of the ASME, vol. 34 (1988) 21-30
51. N. Mohri, N. Saito, Y. Tsunekawa; Metal Surface Modification by Electrical Discharge Machining with Composite Electrode, Annals of the CIRP, 42, 1 (1993) 219-222
52. K. Masui, K. Demizu, Y. Sato, T. Sone; Surface Modification of Tool Steels by Alloying Method Using EDM Process, Proc. of ISEM XI (1995) 419-426
53. H. Sunada, N. Mohri, N. Saito, Observation of Metal Surface Modification by Electrical Discharge Machining, Proc. of Annual Meeting of JSEME (1995) 63-66 (in Japanese)
54. A. Goto, T. Magara, S. Imai, H. Miyake, N. Saito, N. Mohri; Formation of Hard Layer on Metallic Material by EDM, Journal of JSEME 31, 68 (1995) 26-31 (in Japanese)
55. A. Goto, T. Magara, T. Moro, H. Miyake, N. Saito, N. Mohri; Hard Film Formation on Surfaces by Electrical Discharge in Liquid, Proc. of Annual Meeting of JSEME (1997) 1-4 (in Japanese)
56. H. Miyake, Y. Imai, A. Goto, T. Magara, N. Saito, N. Mohri; Improvement of the Life of Cutting Tools by Electrical Discharge in Liquid, Proc. of Annual Meeting of JSEME (1997) 5-6 (in Japanese)
57. H. Minami, K. Masui, Y. Kitaguchi, H. Oyama, H. Tsukahara; Surface Coloring of Ti Alloy by EDM, Proc. of Annual Meeting of JSEME (1996) 111-114 (in Japanese)
58. H. Minami, K. Masui, H. Tsukahara, H. Ogino; Surface Coloring of Ti Alloy by EDM (2nd Report) - Analysis of Coloring Mechanism -, Proc. of Annual Meeting of JSEME (1997) 17-20 (in Japanese)
59. T. Masuzawa, S. Sakai; Quick Finishing of WEDM Products by ECM Using a Mate Electrode, Annals of the CIRP, 36, 1 (1987) 123-126
60. S. Sakai, T. Masuzawa, S. Ito; ECM Finishing of Surface Products by EDM, Proc. of ISEM IX (1989) 155-158
61. T. Masuzawa, M. Kimura; Electrochemical Surface Finishing of Tungsten Carbide Alloy, Annals of the CIRP, 40, 1 (1991) 199-202
62. Y. Kuwahara, K. Asaoka; Electrochemical Surface Finishing with a Simple Shape Electrode, Proc. of Annual Meeting of JSEME (1996) 35-38 (in Japanese)
63. K. Namiki, S. Sakai, T. Masuzawa, M. Fujino; ECM Finishing of Microholes, Proc. of Annual Meeting of JSEME (1996) 29-32 (in Japanese)
64. M. Kunieda, M. Yoshida, H. Yoshida; Influence of Microindents Formed by Electrochemical Jet Machining on Rolling Bearing Fatigue Life, Manufacturing Science and Engineering, PED-Vol. 64, H00861, ASME (1993) 693-699
65. K. Yoneda, M. Kunieda; Numerical Analysis of Cross Sectional Shape of Micro-Indents Formed by the Electrochemical Jet Machining (ECJM), Journal of JSEME 29, 62 (1995) 1-8 (in Japanese)
66. Y. Mori, R. Kato, M. Yoshida, M. Kunieda; 3D Machining of Metal Parts by Electrochemical Jet Machining, Proc. of Annual Meeting of JSEME (1997) 61-64 (in Japanese)
67. Y. Mori, M. Kunieda; Coloring of Titanium Surface by Electrochemical Jet Treatment, Proc. of Annual Meeting of JSEME (1997) 13-16 (in Japanese)