Hydrogen-involved tensile and cyclic deformation behavior of low-alloy pressure vessel steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 5, 2004, Pages 1477-1486

  Wu, Xinqiang ^a   Katada, Yasuyuki ^a   Lee, Sang G ^b,c   Kim, In S ^b  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^c PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; DEFORMATION; FATIGUE OF MATERIALS; PRESSURE EFFECTS; STRAIN RATE; TENSILE PROPERTIES; THERMAL EFFECTS;

DYNAMIC STRAIN AGING; LOW ALLOY PRESSURE VESSEL STEEL;

STEEL;

EID: 2542541250     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0256-8     Document Type: Article

References (54)

1. G.R. Sunaryo, Y. Katsumura, and K. Ishigure: Radiat. Phys. Chem., 1995, vol. 45, pp. 703-14.
2. R.G. Sowden: J. Nucl. Mater., 1963, vol. 8, pp. 81-101.
3. D.R. Harries and G.H. Broomfield: J. Nucl. Mater., 1963, vol. 9, pp. 327-38.
4. G.H. Broomfield: J. Nucl. Mater., 1965, vol. 16, pp. 249-59.
5. J.K. Chakravartty, G.E. Prasad, T.K. Sinha, and M.K. Asundi: J. Nucl. Mater., 1986, vol. 138, pp. 107-16.
6. H. Hänninen, W. Cullen, and M. Kemppainen: Corrosion, 1990, vol. 46, pp. 563-73.
7. T.K. Yeh and F. Chu: Nucl. Sci. Eng., 2001, vol. 139, pp. 221-33.
8. D.D. Macdonald: Corrosion, 1992, vol. 48, pp. 194-205.
9. K. Ishigure, J. Takagi, and H. Shiraishi: Radiat. Phys. Chem., 1987, vol. 29, pp. 195-99.
10. E. Ibe, M. Nagase, M. Sakagami, and S. Uchida: J. Nucl. Sci. Technol., 1987, vol. 24, pp. 220-26.
11. E. Ibe, M. Sakagami, and S. Uchida: J. Nucl. Sci. Technol., 1986, vol. 23, pp. 11-28.
12. G.R. Caskey, A.H. Dexter, M.L. Holzworth, M.R. Louthan, and R.G. Derrick: Corrosion, 1976, vol. 32, pp. 370-374.
13. N. Nagata, S. Sato, and Y. Katada: Iron Steel Inst. Jpn. Int., 1991, vol. 31, pp. 106-14.
14. I.G. Park and A.W. Thompson: Metall. Trans. A, 1990, vol. 21A, pp. 465-77.
15. I.S. Kim and S.S. Kang: Int. J. Press. Ves. Piping, 1995, vol. 62, pp. 123-29.
16. H.J. Maier, W. Popp, and H. Kaesche: Mater. Sci. Eng., 1995, vol. A191, pp. 17-26.
17. L. Fournier, D. Delafosse, and T. Magnin: Mater. Sci. Eng., 1999, vol. A269, pp. 111-19.
18. M. Beghini, G. Benamati, L. Bertini, I. Ricapito, and R. Valentini: J. Nucl. Mater., 2001, vol. 288, pp. 1-6.
19. T.D. Le and I.M. Bernstein, Acta Metall. Mater., 1991, vol. 39, pp. 363-72.
20. O.K. Chopra and W.J. Shack: J. Press. Ves. Technol., 1999, vol. 121, pp. 49-60.
21. D.J. Gavenda, P.R. Luebbers, and O.K. Chopra: Fatigue Fract. J., 1997, vol. 350, pp. 243-55.
22. H. Hänninen, K. Torronen, M. Kemppainen, and S. Salonen: Corr. Sci., 1983, vol. 23, pp. 663-79.
23. J. Kuniya, H. Anzai, and I. Masaoka: Corrosion, 1992, vol. 48, pp. 419-25.
24. F.P. Ford, D.F. Taylor, P.L. Andresen, and R.G. Ballinger: EPRI NP-5064M, Project 2006-6, Final Report, Electric Power Research Institute, Palo Alto, CA, 1987.
25. G. Gabetta: Fatigue Fract. Eng. Mater. Struct., 1987, vol. 10, pp. 373-83.
26. K. Torronen and M. Kemppainen: ASTM STP 801, ASTM, Philadelphia, PA, 1983, pp. 287-318.
27. K.A. Esaklul and W.W. Gerberich: Scripta Metall., 1983, vol. 17, pp. 1079-82.
28. K. Jatavallabhula and W.W. Gerberich: Fatigue Fract. Eng. Mater. Struct., 1981, vol. 4, pp. 173-78.
29. R.A. Oriani and P.H. Josephic: Metall. Trans. A, 1980, vol. 11A, pp. 1809-20.
30. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861-90.
31. R. Garber, I.M. Bernstein, and A.W. Thompson: Metall. Trans. A, 1981, vol. 12A, pp. 225-34.
32. J.K. Lin and R.A. Oriani: Acta Metall., 1983, vol. 31, pp. 1071-77.
33. H.J. Maier and H. Kaesche: Mater. Sci. Eng., 1989, vol. A117, pp. L11-L15.
34. H.E. Hanninen, T.C. Lee, I.M. Robertson, and H.K. Birnbaum: J. Mater. Eng. Performance, 1993, vol. 2, pp. 807-17.
35. Y. Jagodzinski, H. Hänninen, O. Tarasenko, and S. Smuk: Scripta Mater., 2000, vol. 43, pp. 245-51.
36. G.P. Tiwari, A. Bose, J.K. Chakravartty, S.L. Wadekar, M.K. Totlani, R.N. Arya, and R.K. Fotedar: Mater. Sci. Eng., 2000, vol. A286, pp. 269-81.
37. V.I. Shvachko: Int. J. Hydrogen Energy, 2000, vol. 25, pp. 473-80.
38. O.N. Senkov and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, 1877-87.
39. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng., 1994, vol. A176, pp. 191-202.
40. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1998, vol. 46, pp. 1749-57.
41. I.M. Robertson: Eng. Fract. Mech., 1999, vol. 64, pp. 649-73.
42. P. Sofronis and I.M. Robertson: Phil. Mag., 2002, vol. A82, pp. 3405-13.
43. B.H. Lee and I.S. Kim: J. Nucl. Mater., 1995, vol. 226, pp. 216-25.
44. Y. Katada and N. Nagata: Corr. Sci., 1985, vol. 25, pp. 693-704.
45. F.P. Ford: J. Press. Ves. Technol., 1988, vol. 110, pp. 113-28.
46. Y. Katada, N. Nagata, and S. Sato: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 877-83.
47. O.K. Chopra and W.J. Shack: Nucl. Eng. Design, 1998, vol. 184, pp. 49-76.
48. Y. Katada and K. Kurosawa: ASME PVP, 1999, vol. 386, pp. 249-54.
49. S.G. Lee and I.S. Kim: J. Nucl. Sci. Technol., 2001, vol. 38, pp. 120-26.
50. X.Y. Zhou, J. Congleton, and A. Bahraloloom: Corrosion, 1998, vol. 54, pp. 898-909.
51. T.D. Le and B.E. Wilde: Corrosion, 1983, vol. 39 (7), pp. 258-65.
52. J.D. Atkinson and J. Yu: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20, pp. 1-12.
53. A. Saxena: Nonlinear Fracture Mechanics for Engineers, CRC press, New York, NY, 1998, p. 303.
54. S. Suresh, G.F. Zamiski, and R.O. Ritchie: Metall. Trans. A, 1981, vol. 12A, pp. 1435-43.