Constitutive relations for soil materials

Electronic Journal of Geotechnical Engineering

Volumn 1, Issue , 1996, Pages

  Prevost, Jean H ^a   Popescu, Radu ^a  

^a PRINCETON UNIVERSITY   (United States)

Author keywords

Constitutive theory; Elastic plastic; In situ soil tests; Parameter calibration; Soil liquefaction; Stochastic finite elements; Strain localization

Indexed keywords

ELASTOPLASTICITY; LIQUEFACTION; SOIL MECHANICS;

EID: 2542493833     PISSN: 10893032     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (230)

1. Aboim, C.A. and W.H. Roth. (1982), Bounding- Surface Theory Applied to Cyclic Loading of Sands. Int. Symp. Num. Models in Geom., Balkema Publ., Rotterdam, pp. 65-80.
2. Adachi, T. and F. Oda. (1982), Consititutive Equations for Normally Constituted Clay Based on Elasto-Visco- Plasticity. Soils and Foundations, Vol. 22, No. 4, pp. 57-70.
3. Allen, M.P. and D.J. Tildesley. (1987), Computer Simulation of Liquids, Clarendon Press, Oxford.
4. Arulanandan, K. and R.F. Scott, editors. (1993), Proc. Int. Conf. on Verif. Numerical Proc. for the Analysis of Soil Liq. Problems, volume 1. Balkema, Rotterdam.
5. Arulanandan, K. and R.F. Scott, editors. (1994), Proc. Int. Conf. on Verif. Numerical Proc. for the Analysis of Soil Liq. Problems, volume 2. Balkema, Rotterdam.
6. Aubry, D., J.C. Hujeux, F. Lassoudiere and Y. Meimon. (1982), A Double Memory Model with Multiple Mechanisms for Cyclic Soil Behavior. Proc., Int. Symp. Num. Methods in Geomech..
7. Baladi, G.Y. and B. Rohani. (1979), Elastic-plastic model for saturated sand. J. Geotech. Engnrg. Div. ASCE, 105(GT4):465-480.
8. Baldi, G., R. Bellotti, V. Ghionna, and M. Jamiolkowski. (1989), Stiffness of sands from CPT, SPT and DMT - a critical review. In Proc. Geotechn. Conf. "Penetration Testing in the UK", pages 299-305, Birmingham, Inst. Civil Engineers.
9. Baldi, G., R. Bellotti, M. Jamiolkowski, and E. Pasqualini. (1982), Design parameters for sand from CPT. In Proc. European Symp. on Penetration Testing, volume 2, pages 425-432, Amsterdam.
10. Bardet, J.P. (1990), Hypoplastic Model for Sands. J. Eng. Mech., ASCE, Vol. 116, pp. 1973-1994.
11. Bardet, J.P. (1986), Bounding Surface Plasticity Model for Sands. J. Eng. Mech., ASCE, Vol. 112, pp. 1198- 1217.
12. Bashir, Y.M. and J.D. Goddard. (1991), A Novel Simulation Method for the Quasi-Static Mechanics of Granular Assemblages. J. Rheol., Vol. 35, No. 5, pp. 849-885.
13. Bazant, Z.P. (1984), Intricate Continuum and Its Variational Derivation. J. Mech. Eng. Div., ASCE, Vol. 110, pp. 1693-1712.
14. Bazant, Z.P. and R.J. Krizek. (1976), Endochronic Constitutive Law for Liquefaction of Sand. J. Eng. Mech. Div., ASCE, Vol. 102, No. EM2, pp. 225-238.
15. Been, K, and M.G. Jefferies. (1985), A state parameter for sands. Geotechnique, 35(2):99-112.
16. Been, K,, M.G. Jefferies, J.H.A. Crooks, and L. Rothenburg. (1987), The cone penetration test in sands: Part II, general inference of state. Geotechnique, 37(3):285-299.
17. Been, K,, B.E. Lingnau, L.H.A. Crooks, and B. Leach. (1987), Cone penetration test calibration for Erksak (Beaufort Sea) sand. Can. Geotech. Journ., 24:601-610.
18. Bellotti, R., V. Ghionna, M. Jamiolkowski, R. Lancellotta, and G. Manfredini. (1986), Deformation characteristics of cohesionless soils from in-situ tests. In S.P. Clemence, editor, Use of In-Situ Tests in Geotechnical Engineering, pages 47-73. ASCE, New York.
19. Bendat, J.S. and A.G. Piersol. (1986), Random Data, Analysis and Measurement Procedures. Wiley-Interscience, New York, 2nd edition.
20. Biot, M.A. (1978), Variational Irreversible Thermodynamics of Heat and Mass Transfer in Porous Solids: New Concepts and Methods. Quarterly of Applied Mathematics, Vol. 36, pp. 19-38.
21. Biot, M.A. (1977), Variational Lagrangian Thermodynamics of Non-Isothermal Finite Strain Mechanics of Porous Solids and Thermomolecular Diffusion. Int. J. Solids Struct., ASCE, Vol. 13, pp. 579-597.
22. Biot, M.A. (1972), Theory of Finite Deformations of Porous Solids. Indiana University Mathematics Journal, Vol. 21, No. 7, pp. 597-620.
23. Biot, M.A. and D.G. Willis. (1957), The Elastic Coefficients of a Theory of Consolidation. J. Applied Mechanics, ASME, Vol. 79, pp. 594-601.
24. Biot, M.A. (1956), Theory of Propagation of Elastic Waves in a Fluid-Saturated Porous Solid, I. Low Frequency Range. J. of the Acoustical Society of America. Vol. 28, pp. 168-178.
25. Biot, M.A. (1955), Theory of Elasticity and Consolidation for a Porous Anisotropic Solid. J. Applied Physics, Vol. 26, pp. 182-185.
26. Borja, R.I. and J.R. Wren. (1996), Micromechanical Basis of Continuum Models for Granular Materials. I: Theory. J. Geotech. Engrg., ASCE, in review.
27. Borja, R.I. and A.P. Amies. (1994), Multiaxial Cyclic Plasticity Model for Clays. J. Geotech. Eng. Div., ASCE, Vol. 120, pp. 1051-1070.
28. Bowden, R.M. (1982), Compressible porous media models by use of the theory of mixtures. Int. Journ. of Engnrg. Science, 20(6):697-735.
29. Campanella, R.G. (1994), Field methods for dynamic geotechnical testing: An overview of capabilities and needs. In Proc. Symp. on Dynamic Geotechnical Testing II, pages 3-23, San Francisco, CA.
30. Campanella, R.G. and M.A. Kokan. (1993), A new approach to measuring dilatancy in saturated sands. Geotechnical Testing Journal, ASTM GTJODJ, 16(4):485-495.
31. Campanella, R.G., W.P. Stewart, D. Roy, and M.P. Davies. (1994), Low strain characteristics of soils with the downhole seismic piezocone penetrometer. In Proc. Symp. on Dynamic Geotechnical Testing II, pages 73-87, San Francisco, CA.
32. Carter, J.P., M.F. Randolph and C.P. Wroth. (1979), Stress and Pore Pressure Changes in Clay During and After the Expansion of A Cylindrical Cavity. Int. J. Num. Meth. Eng., Vol. 3, pp. 305-322.
33. Castro, G. (1975), Liquefaction and cyclic mobility of saturated sands. J. Geotech. Eng. Div., ASCE, 101(GT6):551-569.
34. Chang, C.S., Y. Chang and M.G. Kabir. (1992), Micro-mechanical Modeling for Stress-strain Behavior of Granular Soils. J. Geotech. Eng. Div., ASCE, Vol. 118, No. 12, pp. 1959-1992.
35. Chen, W.F. (1975), Limit Analysis and Soil Plasticity, Developments in Geotechnical Engineering 7, Elsevier Scientific, Amsterdam.
36. Christoffersen, J., M.M. Mehrabadi and S. Nemat-Nasser. (1981), A Micro-mechanical Description of Granular Material Behavior. J. Appl. Mech., ASME, Vol. 48, No. 2, pp. 339-344.
37. Coon, M.D. and R.J. Evans. (1971), Recoverable Deformations of Cohesionless Soils. J. Soil Mech. Found. Eng., ASCE, Vol. 97, No. SM2, pp. 375-390.
38. Coulomb, C.A. (1972), Essai Sur Une Application des Regles de Maximis et Minimis A Quelques Problemes de Statique Relatifs A L'Architecture. Memoires par Divers Savants, Cambridge University Press, Cambridge, England.
39. Crouch, R. S. and J.P. Wolf. (1994), Unified 3D Critical State Bounding-surface Plasticity Model for Soils Incorporating Continuous Plastic Loading Under Cyclic Paths. Int. J. Numer. Anal. Meth. Geomech., Vol. 18, 735-784.
40. Cundall, P.A. and O.D.L. Strack. (1979), A Discrete Numerical Model for Granular Assemblies. Geotechnique, Vol. 29, pp. 47-65.
41. Cundall, P.A. (1971), A Computer Model for Simulating Progressive Large Scale Movements of Blocky Rock Systems. Proceedings, ASCE, Symp. Int. Soc. Rock. Mech., Nancy, France, Vol. 1, pp. 132-150.
42. Dafalias, Y.F. (1986), Bounding Surface Plasticity: Mathematical Foundation and Hypo-plasticity. J. Eng. Mech., ASCE, Vol. 112, No. 9, pp. 966-987.
43. Dafalias, Y.F. and L.R. Herrmann. (1980), A Bounding Surface Plasticity Model. Proc. Int. Symp. Soils Under Cyclic Trans. Load., Swansea, A.A. Balkema Publ., Rotterdam, pp. 335-345.
44. Dafalias, Y.F. and E.P. Popov. (1977), Cyclic Loading for Materials with a Vanishing Elastic Domain. Nucl. Eng. Design, Vol. 41. pp. 293-302.
45. Dafalias, Y.F. and E.P. Popov. (1975), A Model of Nonlinearly Hardening Materials for Complex Loading. Acta Mech., Vol. 23, pp. 173-192.
46. Das, B.M. (1983), Fundamentals of Soil Dynamics. Elsevier.
47. Davis, R.O., and G. Mullenger. (1978), A Rate-Type Constitutive Model for Soil with a Critical Shake. Int. J. Num. Analyt. Meth. Geom., Vol. 2, pp. 275-282.
48. Deb, A., J.H. Prevost and B. Loret. (1996a), Adaptive Meshing for Strain-Localization in Elasto-Visco-Plastic Solids. Comput. Methods Appl. Mech. Engrg., to appear.
49. Deb, A., B. Loret and J.H. Prevost. (1996b), Automated Band Identification Procedure for Dynamic Strain Localization. Comput. Methods Appl. Mech. Engrg., to appear.
50. DeGroot, D.J. and G.B. Baecher. (1993), Estimating autocovariance of in-situ soil properties. Journ. Geotechnical Engnrg., 119(1):147-166.
51. DiMaggio, F.L. and I.S. Sandler. (1971), Material models for granular soils, J. Engnrg. Mech. Div., ASCE, 97(EM3):935-950.
52. Douglas, B.J. and R.S. Olsen. (1981), Soil classification using electric cone penetrometer. In G.M. Norris and R.D. Holtz, editors, Cone Penetration Testing and Experience. ASCE, New York.
53. Drescher, A. and De Josselin de Jong. (1972), Photoelastic Verification of A Material Model for the Flow of A Granular Material. J. Mech. Phys. Solids., Vol. 20, pp. 337- 351.
54. Deresiewicz, H. (1958), Mechanics of granular material. Adv. Appl. Mech., 5:233-306.
55. Drucker, D.C., R.E. Gibson and D.J. Henkel. (1955), Soil Mechanics and Work-Hardening Theories of Plasticity. Proceedings, ASCE, Vol. 81, pp. 1-14.
56. Drucker, D.C. and W. Prager. (1952), Soil Mechanics and Plastic Analysis or Limit Design. Quarterly of Applied Mathematics, Vol. 10, pp. 157-165.
57. Duncan, J.M. and C.Y. Chang. (1970), Nonlinear analysis of stress and strain in soils. Journ. Soil Mech. and Found. Div., ASCE, 96(SM5):1629-1653.
58. The Earth Technology Corporation. (1992), VELACS laboratory testing program soil data report. Technical report, Earth Technology Project No. 90-0562.
59. Eringen, A.C. and J.D. Ingram. (1967), A Continuum Theory of Chemically Reacting Media (parts I and II). Int. J. of Engineering Science, Vol. 3, pp. 197-212 and Vol. 5, pp. 289-322.
60. Eurocode 7: Geotechnical design. (1994), Technical Report ENV 1997-1, European Committee for Standardization.
61. Fear, C.E. and E.C. McRoberts. (1995), Reconsideration of initiation of liquefaction in sandy soils. Journ. Geotechnical Engnrg., 121(3):249-261.
62. Fenton, G.A. and D.V. Griffiths. (1996), Stochastics of free surface flow through stochastic earth dam. Journ. Geotechnical Engnrg., 122(6):427-436.
63. Finn, W.D.L., K.W. Lee and G.R. Martin. (1977), An Effective Stress Model for Liquefaction. ASCE J. Geot. Eng. Div., Vol. 103, pp. 517-533.
64. Fish, J. and T. Belytschko. (1990), A Finite Element With A Uni-Directionally Enriched Strain Field for Localization Analysis. Comput. Methods Appl. Mech. Engrg., Vol. 78, pp. 181-200.
65. Ghaboussi, J. and H. Momen. (1982), Modeling and Analysis of Cyclic Behavior of Sand. Soil Mechanics-Transient and Cyclic Loads, John Wiley & Sons, New York, pp. 313-342.
66. Goddard, J.D. (1990), Nonlinear Elasticity and Pressure-Dependent Wave Speeds in Granular Media. Proc. R. Soc. London A, Vol. 430, pp. 105-131.
67. Green, A.E. and P.M. Naghdi. (1965), A Dynamical Theory of Interacting Continua. Int. J. of Engineering Science, Vol. 3, pp. 231-241.
68. Green, A.E. (1956), Hypoelasticity and Plasticity. Proc. Roy. Soc., Vol. 234, pp. 46-59.
69. Griffiths, D.V. and G.A. Fenton. (1993), Seepage Beneath Water Retaining Structures Founded on Spatially Random Soil. Geotechnique, 43(4):577-587.
70. Griffiths, D.V. and J.H. Prevost. (1990), Stress-strain curve generation from simple triaxial parameters. Num. Analyt. Meth. Geomech. , 14:587-594.
71. Gudehus, G. and D. Kolymbas. (1979), A Constitutive Law of Rate Type for Soils. Proceedings, 3rd Int. Conf. Num. Meth. Geom., W. Wittke, ed., Balkema, Rotterdam.
72. Gulf Canada Resources Inc. (1984), Frontier development - Molikpaq, Tarsiut delineation - 1984/85 season. Technical Report 84F012, Gulf Canada Resources Inc.
73. Hadamard, J. (1903), Leçons Sur la Propagation des Ondes et les Equations de L'hydrodynamique. Hermann, Paris.
74. Harder, H. and G. von Bloh. (1988), Determination of representative CPT-parameters. In Proc. Geotechn. Conf. Penetration Testing in the UK, pages 237-240, Birmingham, Inst. of Civil Engineers.
75. Hayashi, H., M. Honda, and T. Yamada. (1992), Modeling of nonlinear stress strain relations of sands for dynamic response analysis. In Proc. 10th World Conf. on Earthquake Engnrg., volume 11, pages 6819-6825, Madrid, Spain, Balkema, Rotterdam.
76. Hicker, P.Y. (1985), Comportement Mecanique des argiles saturees sur divers chemins de sollicitations monotones et cycliques. Application a une modelisation elastoplastique et viscoplastique. These de Doctorat d'Etat, Universite Paris 6, Paris, France.
77. Hill, R. (1950), The Mathematical Theory of Plasticity, Clarendon Press, Oxford, England.
78. Hill, R. (1962), Acceleration Waves in Solids. J. Mech. Phys. Solids., Vol. 10, pp. 1-16.
79. Hirai, H. (1987), An Elastoplastic Constitutive Model for Cyclic Behavior of Sands. Int. J. Numer. Anal. Methods Geomech., Vol. 11, pp. 503-520.
80. Hogue, C. and D. Newland. (1994), Efficient Computer Simulation of Moving Granular Particles. Powder Techn., Vol. 78, pp. 51-66.
81. Holtz, W.G. and H.J. Gibbs. (1979), Discussion of "SPT and relative density in coarse sand". J. Geotech. Eng. Div., ASCE, 105(GT3):439-441.
82. Huntsman, R.S., Mitchell J.K., and Klejbuk L.W. (1986), Lateral stress measurement during cone penetration. In S.P. Clemence, editor, Use of In-Situ Tests in Geotechnical Engineering, pages 617-634. ASCE, New York.
83. Iai, S. (1993), Micromechanical background to a strain space multiple mechanism model for sand. Soils and Foundations, 33(1):102-117.
84. Iai, S., T. Kameoka, and Y. Matsunaga. (1993), Numerical Class "A" prediction of model no 1. In Proc. Int. Conf. on Verif. Numerical Proc. for the Analysis of Soil Liq. Problems, volume 1, pages 109-127. Balkema, Rotterdam.
85. Ishihara, K., F. Tatsuoka and S. Yasuda. (1975), Undrained Deformation and Liquefaction of Sand Under Cyclic Stresses. Soils and Found., Vol. 15, pp. 29-44.
86. Ishihara, K. (1993), Liquefaction and flow failure during earthquakes. Géotechnique, 43(3):351-415.
87. Iwan, W.D. (1967), On a Class of Models for the Yielding Behavior of Continuous and Composite Systems. J. Appl. Mech., ASME, Vol. 34, pp. 612-617.
88. Jamiolkowski, M., C.C. Ladd, J.T. Germaine, and R. Lancellotta. (1985), New developments in field and laboratory testing of soils. In Proc. 11th Int. Conf. on Soil Mech. and Foundation Engnrg., volume 1, pages 57-153, San Francisco.
89. Jefferies, M.G. and K. Been. (1987), Use of critical state representations of sand in the method of stress characteristics. Can. Geotech. Journ., 24:441-446.
90. Jefferies, M.G. and M.P. Davies. (1991), Soil classification by the cone penetration test: Discussion. Can. Geotech. Journ., 28:173-176.
91. 60. Geotechnical Testing Journal, 16(4):458-468.
92. Jefferies, M.G., B.T. Rogers, H.R. Stewart, S. Shinde, D. James, and S. Williams-Fitzpatrick. (1988), Island construction in the Canadian Beaufort Sea. In Proc. ASCE Spec. Conf. Hydr. Fills, pages 816-883, Fort Collins, American Society of Civil Engineers.
93. Jones, G. and E. Rust. (1982), Piezometer penetration testing. In Proc. 2nd European Symp. on Penetration Testing, volume 2, pages 607-613, Amsterdam.
94. Kabilamany, K. and K. Ishihara. (1991), Cyclic Behavior of Sand by Multiple Shear Mechanism Model. Int. J. Soil Dynamics and Earthquake Engrg., Vol. 10, No. 2, pp. 74-83.
95. Kabilamany, K. and K. Ishihara. (1990), Stress Dilatancy and Hardening Laws for Rigid Granular Model of Sand. Int. J. Soil Dynamics and Earthquake Engrg., Vol. 9, No. 2, pp. 66-77.
96. Katona, M.G. (1984), Evaluation of Viscoplastic Cap Model. J. Geotech. Eng. Div., ASCE, Vol. 110, No. GT8, pp. 1106- -1125.
97. Keller, J.B. (1986), Impact with Friction. J. Appl. Mech., ASME, Vol. 53, pp. 1-4.
98. Koerner, R.M. (1970), Effect of particle characteristics on soil strength. J. Soil Mech. Found. Div., ASCE, 96(SM4):1221-1234.
99. Koiter, W.T. (1960), General Theorems for Elastic-Plastic Solids. Progress in Solid Mechanics, North Holland, Amsterdam, pp. 165-221.
100. Kondner, R.L. (1963), Hyperbolic stress-strain response: Cohesive soils. Journ. Soil Mech. and Found. Div., ASCE, 89(SM1):115-143.
101. Krieg, R.D. and D.B. Krieg. (1977), Accuracies of Numerical Solution Methods for the Elastic-Perfectly Plastic Model. J. Pressure Vessel Technol., ASME, Vol. 99, pp. 510-515.
102. Krieg, R.D. and S.M. Key. (1976), Implementation of a Time Dependent Plasticity Theory into Structural Computer Programs. Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, ASME, Vol. 20, pp. 125-137.
103. Krieg, R.D. (1975), A Practical Two Surface Plasticity Theory. J. Appl. Mech., ASME, Vol. 42, pp. 641-646.
104. Kulhawy, F.H. and P.W. Mayne. (1990), Manual on estimating soil properties for foundation design. Final Report 1493-6, EL-6800, Electric Power Research Institute, Palo Alto, CA.
105. Lade, P.V. (1977), Elastoplastic Stress-Strain Theory for Cohesionless Soils with Curved Yield Surface. Int. J. Solids Struct., ASCE, Vol. 13, pp. 1019-1035.
106. Lade, P.V. and J.M. Duncan. (1975), Elastoplastic Stress-Strain Theory for Cohesionless Soil. J. Geotech. Eng. Div., ASCE, Vol. 101, pp. 1037-1053.
107. Loret, B., J.H. Prevost and A. Deb. (1995), Finite Element Simulation of Strain-Localization: A Multi-Scale Problem. Comp. Meth. Appl. Mech. Eng., Vol. 120, pp. 315-338.
108. Loret, B. and J.H. Prevost. (1991), Dynamic Strain-Localization in Water-Saturated Porous Media. Engrg. Mech., Vol. 117, No. 4, pp. 907-922.
109. Loret, B. and J.H. Prevost. (1990a), Dynamic Strain-Localization in Elasto-(Visco-) Plastic Solids: Part 1-GeneralFormulation and One-Dimensional Examples. Comp. Meth. Appl. Mech. Eng., Vol. 83, pp. 247-273.
110. Loret, B. and J.H. Prevost. (1990b), Dynamic Strain-Localization in Elasto-(Visco-) Plastic Solids: Part 2-Plane Strain Examples. Comp. Meth. Appl. Mech. Eng., Vol. 83, pp. 275-294.
111. Loret, B. and J.H. Prevost. (1986), Accurate Numerical Solutions for Drucker-Prager Elastic Plastic Models. Comp. Meth. Appl. Mech. Eng., Vol. 54, No. 3, pp. 258-277.
112. Luong, M.P. and A. Touati. (1983), Sols Grenus sous Fortes Constraintes. Revue Francaise de Geotechnique, Vol. 23, pp. 51-63.
113. Luong, M.P. (1980), Phenomenes Cycliques dans les Sols Pulverulents. Revue Francaise de Geotechnique, Vol. 10, pp. 39-53.
114. Mandel, J. (1963), Propagation des Surfaces de Discontinuite dans un Milieu Elasto-Plastique. Proceedings IUTAM Symposium on Stress Waves in Inelastic Solids, Brown University, (Springer, Berlin), pp. 337-344.
115. Mandel, J. (1965), Une Generalisation de la Theorie de Koiter. Int. J. Solids and Structs., Vol. 1, pp. 273-295.
116. Marcuson, W.F. and W.A. Bieganousky. (1977), SPT and relative density in coarse sands. Journ. Geotechnical Engnrg. Div., 103(GT11):1295-1309.
117. Matsuoka, J. and K. Sakakibara. (1987), A Constitutive Model for Sands and Clay Evaluating Principal Stress Rotation. Soils and Found., Vol. 27, pp. 73-88.
118. Matsuoka. (1974),
119. Mehrabadi, M.M., B. Loret and S. Nemat-Nasser. (1993), Incremental Constitutive Relations for Granular Materials Based on Micromechanics. Proc. R. Soc., London, Vol. A441, pp. 433-463.
120. Meyerhof, G.G. (1957), Discussion of session 1. In Proc. 4th Int. Conf. on Soil Mechanics and Foundation Engnrg., volume 3, London.
121. Mitchell, J.K. and D.J. Tseng. (1990), Assessment of liquefaction potential by cone penetration resistance. In J.M. Duncan, editor, Proc. H. Bolton Seed Memorial Symp., volume 2, pages 335-350.
122. Mroz, Z. and S. Pietruszczak. (1983a), An Constitutive Model for Sand with Anisotropic Hardening Rule.' Int. J. Numer. Anal. Methods Geomech., Vol. 7, pp. 305-320.
123. Mroz, Z. and S. Pietruszczak. (1983b), On Hardening Anisotropy of Ko- Consolidated Clays. Int. J. Num. Meth. Geom., Vol. 7, pp. 19-38.
124. Mroz, Z., V.A. Norris and O.C. Zienkiewicz. (1981), An Anisotropic, Critical State Model for Soils Subjected to Cyclic Loading. Geotechnique, Vol. 31, pp. 451-469.
125. Mroz, Z. (1980), Hypoelasticity and Plasticity Approaches to Constitutive Modelling of Inelastic Behavior of Soils. Int. J. Num. Analyt. Meth. Geom., Vol. 4, pp. 45-66.
126. Mroz, Z. (1967), On the Description of Antisotropic Workhardening. J. Mech. Phys. Solids, Vol. 15, pp. 163-175.
127. Muhlhaus, H.B. and I. Vardoulakis. (1987), The Thickness of Shear Bands in Granular Materials. Geotechnique, Vol. 37, pp. 271-283.
128. Mulilis, J.P., H.B. Seed, C.K. Chan, J.K. Mitchell, and K. Arulanandan. (1977), Effects of sample preparation on sand liquefaction. J. Geotech. Eng. Div., ASCE, 103(GT2):91-108.
129. Naval Fac. Eng. Command, Alexandria. (1982), Soil Mechanics (DM 7.1).
130. Nayak, G.C. and O.C. Zienkiewicz. (1972), Elastic-Plastic Stress Analysis: A Generalization for Various Consitutive Relations Including Strain Softening. Int. J. Num. Meth. Engrg., Vol. 5, No. 1, pp. 113-125.
131. Needleman, A. (1988), Material Rate Dependence and Mesh Sensitivity in Localization Problems. Comput. Methods Appl. Mech. Engrg., Vol. 67, pp. 69-85.
132. Nemat-Nasser, S. and M.M. Mehrabadi. (1984), Micro-mechanically Based Rate Constitutive Descriptions for Granular Materials. Mechanics of Engineering Materials, John Wiley & Sons, pp. 451-463.
133. Nguyen, Q.S. (1977), On the Elastic-Plastic Initial Boundary Value Problem and its Numerical Integration. Int. J. Num. Meth. Engrg., Vol. 11, pp. 817-832.
134. Oda, M. (1972), Initial fabrics and their relations to mechanical properties of granular materials, Jap. Soc. Soil Mech. Found. Engnrg.: Soils Founds., 12:17-36.
135. Oda, M. and Konishi, J. (1974), Microscopic deformation mechanism of granular material in simple shear. Jap. Soc. Soil Mech. Found. Engnrg.: Soils Founds., 14:25-38.
136. Oda, M., J Konishi and S. Nemat-Nasser. (1980), Some Experimentally Based Fundamental Results on the Mechanical Behavior of Granular Materials. Geotechnique, Vol. 3, No. 4, pp. 479-495.
137. Oda, M. and S. Nemat-Nasser. (1982), Experimental Micro-mechanical Evaluation of Strength of Granular Materials. Mech. Mat., Vol. 1, pp. 269-283.
138. Ohsaki, Y. and R. Iwasaki. (1973), On dynamic shear moduli and Poisson's ratio of soil deposits. Soils and Foundations, 13(4):61-73.
139. Ohta, Y. and N. Goto. (1978), Empirical shear wave velocity equations in terms of characteristic soil indexes. Earthq. Engnrg. Struct. Dyn., 6:167-187.
140. Ohtomo, K. and M. Shinozuka. (1990), Two-dimensional spatial severity of liquefaction. Proc. 8th Japan Earthquake Engnrg. Symp., Tokyo.
141. Olsen, R.S. and J.V. Farr. (1986), Site characterization using the cone penetrometer test. In S.P. Clemence, editor, Use of In-Situ Tests in Geotechnical Engineering, pages 854-868. ASCE, New York.
142. Ortiz, M. and J.C. Simo. (1986), An Analysis of a New Class of Integration Algorithms for Elastoplastic Constitutive Relations. Int. J. Num. Meth. Engrg., Vol. 23, No. 3, pp. 353- 366.
143. Ortiz, M. and E.P. Popov. (1985), Accuracy and Stability of Integration Algorithms for Elastoplastic Constitutive Relations. Int. J. Num. Meth. Engrg., Vol. 21, No. 9, pp. 1561- 1576.
144. Paice, G.M., D.V. Griffiths and G.A. Fenton. (1996), Finite Element Modeling of Settlements on Spatially Random Soil. Journ. Geotechnical Engnrg., 122(9):777-779.
145. Pande, G.N. and K.C. Sharma. (1983), Multilaminate Model of Clays - A Numerical Evaluation of the Influence of Rotation of the Principal Stress Axes. Int. J. Numer. Anal. Methods Geomech., Vol. 7, pp. 397-418.
146. Parry, R.H.G. (1977), Estimating bearing capacity in sand from SPT values. J. Geotech. Eng. Div., ASCE, 103(GT9):1014-1019.
147. Pastor, M., O.C. Zienkiewicz, and K.H. Leung. (1985), Simple model for transient soil loading in earthquake analysis. II. Non-associative models for sands, Int. J. Numer. Anal. Methods Geomech., 9:477-498.
148. Pastor, M., O.C. Zienkiewicz, and A.C. Chan. (1990), Generalized Plasticity and the Modelling of Soil Behavior. Int. J. Numer. Anal. Methods Geomech., Vol. 14, pp. 151-190.
149. Pender, M.J. (1978), A Model for the Behavior of Overconsolidated Soil. Geotechnique, Vol. 28, pp. 1-25.
150. Perzyna, P. (1971), Thermodynamic Theory of Viscoplasticity. Q. Appl. Math., Vol. 11, pp. 243-377.
151. Perzyna, P. (1966), Fundamental Problems in Viscoplasticity. Q. Appl. Math., Vol. 9, pp. 243-377.
152. Perzyna, P. (1963), The Constitutive Equations for Rate-Sensitive Plastic Materials. Q. Appl. Math., Vol. 20, pp. 321-332.
153. Phoon, K.K. and F.H. Kulhawy. (1996), On quantifying inherent soil variability. In Proc. ASCE GED Spec. Conf. on Uncertainty in the Geologic Environ.: From Theory to Practice, volume 1, pages 326-340, Madison, Wisconsin.
154. Popescu, R. (1995), Stochastic Variability of Soil Properties: Data Analysis, Digital Simulation, Effects on System Behavior . PhD thesis, Princeton University, Princeton, NJ.
155. Popescu, R. and J.H. Prevost. (1993a), Centrifuge validation of a numerical model for dynamic soil liquefaction. Soil Dynamics and Earthquake Eng., 12(2):73-90.
156. Popescu, R. and J.H. Prevost. (1993b), Numerical Class "A" predictions for Models No. 1, 2, 3, 4a, 4b, 6, 7, 11 and 12. In Proc. Int. Conf. on Verif. Numerical Proc. for the Analysis of Soil Liq. Problems, volume 1, pages 1105-1207. Balkema, Rotterdam.
157. Popescu, R. and J.H. Prevost. (1995a), Comparison between VELACS numerical "class A" predictions and centrifuge experimental soil test results. Soil Dynamics and Earthquake Eng., 14(2 ):79-92.
158. Popescu, R. and J.H. Prevost. (1995b), Reliability assessment of centrifuge soil test results. Soil Dynamics and Earthquake Eng., 14(2):93-101.
159. Popescu, R., J.H. Prevost, and G. Deodatis. (1996a), Influence of spatial variability of soil properties on seismically induced soil liquefaction. In Proc. ASCE GED Spec. Conf. on Uncertainty in the Geologic Environ.: From Theory to Practice, volume 2, pages 1098-1112, Madison, Wisconsin.
160. Popescu, R., Deodatis, G., and Prevost, J.H., (1996b), Simulation of non-Gaussian stochastic vector fields. Probabilistic Engnrg. Mechanics. (accepted for publication).
161. Popescu, R., J.H. Prevost, and G. Deodatis. (1997a), Effects of spatial variability on soil liquefaction: Some design recommendations. Géotechnique, (submitted).
162. Popescu, R., J.H. Prevost, and G. Deodatis. (1997b), Stochastic variability of soil properties: Field data analysis. Journ. of Geotechnical Engnrg., ASCE, (submitted).
163. Poulos, S.J., G. Castro, and W. France. (1985), Liquefaction evaluation procedure. Journ. Geotechnical Engnrg., 111(6):772-792.
164. Prager, W. (1959), Introduction to Plasticity, Addison-Wesley, Reading, Mass.
165. Prevost, J.H. and B. Loret. (1995), Finite Element Simulations of Strain-Localization: a Multi-Scale Problem. Comput. Methods Appl. Mech. Engrg., Vol. 120, pp. 315-338.
166. Prevost, J.H. (1995), DYNAFLOW: A nonlinear transient finite element analysis program. Technical report, Dept. of Civil Eng. and Op. Research, Princeton University, Princeton, NJ.
167. Prevost, J.H. and C.M. Keane. (1990), Multi-Mechanism Elasto-Plastic Model for Soils. J. Eng. Mech., ASCE, Vol. 116, No. EM9, pp. 1924-1944.
168. Prevost, J.H. and C.M. Keane. (1989), Shear stress-strain curve generation from simple material parameters. Journ. Geotechnical Engnrg., 116(8):1255-1263.
169. Prevost, J.H. (1985), A simple plasticity theory for frictional cohesionless soils. Soil Dynamics and Earthquake Eng., 4:9-17.
170. Prevost, J.H. (1982), Two-surface vs. multi-surface plasticity theories. Int. J. Num. Anal. Meth. Geomech., (6):323-338.
171. Prevost, J.H. (1980), Mechanics of Continuous Porous Media. Int. J. of Engineering Science, Vol. 18, No. 5, pp. 787-800.
172. Prevost, J.H. (1978), Anisotropic Undrained Stress-Strain Behavior of Clays. J. Geotech. Eng. Div., ASCE, Vol. 104, No. GT8, Proc. Paper 13942, pp. 1075-1090.
173. Prevost, J.H. (1977), Mathematical modeling of monotonic and cyclic undrained clay behavior. Int. J. Num. Meth. Geom., 1(2):195-216.
174. Rice, J.R. (1976), The Localization of Plastic Deformation. Theoretical and Applied Mechanics, Proceedings of the 14th IUTAM Congress, Delft (North-Holland, Amsterdam), pp. 207-220.
175. Robertson, P.K. (1990), Soil classification by the cone penetration test. Can. Geotech. Journ., 27:151-158.
176. Robertson, P.K. and R.G. Campanella. (1983), Interpretation of cone penetration tests - Part I: sand. Can. Geotech. Journ., 20:718-733.
177. Robertson, P.K. and R.G. Campanella. (1985), Liquefaction potential of sands using the CPT. Journ. Geotechnical Engnrg., 111(3):384-403.
178. Robertson, P.K., R.G. Campanella, and A. Wightman. (1982), SPT-CPT correlations. Technical report, Soil Mech. Series No. 62, Dept. of Civil Engnrg., Univ. of British Columbia.
179. Roscoe, K.H. and J.B. Burland. (1968), On the Generalized Stress-Strain Behavior of Wet Clay. Engineering Plasticity, pp. 535-609.
180. Roscoe, K.H., A.N. Schofield and D.P. Wroth. (1958), On the Yielding of Soils. Geotechnique, Vol. 9, pp. 22-53.
181. Rowe, P.W. (1962), The Stress-Dilatancy Relation for Static Equilibrium of an Assembly of Particles in Contact. Proc. Roy. Soc., Vol. A269, pp. 500-527.
182. Sandler, I.S. and D. Rubin. (1979) "An Algorithm and a Modular Subroutine for the Cap Model. Int. J. Numer. Anal. Methods Geomech., Vol. 3, pp. 173-186.
183. Sandler, I.S., F.L. Dimaggio, and G.Y. Baladi. (1976), Generalized Cap Model for Geological Materials. J. Geotechn. Eng. Div., ASCE, Vol. 102, No. GT7, pp. 683-697.
184. Schmertmann, J.H. (1975), Measurement of in-situ shear strength. In Proc. ASCE Spec. Conf. on In-Situ Meas. Soil Prop., volume 2, pages 57-138, Raleigh.
185. Schmertmann, J.H. (1978), Guidelines for cone penetration test performance and design; Rep. FHWA-TS-78-209. Technical report, U.S. Dept. Trans., Washington, DC.
186. Schofield, A. and C.P. Wroth. (1968), Critical State Soil Mechanics. McGraw-Hill, London.
187. Schreyer, H.L., R.F. Kulak and J.M. Kramer. (1979), Accurate Numerical Solutions for Elastic-Plastic Models. J. Pressure Vessel Technol., ASME, Vol. 101, pp. 226-234.
188. Scott, R.F. (1985), Plasticity and constitutive relations in soil mechanics. Journ. Geotechnical Engnrg., 111(5):563-605.
189. Scott, R.F. and M.J.K. Craig. (1980), Computer Modeling of Clay Structure and Mechanics. J. Geotech. Eng. Div., ASCE, Vol. 106, No. GT1, pp. 17-33.
190. Seed, H.B. (1987), Design problems in soil liquefaction. Journ. Geotechnical Engnrg. Div., 113(8):827-845.
191. Seed, H.B. and P. De Alba. (1986), Use of SPT and CPT tests for evaluating the liquefaction resistance of sands. In S.P. Clemence, editor, Use of In-Situ Tests in Geotechnical Engineering, pages 281-302. ASCE, New York.
192. Seed, H.B., I.M. Idriss, and I. Arango. (1983), Evaluation of liquefaction potential using field performance data. J. Geotech. Eng., ASCE, 109(3):458-482.
193. Seed, H.B., R.B. Seed, L.F. Harder, and H.L. Jong. (1988), Reevaluation of the slide in the Lower San Fernando dam during the earthquake of February 9, 1971. Technical Report UCB/EERC-88/04, Univ. Calif. Berkeley.
194. Seed, H.B., K. Tokimatsu, L.F. Harder, and R.M. Chung. (1985), The influence of SPT procedures in soil liquefaction resistance evaluations. Journ. Geotechnical Engnrg., 121(12):1425-1445.
195. Seed, R.B. and L.F. Harder. (1990), SPT-based analysis of cyclic pore pressure generation and undrained residual strength. In J.M. Duncan, editor, Proc. H. Bolton Seed Memorial Symp., volume 2, pages 351-376.
196. Senneset, K. and N. Janbu. (1985), Shear strength parameters obtained from static CPT. In R.C. Chaney and K.R. Demars, editors, Strength Testing of Marine Sediments. ASTM, Philadelphia.
197. Shibata, T. and W. Teparaksa. (1988), Evaluation of liquefaction potential of soils using cone penetration tests. Soils and Foundations, 28(2):49-60.
198. Simo, J.C. and T.J.R. Hughes. (1987), General Return Mapping Algorithms for Rate-Independent Plasticity. Constitutive Laws for Engineering Materials: Theory and Applications, Elsevier, Vol. 1, pp. 221-232.
199. Simo, J.C., et al. (1987), Unconditionally Convergent Algorithms for Non-smooth Multisurface Plasticity Amenable to Exact Linearization. Advances in Inelastic Analysis, ASME, pp. 87-95.
200. Simo, J.C. and R.L. Taylor. (1986), A Consistent Return Mapping Algorithm for Plane Strain Elastoplasticity. Int. J. Num. Meth. Engrg., Vol. 22, pp. 649-670.
201. Simo, J.C. and M. Ortiz. (1985), A Unified Approach to Finite Deformation Elastoplastic Analysis Based on the Use of Hyperelastic Constitutive Equations. Comp. Meth. Appl. Mech. Engrg., Vol. 49, pp. 221-245.
202. Skempton, A.W. (1986), Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, aging and overconsolidation. Geotechnique, 36(3):425-447.
203. Sluys, L.J. and R. de Borst. (1992), The Use of Higher- Order Continuum Models for the Computational Modeling of Shear- Banding. Mech. Mat.. Special Issue on Strain-Localization and Instabilities in Geomaterials. Presented at Society of Engineering Science's 29th Annual Meeting, San Diego, Sept. 14-16.
204. Stark, T.D. and G. Mesri. (1992), Undrained shear strength of liquefied sands for stability analysis. Journ. Geotechnical Engnrg., 118(11):1727-1747.
205. Stark, T.D. and S.M. Olson. (1995), Liquefaction resistance using CPT and field case histories. Journ. Geotechnical Engnrg., 121(12):856-869.
206. Stewart, W.P. and R.G. Campanella. (1993), Practical aspects of in-situ measurements of material damping with the SCPT. Canadian Geotechnical Journal, 30(2):211-219.
207. Subhash, G., S. Nemat-Nasser, M.M. Mehrabadi and H.M. Shodja. (1991), Experimental Investigation of Fabric-Stress Relations in Granular Materials. Mech. Mat., Vol. 11, pp. 87- 106.
208. Tatsuoka, F. and S. Shibuya. (1992), Deformation characteristics of soils and rocks from field and laboratory tests. In Proc. 9th Asian Reg. Conf. on Soil Mech. and Found. Engnrg., volume 2, Bankok, keynote lecture.
209. Tatsuoka, F., M.S.A Siddiquee, C. Park, M. Sakamoto, and F. Abe. (1993), Modelling stress-strain relations of sand. Soils and Foundations, 33(2):60-81.
210. Terzaghi, K. (1943), Theoretical Soil Mechanics, John Wiley and Sons, N.Y.
211. Thornton, C. and G. Sun. (1994), Numerical Simulation of General 3D Quasi-static Shear Deformation. Numerical Methods in Geotechnical Engineering, Balkema Pub., Rotterdam, pp. 143-148.
212. Thornton, C. and G. Sun. (1993), Axisymmetric Compression of 3D Polydisperse Systems of Spheres. Powders & Grains 93, Balkema Pub., Rotterdam, pp. 129-134.
213. Thomas, T.Y. Plastic Flow and Fracture in Solids. Academic Press, New York.
214. Ting, J.M., M. Khwaja, L.R. Meachum and J.D. Rowell. (1993), An Ellipse-based Discrete Element Model for Granular Materials. Int. J. Numer. Anal. Methods Geomech., Vol. 17, pp. 603-623.
215. Tokimatsu, K. and Y. Yoshimi. (1983), Empirical correlation of soil liquefaction based on SPT N-value and fines content. Soils and Foundations, 23(4):56-74.
216. Triantafyllidis, N. and E.C. Aifantis. (1986), A Gradient Approach to Localization of Deformation: I Hyperelastic Materials. J. Elasticity, Vol. 16, pp. 225-237.
217. Valanis, K.C. and H.J.E. Read. (1982), A New Endochronic Plasticity Model for Soils. Soil Mechanics-Transient and Cyclic Loads, G.N. Pande and O.C. Zienkiewicz, eds., Wiley, pp. 375-417.
218. Vardoulakis, I. (1988), Theoretical and experimental bounds for shear-band bifurcation strain in biaxial tests on dry sand. Res. Mechanica, 23:239-259.
219. Vardoulakis, I. (1980), Shear Band Inclination and Shear Modulus of Sand in Biaxial Tests. Int. J. Numer. Anal. Methods Geomech., Vol. 4, pp. 103-119.
220. Vermeer, P.A. (1980), Formulation and Analysis of Sand Deformation Problems. Ph.D. Thesis, Department of Civil Engineering, Delft University, The Netherlands.
221. Walton, K. (1988), Wave Propagation within Random Packing of Spheres. Geophysical J., Vol. 92, pp. 89- 97.
222. Whitaker, S. (1969), Advances in Theory of Fluid Motion in Porous Media. Industrial and Engineering Chemistry, Vol. 61, No. 2, pp. 14-28.
223. Wilkins, J.L. (1964), Calculation of Elastic-plastic Flow. Methods of Computational Physics, Academic Press, New York, Vol. 8.
224. Wren, J.R. and R.I. Borja. (1995), Macromechanical Basis of Continuum Models for Granular Materials. II: Validation. J. Geotech. Eng. Div., ASCE, in review.
225. Wren, J.R. and R.I. Borja. (1994), Macro- and Micro- mechanical Responses of Granular Materials Under Imposed Overall Stresses: Numerical Algorithms and Bifurcation Analyses. Comput. Methods Appl. Mech. Engrg., in review.
226. Yoder, P.J. and B.G. Whirley. (1984), On the Numerical Implementation of Elastoplastic Models. J. Appl. Mech., ASME, Vol. 51, pp. 283-228.
227. Yoshimi, Y., K. Tokimatsu, and Y. Hosaka. (1989), Evaluation of liquefaction resistance of clean sands based on high-quality undisturbed samples. Soils and Foundations, 29(1):3-104.
228. Zhuang, X., A.K. Didwania and J.D. Goddard. (1995), Simulation of the Quasi-Static Mechanics and Scalar Transport Properties of Ideal Granular Assemblages. J. Comp. Physics, Vol. 121, pp. 331-346.
229. Zienkiewicz, O.C., K.H. Leung and M. Pastor. (1985), Simple Model for Transient Soil Loading in Earthquake Analysis. I. Basic Model and Its Application. Int. J. Numer. Anal. Methods Geomech., Vol. 9, pp. 453-476.
230. Zienkiewicz, O.C. and Z. Mroz. (1984), Generalized Plasticity Formulation and Application to Geomechanics. Mech. Eng. Materials, John Wiley & Sons, pp. 655-679.