On the mechanics of crack initiation and propagation in elasto-plastic materials in impact fretting wear

Journal of Tribology

Volumn 126, Issue 2, 2004, Pages 395-403

  Gessesse, Y B ^a   Attia, M H ^b   Osman, M O M ^c  

^a CUMMINS INC   (United States)

^b NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^c Dept of Electrical and Computer Engineering   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; FRICTION; HARDENING; NUCLEATION; PRESSURE EFFECTS; RESIDUAL STRESSES; WEAR OF MATERIALS;

CONTACT PRESSURE; CRACK LENGTH; CRACK TIP SLIP DISPLACEMENT (CTSD); SHEAR TRACTION;

TRIBOLOGY;

CRACK PROPAGATION; CRACK TIP; ELASTOPLASTICITY; FRETTING WEAR;

EID: 2542487426     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1491975     Document Type: Article

References (54)

1. Suh, N. P., 1973, "The Delimitation Theory of Wear," Wear, 25, pp. 111-124.
2. Suh, N. P., 1977, "An Overview of the Delamitation Theory of Wear," Wear, 44, pp. 1-16.
3. Jahanmir, S., and Suh, N. R. 1977, "Mechanics of Subsurface Void Nucleation in Delamination Wear," Wear, 44, pp. 17-38.
4. Engel, P. A., 1986, Impact Wear of Materials, Elsevier, New York.
5. Waterhouse, R. B., 1981, "Fretting Wear," Proceedings, International Conference on Wear of Materials, S. K. Rhee et al., eds., ASME, New York, pp. 17-22.
6. Gauland, D. J., and Duquette, D. J., 1980, "Cyclic Wear Behavior (Fretting) of a Tempered Martensite Steel," Metall. Trans. A, pp. 1581-1388.
7. Rice, S. L., 1979, "The Role of Microstructure in Impact Wear of Two Aluminum Alloys." Proceedings, International Conference on Wear of Materials, K. C. Ludema et al., eds., ASME, New York, pp. 27-34.
8. Rice, S. L., 1979, "Variation in Wear Resistance Due to Microstructural Condition in High Strength Steel Under Repetitive Impact," Tribol. Int., pp. 25-29.
9. Iturbe, E. B., Greenfield, I. G., and Chou, T. W., 1981, "Wear Mechanism in Copper By Repetitive Impacts," Proceedings, International Conference on Wear of Materials, S. K. Rhee et al., eds., ASME, New York, pp. 685-688.
10. Hofmann, P. J., Schettler, T., and Steininger, D. A., 1992, "PWR Steam Generator Tube Fretting and Fatigue Wear Phenomena and Correlations," International Symposium on Flow Induced Vibration and Noise, M. P. Paidoussis et al., ed., ASME, New York, pp. 211-236.
11. Gessesse, Y., 1997, "On the Fretting Wear of Nucleus Power Plant Heat Exchanger Tubes Using a Fracture Mechanics Approach: Theory and Verification," Ph.D. thesis, Concordia University, Montreal, Quebec, Canada.
12. Attia, M. H., and Magel, E., 1999, "Experimental Investigation of Long-Term Fretting Wear of a Multi-Span Steam Generator Tubes With U-Bend Sections," Wear, 225-229, pp. 653-574.
13. Attia, M. H., Magel, E. E., Nadeau, E., Anderson, H., and Suave, R. G., 1993, "Prediction of Long-Term Fretting Wear Behavior of Steam Generator Tubes," Proceedings. International Nuclear Congress, Toronto, Ontario, Canada, 2, pp. 436-450.
14. Hofmann, P. J., and Schettler, T., 1989, "PWR Steam Generator Tube Fretting and Fatigue Wear," Electric Power Research Institute EPRI, California, Report No. EPRI-NP-6341.
15. Maw, N., Barber, J. R., and Fawcett, J. N., 1976, "The Oblique Impact of Elastic Spheres," Wear, 38, pp. 101-114.
16. Brenner, S. S., Wriedt, H. A., and Oriani, R. A., 1981, "Impact Adhesion of Iron at Elevated Temperatures," Wear, 68, pp. 169-190.
17. Ratner, S. B., and Styller, E. E., 1981, "Characterization of Impact Friction and Wear of Polymeric Materials," Wear, 73, pp. 213-234.
18. Kragelsky, I. V., Dobychin, M. N., and Kornbalov, V. S., 1982, Friction and Wear Calculation Methods, Pergamon Press, New York.
19. 2-Based Environment," Wear 106, pp. 97-138.
20. Follancebee, P. S., Sinclair, G. B., and Williams, J. C., 1981-82, "Modelling of Low Velocity Particulate Erosion in Ductile Materials By Sphere Particles," Wear, 74, pp. 107-122.
21. Johnson, K. L., 1987, Contact Mechanics, Cambridge University Press, New York.
22. Tsukada, T., and Anno, Y., 1972, "An Analysis of the Deformation of Contacting Rough Surfaces-3rd Report Introduction of a New Contact Theory of Rough Surfaces," Bull. JSME, 15, pp. 996-1003.
23. Johnson, K. L., 1982, "One Hundred Years of Hertz Contact," Proc. Inst. Mech. Eng., 196, pp. 363-378.
24. Hamilton, G. M., and Goodman, L. E., 1966, "The Stress Field Created by Circular Sliding Contact," ASME J. Appl. Mech., pp. 371-376.
25. Merwin, J. E., and Johnson, K. L., 1963, "An Analysis of Plastic Deformation in Rolling Contact," Proc. Inst. Mech. Eng., 177, pp. 676-690.
26. Hills, D., and Ashelby, D. W., 1982, "The Influence of Residual Stresses on Contact-Load Bearing Capacity," Wear, 75, pp. 221-240.
27. Gurland, J., and Plateau, J., 1963, "The Mechanism of Ductile Rupture of Metals Containing Inclusions," ASM Trans., 56, pp. 54-65.
28. Tanaka, K., Mori, T., and Nakamura, T., 1970, "Cavity Formation at the Interface of a Spherical Inclusion in a Plastically Deformed Matrix," Philos. Mag. A, 21, pp. 267-279.
29. Ashby, M. F., 1966, "Work Hardening of Dispersion Hardened Crystals," Philos. Mag. A, 14, pp. 1157-1178.
30. McClintock, F. A., 1968, "On the Mechanics of Fracture from Inclusions," Ductility, ASM, Metals Parks, pp. 255-277.
31. Argon, A. S., Im, J., and Safoglu, R., 1975, "Cavity Formation from Inclusion in Ductile Fracture," Metall. Trans. A, pp. 825-837.
32. Argon, A. S., and Im, J., 1975, "Separation of Second Phase particles in Spheroidized 1045 Steel, Cu-0.6 percent Cr Alloy, and Maraging Steel in Plastic Straining," Metall. Trans. A, pp, 839-851.
33. ANSYS User's Manual, 1994, Volume I-IV, Revision 5.0, Swanson Analysis System, Inc. Houston, PA.
34. Metals Handbook, 1990, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 2 10th ed, ASM International.
35. ASTM Manual on Zirconium and Hafnium. 1977, J. H. Schemel, ed., ASTM Special Technical Publication 639.
36. Salehzadeh, H., and Saka, N., 1992, "The Mechanics of Crack Initiation at hard Particles in Rolling Line Contacts," ASME J. Tribol., 114, pp. 341-347.
37. Jahanmir, S., 1977, "A Fundamental Study on the Delamination Theory of Wear," Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
38. Saka, N., Pamies-Teixeira, J. J., and Suh, N. P., 1973, "Wear of Two-Phase Metals," Wear, 44, pp. 77-86.
39. Shaw, M. C., 1984, Metal Cutting Principles, Oxford Science Publications, Oxford, U.K.
40. Erdogan, F., and Shih, G. C., 1963, "On the Crack Extension in Plates Under Plane Loading and Transverse Shear," ASME J. Basic Eng., pp. 519-527.
41. Salahizadeh, H., and Saka, N., 1992, "Crack Propagation in Rolling Line Contact," ASME J. Tribol., 114, pp. 690-697.
42. Anderson, T. L., 1991, Fracture Mechanics; Fundamentals and Application, CRC Press, Inc., FL.
43. Kanninen, M. F., and Popelar, C. H., 1985, Advanced Fracture Mechanics, Oxford University Press, New York.
44. Paris, P., and Erdogan, F., 1963, "A Critical Analysis of Crack Propagation Laws," ASME J. Basic Eng., pp. 528-534.
45. Fleming, J. R., and Suh, N. P., 1977, "Mechanics of Crack Propagation in Delamination Wear," Wear, 44, pp. 39-56.
46. Sin, H.-C., and Suh, N. P., 1984, "Subsurface Crack Propagation Due to Surface Traction in Sliding Wear," ASME J. Appl. Mech., 51, pp. 317-323.
47. Hertbberg, R. W., 1996, Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley and Sons, New York.
48. Dubourg, M. C., and Lamacq, V., 2000, "Stage II Crack Propagation Direction Determination Under Fretting Fatigue Loading: A New Approach in Accordance With Experimental Observations," Fretting Fatigue: Current Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran, and C. B. Elliot III, eds., pp. 436-450.
49. Nishioka, K., and Hirakawa, K., 1969, "Fundamental Investigations of Fretting Fatigue-Part 3: Some Phenomena and Mechanisms of Surface Cracks," Bull. JSME, 12(51), pp. 397-407.
50. Kondoh, K., and Mutoh, Y., 2000, "Crack Behavior in Early Stage of Fretting Fatigue Fracture," Fretting Fatigue: Current Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran, and C. B. Elliot III, eds., pp. 436-450.
51. Cook, R. D., Malkus, D., and Plesha, M. E., 1989, Concepts and Applications of Finite Element Analysis, 3rd ed., John Wiley & Sons, New York.
52. Segerlind, L. J., 1976, Applied Finite Element Analysis, John Wiley & Sons Inc., New York.
53. Endo, K., 1981, "Practical Observations of Initiation and Propagation of Fretting Fatigue Cracks," Fretting Fatigue, R. B. Waterhouse, ed., Applied Science Publishers Ltd., London, UK, pp. 127-141.
54. Attia, M. H., 1977, "Review and Assessment of the Work Rate Concept for Predicting Fretting Wear Rate of Steam Generator Tubes," Report No. A-NSG-94-35-P, Ontario Hydro Technologies, Ontario, Canada.