Determination of unidirectional heat transfer coefficient during unsteady-state solidification at metal casting-chill interface

Energy Conversion and Management

Volumn 47, Issue 1, 2006, Pages 19-34

  Şahin, Haci Mehmet ^a   Kocatepe, Kadir ^a   Kayikci, Ramazan ^b   Akar, Neşet ^a  

^a GAZI UNIVERSITY   (Turkey)

^b SAKARYA UNIVERSITY   (Turkey)

Author keywords

Al Si eutectic; Casting mold interface; Heat transfer coefficient

Indexed keywords

ALUMINUM CASTINGS; EUTECTICS; FINITE DIFFERENCE METHOD; HEAT CONDUCTION; INVERSE PROBLEMS; METAL CASTING; SOLIDIFICATION; THERMOCOUPLES;

AL-SI EUTECTIC; CASTING-MOLD INTERFACE; INTERFACIAL HEAT TRANSFER COEFFICIENT (IHTC); INVERSE HEAT CONDUCTION PROBLEM (IHCP);

HEAT TRANSFER COEFFICIENTS;

EID: 24944525449     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2005.03.021     Document Type: Article

References (40)

1. W.D. Griffiths The heat-transfer coefficient during the unidirectional solidification of an Al-Si alloy casting Metall Mater Trans B 30 1999 473 482
2. R. KayIkcI, and W.D. Griffiths The influence of surface roughness on interfacial heat transfer during casting solidification Foundryman 1999 267 273
3. S. Sulaiman, and A.M.S. Hamouda Modeling of the thermal history of the sand casting process J Mater Process Technol 113 2001 245 250
4. K. Narayam-Prabhu, D. Madheswaran, T.S. Prasanna-Kumar, and N. Venkataraman Computer modeling of heat flow and microstructure fineness in chill-cast aluminum alloy LM-24 AFS Trans 100 1992 611 617
5. K. Narayam-Prabhu, G. Srinivas, and N. Venkataraman Modeling heat transfer and solidification behavior of gravity die cast Al-Cu-Si alloy (LM21) plates AFS Trans 101 1993 653 659
6. D.G.R. Sharma, and M. Krishnan Simulation of heat transfer at casting metal-mold interface AFS Trans 99 1991 429 438
7. K.A. Woodbury, Q. Ke, and T.S. Piwonke Mold-metal interfacial heat transfer coefficients during resin-bonded sand casting of aluminum A356 AFS Trans 108 2000 259 265
8. S.V. Shepel, and S. Paolucci Numerical simulation of filling and solidification of permanent mold castings Appl Thermal Eng 22 2002 119 248
9. G. Fortin, P. Louchez, and F.H. Samuel Factors controlling heat transfer coefficients at the metal-mold interface during solidification of aluminum alloys: an analytical study AFS Trans 100 1992 863 871
10. C.A. Muojekwu, I.V. Samarasekera, and J.K. Brimacombe Heat transfer and microstructure during the early stages of metal solidification Metall Mater Trans B 26 1995 361 382
11. M. Trovant, and S.A. Argyropoulos The Implementation of a mathematical model to characterize mold metal interface effects in metal casting Can Metall Quart 37 1998 185 196
12. Santos CA, Quaresma JMV, Garcia A, Siqueria CA, Spim JA. Metal/mold heat transfer coefficients during horizontal and vertical unsteady-state solidification of Al-Cu and Sn-Pb Alloys. In: 4th Int. Conf. on problems in engineering, Rio de Janerio, Brazil, 2002.
13. C.A. Santos, J.M.V. Quaresma, and A. Garcia Determination of transient interfacial heat transfer coefficients in chill mold casting J Alloys Compd 319 2001 174 186
14. T.-G. Kim, and Z.-H. Lee Time-varying heat transfer coefficients between tube-shaped casting and metal mold Int J Heat Mass Transfer 40 1997 3513 3525
15. J.G. Hartley, and J.A.L. Patterson The influence of temperature, moisture content and binder content on the conductivity of dried bentonite-bonded zircon and silica sands AFS Trans 91 1983 183 190
16. W.D. Griffiths A model of the interfacial heat-transfer coefficient during the unidirectional solidification of an aluminum alloy Metall Mater Trans B 31 2000 285 294
17. J.C. Hwang, H.T. Chuang, S.H. Jong, and W.S. Hwang Measurement of heat transfer coefficient at metal/mold interface during casting AFS Trans 102 1994 877 883
18. M. Krishnan, and D.G.R. Sharma Determination of the interfacial heat transfer coefficient h in unidirectional heat flow by Beck's non linear estimation procedure Int Commun Heat Mass Transfer 23 1996 203 214
19. K. Ho, and R.D. Pehlke Transient methods for determination of metal-mold interfacial heat transfer AFS Trans 91 1983 689 698
20. K. Ho, and R.D. Pehlke Mechanisms of heat transfer at a metal-mold interface AFS Trans 92 1984 587 598
21. J. Isaac, G.P. Reddy, and G.K. Sharma Experimental investigation of the influence of casting parameters on the formation and distribution of air gap during the solidification of casting in metallic molds AFS Trans 93 1985 29 34
22. M.A. Martorano, and J.D.T. Capocchi Heat transfer coefficient at the metal-mold interface in the unidirectional solidification of Cu-8%Sn alloys Int. J. Heat Mass Transfer 43 2000 2541 2552
23. S. Khan, C. Ravindran, D. Naylor, and D.G.R. Sharma Measurement of interface heat transfer coefficient LFC of A356 Al alloy AFS Trans 108 2000 445 452
24. Y. Nishida, and H. Matsubara Effect of pressure on heat transfer at the metal-mould interface Br Foundryman 69 1976 274 278
25. L.J.D. Sully The thermal interface between castings and chill molds AFS Trans 84 1976 735 744
26. J.A. Sekhar, G.J. Abbaschian, and R. Mehrabian Effect of pressure on metal-die heat transfer coefficient during solidification Mater Sci Eng 40 1979 105 110
27. K. Ho, and R.D. Pehlke Metal-mold interfacial heat transfer Metall Trans B 16 1985 585 595
28. Y. Nishida, W. Droste, and S. Engler Air-gap formation process at the casting-mold interface and the heat transfer mechanism through the gap Metall Trans B 17 1986 833 844
29. F. Chiesa Measurement of the thermal conductance at the mold/metal interface of permanent molds AFS Trans 98 1990 193 200
30. N.A. El-Mahallawy, and A.M. Assar Effect of melt superheat on heat transfer coefficient for aluminium solidifying against copper chill J Mater Sci 26 1991 1729 1733
31. J. Isaac, G. Reddy, and G.K. Sharma Variations of heat transfer coefficients during solidification of castings in metallic moulds Br Foundryman 78 1985 465 468
32. M. Krishnan, and D.G.R. Sharma Determination of heat transfer coefficient between casting and chill in unidirectional heat flow AFS Trans 102 1994 769 774
33. T.G. Kim, and Z.H. Lee Time-varying heat transfer coefficients between tube-shaped casting and metal mold Int J Heat Mass Transfer 40 1997 3513 3525
34. J.A. Hines Determination of interfacial heat-transfer boundary condition in aluminum low-pressure permanent mold test casting Metall Mater Trans 35 2004 299 311
35. C.P. Hallam, and W.D. Griffiths A model of the interfacial heat-transfer coefficient for the aluminum gravity die-casting process Metall Mater Trans 35 2004 721 733
36. Hallam, CP. Heat Transfer between Solidifying Aluminum and Coated Dies. PhD Transfer Report. Manchester University, Materials Science Centre; 1998.
37. KayIkcI, R. Metal-Mold Contact and Heat Transfer during Casting Solidification. Ph.D. thesis. The University of Manchester; 1999.
38. V.S. ArpacI, S.-H. Kao, and A. Selamet Introduction to heat transfer 1999 Prentice Hall NJ p. 212-4
39. M.N. ÖzIşIk Finite difference methods in heat transfer 1994 CCR Florida p. 100-10
40. F.P. Incropera, and D.P. DeWitt Fundamentals of heat and mass transfer 4th ed. 1996 John Wiley & Sons New York p. 248-52