Estimation of corrosion damage in steel reinforced mortar using guided waves

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 127, Issue 3, 2005, Pages 255-261

  Reis, Henrique ^a   Ervin, Benjamin L ^a   Kuchma, Daniel A ^a   Bernhard, Jennifer T ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Accelerated corrosion tests; Mortar; Reinforced concrete; Ultrasonics; Waveguides

Indexed keywords

ACCELERATED CORROSION TESTS; CORRODING REINFORCEMENT; DEICING SALT; STEEL REINFORCED MORTAR;

CORROSION; MORTAR; SALTS; SENSORS; STEEL; ULTRASONICS; WAVEGUIDES;

REINFORCED CONCRETE;

EID: 24944468159     PISSN: 00949930     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1989352     Document Type: Conference Paper

References (44)

1. Uhlig's Corrosion Handbook, 2000, edited by R. W. Revie, 2nd ed., Wiley, NY.
2. Aktan, A. E., and Grimmelsman, K. A., 1999 "The Role of NDE in Bridge Health-Monitoring," Proc. SPIE, 3587, pp. 2-15.
3. Fuhr, T. P., Ambrose, T. P., Huston, D. R., and McPadden, A. J., 1995, "Fiber Optic Corrosion Sensing for Bridges and Roadway Surfaces," Proceedings of the Smart Systems for Bridges, Structures, and Highways Conference, Vol. 2446, San Diego, pp. 2-8.
4. Green, R. E. Jr., 1988, "Current and Emerging Techniques for the Nondestructive Evaluation of Civil Structures," Proceedings of the International Workshop on Nondestructive Evaluation for Performance of Civil Structures, Los Angeles, pp. 81-99.
5. Khan, M. S., Washer, G. A., and Chase, S. B., 1998, "Evaluation of Dual-Band Infrared Thermography System for Bridge Deck Delamination Surveys," Proc. SPIE, 3400, pp. 224-235.
6. del Grande, N. K. and Durbin, P. F., 1999, "Delamination Detection in Reinforced Concrete Using Thermal Inertia." Proc. SPIE, 3587, pp. 186-197.
7. Kesner, K., Sansalone, M., and Poston, R. W., 1998, "Detection of Distributed Damage in Concrete Using Transient Stress Waves," Proc. SPIE, 3400, pp. 386-397.
8. Krieger, J., Krause, M., and Wiggenhauser, H., 1998 "Tests and Assessments of NDT Methods for Concrete Bridges," Proc. SPIE, 3400, pp. 258-269.
9. Vurpillot, S., Inaudi, D., and Ducret, J.-M., 1996, "Bridge Monitoring by Fiber Optic Deformation Sensors: Design, Emplacement and Results," Proc. SPIE, 2719, pp. 141-149.
10. Griffiths, R. W., 1998, "Recent and Current Developments in Distributed Fiber Optic Sensing for Structural Monitoring," Proc. SPIE, 985, pp. 69-76.
11. Huston, D. R., Fuhr, P. L., Beliveau, J.-G., and Spillman, W. B., 2001, "Structure Member Vibration Measurement Using a Fiber Optic Sensor," J. Sound Vib., 149(2) pp. 348-353.
12. Caussignac, J. M., Chabert, A., Morel, G., Rogez, P., and Scantier, J., 1992, "Bearing of a Bridge Fitted with Load Measuring Devices Based on an Optical Fiber Technology," Proceeding of the 1st European Conference on Smart Structures and Materials, Glasgow, pp. 147-150.
13. Kuchma, D. A., Bernhard, J., and Reis, H., 2002, "A Wireless Embedded Sensor System to Monitor and Assess Corrosion in the Tendons of Prestressed Concrete Girders," Proceeding of the US-Korea Workshop on Smart Structural Systems, Busan, Korea, August 23-24, pp. 273-282.
14. Pavlakovic, B., and Löwe, M., 1998 "A General Purpose Approach to Calculating the Longitudinal and Flexural Modes of Multi-layered, Embedded, Transversely Isotropic Cylinders," Review of Progress in Quantitative Nondestructive Evaluation, Vol. 18A, edited by D. 0. Thomson and D. E. Chimenti, Plenum Press, NY, pp. 1557-1564.
15. Al-Sulaimani, G. J., Kaleemullah, M., Busanbul, I. A., and Rasheeduzzafar, F., 1990, "Influence of Corrosion and Cracking on Bond Behavior and Strength of Reinforced Concrete Members," ACI Struct. J. 87(2), pp. 220-231.
16. Almuysallam, A. A., Al-Gahtani, A. S., Aziz, A. R. Dakhil, F. H., and Rasheeduzzafar, F., 1996, "Effect of Reinforcement Corrosion on Flexural Behavior of Concrete Slabs," J. Mater. Civ. Eng., 8(3), pp. 123-127.
17. Dagher, H. J. and Kulendran, S., 1992, "Finite Element Modelling of Corrosion Damage in Concrete Structures," ACI Struct. J. 89(6), pp. 699-708.
18. Siwiec, P., Moczko, A. T., and Stroeven, P., 1994, Study of Steel Bar Corrosion by Experimental and Analytical Simulation, DIANA Computational Mechanics 94, G.M.A, edited by Kusters and M. A. N. Hendriks, Kluwer Academic Publishers, The Netherlands, pp 383-394.
19. Broomfield, J. P., 1997, Corrosion of Steel in Concrete: Understanding, Investigation, and Repair, E & FN Spon, London.
20. Liu, Y., 1996, "Modeling the Time-to-Corrosion Cracking of the Cover Concrete in Chloride Contaminated Reinforced Concrete Structures," Ph.D. thesis, Virginia Polytechnic Institute and State University, Blacksburg, 1996.
21. Bentur, A., Diamond, S., and Berke, N. S. 1997, Steel Corrosion in Concrete: Fundamentals and Civil Engineering Practice, E & FN Spon, London.
22. Aquino, W., 2002 "Long-Term Performance of Seismically Rehabilitated Corrosion-Damaged Columns," Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
23. Cabrera, J. G., 1996, "Deterioration of Concrete Due to Reinforcement Steel Corrosion," Cem. Concr. Compos., 18, pp. 47-59.
24. Amleh, L., and Mirza, S., 1999, "Corrosion Influence on Bond between Steel and Concrete," ACI Struct. J., 96 (3), pp. 415-423.
25. Pochhammer, L., 1876, "Uber die Fortpflanzungsgeschwindigkeiten Kleiner Schwingungen in Einem Unbegrenzten Isotropen Kreiszylinder," J. Reine Angew. Math. 81, pp 324-336.
26. Chree, C., 1889, "The Equations of an Isotropie Elastic Solid in Polar and Cylindrical Co-ords., their Solutions and Applications," Trans. Cambridge Philos. Soc., 14, pp. 250-369.
27. Bancroft, D., "The Velocity of Longitudinal Waves in Cylindrical Bars," 1941, Phys. Rev., 59, pp. 588-593.
28. Rose, J. L., 1999 Ultrasonic Waves in Solid Media, University Press, Cambridge; UK.
29. Beard, M. D., 2002 Guided Wave Inspection of Embedded Cylindrical Structures," Ph.D. thesis, University of London.
30. Pavlakovic, B., Lowe, M. J. S., and Cawley, P., 1999, "The Inspection of Tendons in Post-Tensioned Concrete Using Guided Ultrasonic Waves," Insight, 41(7), pp. 446-452.
31. Na, W., Kundu, T., and Ehsani, M. R., 2002, "Ultrasonic Guided Waves for Steel Bar Concrete Interface Testing," Mater. Eval., 60(3), pp. 437-444.
32. Na, W., Kundu, T., and Ehsani, M. R., 2003, "A Comparison of Steel/Concrete and Glass Fiber Reinforced Polymers/Concrete Interface Testing by Guided Waves," Mater. Eval., 61(2), pp. 155-161.
33. Lowe, M. J. S., 1995, "Matrix Techniques for Modeling Ultrasonic Waves in Multilayered Media," IEEE Trans. Ultrason. Ferroelectr. Freq. Control 42(4), pp. 525-542.
34. Nguyen, T. H., Smart, C. D., and Lynnworth, L. C., 2004, "Transverse Shear to Torsion Mode Converter and Applications," Mater. Eval., 62(6), pp. 690-698.
35. Vary, A., 1988, "The Acousto-Ultrasonic Approach," Acousto-Ultrasonics: Theory and Application, edited by J. C. Duke, Jr., Plenum Press, NY.
36. Wu, C. S., and Chang, F. K., 2001, "A Built-in Active Sensing Diagnostic System for Civil Infrastructure Systems," Proceedings of SPIE: Smart Structures and Materials 200]-Smart Systems for Bridges, Structures, and Highways, Newport Beach, 4330 pp. 27-35.
37. Wang, C. S., Wu, F., and Chang, F. K., 2001, "Structural Health Monitoring from Fiber-Reinforced Composites to Steel-Reinforced Concrete," Smart Mater. Struct., 10(3), pp 548-552.
38. Pavlakovic, B., and Lowe, M. J. S., 2001, Disperse User's Manual Version 2.0.11, Imperial College, University of London.
39. Mangat, P. S., and Elgarf, M. S., 1999, "Flexural Strength of Concrete Beams with Corroding Reinforcement," ACI Struct. J., 96(1), pp. 149-158.
40. Stanish, K., Hooton, R. D., and Pantazopoulou, S. J., 1999, "Corrosion Effects on Bond Strength in Reinforced Concrete," ACI Struct. J., 96(6), pp. 915-921.
41. Auyeung, Y., Balaguru, P., and Chung, L., 2000, "Bond Behavior of Corroded Reinforcement Bars," ACI Mater. J., 97(2) pp. 214-220.
42. Lee, C., Bonacci, J. F., Thomas, M. D. A., Maalej, M., Khajehpour, S., Hearn, N., Pantazopoulou, S., and Sheikh, S., 2000, "Accelerated Corrosion and Repair of Reinforced Concrete Columns using Carbon Fibre Reinforced Polymer Sheets," Can. J. Civ. Eng. 27, pp. 941-948.
43. Soudki, K. A. and Sherwood, T. G., 2000, "Behaviour of Reinforced Concrete Beams Strengthened with Carbon Fibre Reinforced Polymer Laminates subjected to Corrosion Damage," Can. J. Civ. Eng., 27, pp. 1005-1010.
44. Corrosion of Steel in Concrete: Report of the Technical Committee 60-CSC RILEM, 1988, edited by P. Schiessl, Chapman and Hall, NY.