Inclusion assisted microstructure control in C-Mn and low alloy steel welds

Materials Science and Technology

Volumn 21, Issue 8, 2005, Pages 867-879

  Koseki, T ^a   Thewlis, G ^b  

^a UNIVERSITY OF TOKYO   (Japan)

^b SWINDEN TECHNOLOGY CENTRE   (Netherlands)

Author keywords

Acicular ferrite; Heat affected zones; Inclusions; Intergranular ferrite; Phase transformations; Weld metal

Indexed keywords

DISPERSIONS; FERRITES; GRAIN BOUNDARIES; HEAT AFFECTED ZONE; INCLUSIONS; MICROSTRUCTURE; NUCLEATION; PHASE TRANSITIONS; STEEL; TOUGHNESS;

ACICULAR FERRITE; INTERGRANULAR FERRITE; LOW ALLOY STEEL; STEEL WELDS; WELD METAL;

WELDS;

EID: 24944466563     PISSN: 02670836     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328405X51703     Document Type: Review

References (81)

1. R. C. Cochrane: Weld. World, 1983, 21, (1/2), 16-24.
2. N. Mori, H. Homma, M. Wakabayashi and S. Ohkita: J. Jpn. Weld. Soc., 1981, 786.
3. I. Watanabe and T. Kojima: J. Jpn. Weld. Soc., 1983, 52, 223.
4. D. J. Abson and R. J. Pargeter: Int. Met. Rev., 1986, 31, (4), 141-194.
5. H. K. D. H. Bhadeshia: 'Bainite in steels'; 1992, London, The Institute of Materials.
6. O. Grong and D. K. Matlock: Int. Met. Rev., 1986, 31, 27-48.
7. D. J. Abson: 'Small particles in weld metals'; 1987, IIW Document IXJ-122-87.
8. R. A. Farrar and P. L. Harrison: J. Mater. Sci., 1987, 22, 3812.
9. G. Thewlis, J. A. Whiteman and D. J. Senogles: Mater. Sci. Technol., 1997, 13, 257-274.
10. G. Thewlis: Sci Tech. Weld. Joining, 2000, 5, (6), 365-377.
11. P. T. Oldland, C. W. Ramsey, D. K. Matlock and D. L. Olsen: Weld. J. Res. Suppl., 1989, 68, (4), 158s-168s.
12. X. B. Yang: 'Microstructure and mechanical properties in high strength, low alloy, C-Mn arc welds', PhD thesis, University of Birmingham, May 2002.
13. C. Shiga: Proc. Int. Conf. on The metallurgy, welding and qualification of microalloyed (HSLA) steel weldments', November 1990, Houston, Texas, 327-350.
14. H. W. Kerr: Int. J. Pres. Ves. Piping, 1976, 4, 119-141.
15. O. Grong and O. M. Akselsen: Met. Constr., 1986, 18, 557-562.
16. H. G. Pisarski and R. G. Pargeter: Met. Constr., 1984, 16, 412-417.
17. K. Yamamoto, S. Matsuda, T. Haze, R. Chijiiwa and H. Mimura: 'Residual and unspecified elements in steel', ASTM-STP 1042, 266; 1989, Philadelphia, PA, ASTM.
18. C. Eijk, O. Grong and J. Hjelen: 'Solid-solid phase transformations II', (ed. M. Koiwa et al.), 1573; 1999, Sendai, Japan. Inst. Metals.
19. T. Funakoshi, T. Tanaka, S. Ueda, M. Ishikawa, N. Koshizuka and K. Kobayashi: Tetsu-to-Hagane, 1977, 63, 303;
20. Trans. ISIJ, 1977, 17, 419-427.
21. G. Thewlis: 'Stable sulphide particle dispersed steel', Patent Applications WO 01/66183 and GB 2363802, March 2000, Corus UK Ltd.
22. C. Eijk, O. Grong and J. Walmsley: Mater. Sci. Technol., 2000, 16, 55-64.
23. J.-S. Byun, J.-H. Shim, Y. W. Cho and D. N. Lee: Acta Mater., 2003, 51, 1593-1606.
24. G. Shigesato and M. Sugiyama: J. Elect. Microsc., 2002, 51, 359-367.
25. H. Mabuchi, R. Uemori and M Fujioka: ISIJ Int., 1996, 36, 1406-1412.
26. H. Goto, K. Miyazawa, W. Yamada and K Tanaka: ISIJ Int., 1995, 35, 708-714.
27. T. Sawai, M. Wakoh, Y. Ueshima and S. Mizoguchi: ISIJ Int., 1992, 32, 169-173.
28. J.-H. Shim, J.-S. Byun, Y.W. Cho, Y.-J. Oh, J.-D. Shim and D. N. Lee: ISIJ Int., 2000, 40, 819-823.
29. R. A. Ricks, P. R. Howell and G. S. Barritte: J. Mater. Sci., 1982, 17, 732-740.
30. P. L. Harrison and R. A. Farrar: Met. Constr., 1987, 19, 392r-399r.
31. P. L. Harrison and R. A. Farrar: Met. Constr., 1987, 19, 447r-450r.
32. G. Thewlis: Mater. Sci. Technol., 2004, 20, 143-160.
33. G. Thewlis: Join. Mater., 1989, (1), 25-31.
34. G. Thewlis: Join. Mater., 1989, (3), 125-129.
35. G. S. Barritte and D. V. Edmonds: Proc. Int. Conf. on 'Advances in the physical metallurgy and applications of steel', Liverpool, (8), 126-135; 1981, London, The Metals Society.
36. B. R. Keville and R. C. Cochrane: Proc. Int. Conf. on 'Trends in steels and consumables for welding', Paper No. 28, 1978, Abington, Cambridge, The Welding Institute.
37. P. L. Harrison: 'Continuons cooling tranformation kinetics and microstructure of mild and low alloy steel weld metals' PhD thesis, 1982, University of Southampton.
38. G. Thewlis: Mater. Sci. Technol., 1994, 10, 110-125.
39. E. Annelli: 'Heterogeneous nucleation of acicular ferrite for toughness improvement of HSLA steels', ECSC Research Contract 7210-PR/037 (97-D3·05a, b,c,d,e).
40. M. E. Saggese, A. R. Bhatti, D. N. Hawkins and J. A. Whiteman: Proc. Int. Conf. on 'Effect of residual, impurity and microalloying elements on weldability and weld properties', Paper No. 15, 1983, Abington, Cambridge, The Welding Institute.
41. T. Koseki, S. Ohkita and N. Yurioka: Sci. Technol. Weld. Join., 1997, 2, 65.
42. S. Ohkita and Y. Horii: ISIJ Int., 1995, 35, 1170.
43. Y. Horii: 'Effect of chemical composition on strength and toughness of welds made by large heat input submerged arc welding', PhD thesis, Osaka University, 1995.
44. P. L. Harrison: Weld. Inst. Bull., 1989, (1), 13-15.
45. P. L. Harrison: Weld. Inst. Bull., 1989, (2), 65-67.
46. G. Thewlis, A. Ball and J. A. Whiteman: Unpublished work.
47. Y. Ito and M. Nakanishi: Sumitomo Search, 1976, 15, 42-62.
48. O. Grong: 'Metallurgical modelling of welding'; 1994, London, The Institute of Materials.
49. G. M. Evans: Oerlikon Schweissmitt., 1991, 49, (125), 22-33.
50. Y. Horii, K. Ichikawa, S. Ohkita, S. Funaki and N. Yurioka: Q. J. Jpn. Weld. Soc., 1995, 13, (4), 500-507.
51. G. M. Evans: Met. Constr., 1986, 18, (9), 631R-636R
52. J. M. Dowling, J. M. Corbett and H. W. Kerr: Metall. Trans. A, 1986, 17A, 1611.
53. M. Es-Souni and P. A. Beaven: Surf. Interf. Anal., 1990, 16, 504-509.
54. S. A. Court and G. Pollard: J. Mat. Sci. Lett., 1985, 4, 427-430.
55. E. S. Kayali, J. M. Corbett and H. W. Kerr: J. Mat. Sci. Lett., 1983, 2, 123-128.
56. F. B. Pickering: 'Inclusions'; 1979, London, Institute of Metallurgists.
57. T. Gladman: 'The physical metallurgy of microalloyed steels'; 1997, London, Institute of Materials.
58. D. T. Llewellyn and W. T Cook: Met. Technol., 1974, (1), 517-529.
59. Ph. Maitrepierre, J. Rofes-vernis and D. Thivellier: in 'Boron in steels', Proc. Metallurical Society of the AIME, Milwaukee, Wisconsin, 1-18; 1979, AIME.
60. Y. Ohno, K. Uchino, S. Matsuda, T. Satoh, Y. Okamura, K. Yamamoto and K. Ikeda: Nippon Steel Tech. Rep. No. 36, 1988, 49-59.
61. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga and K. Okamoto: ISIJ Int., 1994, 34, 829-835.
62. Y. Ohno, Y. Okamura, S. Matsuda, K. Yamamoto and T. Mukai: Tetsu-to-Hagane, 1987, 73, 1010.
63. M. Nishimori, T. Hayashi, H. Kawabata and K. Amano: Curr. Adv. Mater. Process., 1997, 10, 592.
64. T. Ichinose, H. Okaguchi and Y. Komizo: Curr. Adv. Mater. Process., 1998, 11, 531.
65. S. J. Jones: 'Modelling inclusion potency and simultaneous transformation kinetics in steels', PhD Thesis, University of Cambridge, September 1996.
66. A. R. Mills, G. Thewlis and J. A. Whiteman: Mater. Sci. Technol., 1987, 3, 1051-1061.
67. B. L. Bramfitt: Met. Trans., 1970, 1, 1987-1995.
68. O. Grong, A. O. Kluken, H. K. Hylund, A. L. Dons and J. Hjelen: Met. Mat. Trans. A, 1995, 26A, 525-533.
69. E. C. Bain: Trans. Am. Inst. Min. Eng., 1924, 70, 25-46.
70. M. Strangwood and H. K. D. H. Bhadeshia: Proc. Int. Conf. on 'Advances in welding science and technology', Gatlinberg, TN, 1986, 209-213; 1986, Metals Park, OH, ASM Int.
71. J. R. Yang and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1989, 5, 93-97.
72. A. O. Kluken, O. Grong and J. Hjelen: Met. Trans. A, 1991, 22A, 657-663.
73. S. Kanazawa, A. Nakashima, K. Okamoto and K. Kanaya: Tetsu-to-Hagane, 1975, 61, 2589;
74. Trans. ISIJ, 1976, 16, 486-495.
75. G. Thewlis: Corus RD &T Ref. 112092, Report No STC/SMT LPC/KR/08799/2004/R.
76. G. Myamoto, T. Furuhara and T. Maki: Curr. Adv. Mater. Process., 2001, 14, 1172.
77. H. Homma, H. Ohkita, S. Matsuda and K. Yamamoto: Welding J., 1987, 66s-301s.
78. K. Yamamoto, T. Hasegawa and J. Takamura: ISIJ Int., 1996, 36, 80-86.
79. T. Hanamura, H. Shibata, Y. Waseda, H. Nakajima, S. Torizuka, T. Takanashi and K. Nagai: ISIJ Int., 1999, 11, 1188-1193.
80. J. Takamura and S. Mizoguchi: Proc. 6th Iron and Steel Cong., Nagoya, Japan, 1990, Part 1, 591-597; 1990, Tokyo, ISIJ.
81. H. Mabuchi and H. Nakao: Trans. ISIJ, 1981, 21, 495-501.