메뉴 건너뛰기




Volumn 213, Issue 1, 1999, Pages 47-58

Structural performance of thick adherend steel - Composite adhesive joints

Author keywords

Adhesive; Composite; Failure mechanisms; Joint design; Joint strength; Panel

Indexed keywords


EID: 2442529570     PISSN: 14644207     EISSN: None     Source Type: Journal    
DOI: 10.1243/1464420991544601     Document Type: Article
Times cited : (4)

References (23)
  • 1
    • 0003295449 scopus 로고
    • Composites in offshore structures
    • Eds R.A. Shenoi and J.F. Wellicome, Cambridge University Press, Cambridge
    • Gibson, A. G. Composites in offshore structures. In Composite Materials in Maritime Structures (Eds R.A. Shenoi and J.F. Wellicome), 1993, p. 199 (Cambridge University Press, Cambridge).
    • (1993) Composite Materials in Maritime Structures , pp. 199
    • Gibson, A.G.1
  • 3
    • 33746697637 scopus 로고
    • The use of adhesive in the repair of cracks in ships' structures
    • Bristol, Mechanical Engineering Publications, London
    • Allan, R. C., Bird, J. and Clarke, J. I). The use of adhesive in the repair of cracks in ships' structures. In Proceedings of the First SAE Conference, Bristol, 1986 (Mechanical Engineering Publications, London).
    • (1986) Proceedings of the First SAE Conference
    • Allan, R.C.1    Bird, J.2    Clarke, J.I.3
  • 4
    • 0001984533 scopus 로고
    • Recherches sur la théorie des assemblages colles
    • Volkersen, O. Recherches sur la théorie des assemblages colles. Construction Métallique, 1965, 4, 3.
    • (1965) Construction Métallique , vol.4 , pp. 3
    • Volkersen, O.1
  • 5
    • 12744257854 scopus 로고
    • Designing to minimise peel stresses in adhesive-bonded joints
    • Ed. W.S. Johnson, ASTM STP 876, American Society for Testing and Materials, Philadelphia, Pennsylvania
    • Hart-Smith, L. J. Designing to minimise peel stresses in adhesive-bonded joints. In Delamination and Debonding of Materials (Ed. W.S. Johnson), ASTM STP 876, 1985 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
    • (1985) Delamination and Debonding of Materials
    • Hart-Smith, L.J.1
  • 6
    • 0016082083 scopus 로고
    • Stress analysis of adhesive-bonded lap joint
    • Adams, R. D. and Peppiatt, N. A. Stress analysis of adhesive-bonded lap joint. J. Strain Analysis, 1974, 9(3), 185.
    • (1974) J. Strain Analysis , vol.9 , Issue.3 , pp. 185
    • Adams, R.D.1    Peppiatt, N.A.2
  • 8
    • 84989093788 scopus 로고
    • Strength model of adhesive bonded composite pipe joints under tension
    • Griffin, S. A., Pang, S. S. and Yang, C. Strength model of adhesive bonded composite pipe joints under tension. Polym. Engng Sci., 1991, 31(7), 533.
    • (1991) Polym. Engng Sci. , vol.31 , Issue.7 , pp. 533
    • Griffin, S.A.1    Pang, S.S.2    Yang, C.3
  • 9
    • 33746762126 scopus 로고
    • Practical design of joints and attachments
    • Eds R.A. Shenoi and J.F. Wellicome, Cambridge University Press, Cambridge
    • Shenoi, R. A. and Hawkins, G. L. Practical design of joints and attachments. In Composite Materials in Marine Structures (Eds R.A. Shenoi and J.F. Wellicome), 1993, p. 63 (Cambridge University Press, Cambridge).
    • (1993) Composite Materials in Marine Structures , pp. 63
    • Shenoi, R.A.1    Hawkins, G.L.2
  • 10
    • 85034489645 scopus 로고
    • The use of flexible resin to improve bond connections in GRP ship constructions
    • Paris, IITT International, Nice
    • Bird, J. and Bashford, D. The use of flexible resin to improve bond connections in GRP ship constructions. In Proceedings of the Conference on Composites, Paris, 1988 (IITT International, Nice).
    • (1988) Proceedings of the Conference on Composites
    • Bird, J.1    Bashford, D.2
  • 11
    • 0028531175 scopus 로고
    • Non-linear analysis and optimization of adhesively bonded single lap joints between fibre-reinforced plastics and metals
    • Hildebrand, M. Non-linear analysis and optimization of adhesively bonded single lap joints between fibre-reinforced plastics and metals. J. Adhesion Adhes., 1994, 14(4), 261.
    • (1994) J. Adhesion Adhes. , vol.14 , Issue.4 , pp. 261
    • Hildebrand, M.1
  • 12
    • 0019896944 scopus 로고
    • A review of the strength of joints in fibre-reinforced plastics. Part 2: Adhesively bonded joints
    • Matthews, F. L., Kilty, P. F. and Godwin, E. W. A review of the strength of joints in fibre-reinforced plastics. Part 2: adhesively bonded joints. J. Composites, 1982, 10, 29.
    • (1982) J. Composites , vol.10 , pp. 29
    • Matthews, F.L.1    Kilty, P.F.2    Godwin, E.W.3
  • 13
    • 0023795923 scopus 로고
    • The properties and uses of marine structural materials
    • Chalmers, D. W. The properties and uses of marine structural materials. J. Mar. Structs, 1988, 1, 47.
    • (1988) J. Mar. Structs , vol.1 , pp. 47
    • Chalmers, D.W.1
  • 14
    • 33746718608 scopus 로고
    • Test procedures and standards
    • Eds R.A. Shenoi and J.F. Wellicome, Cambridge University Press, Cambridge
    • Sims, G. D. Test procedures and standards. In Composite Materials in Marine Structures (Eds R.A. Shenoi and J.F. Wellicome), 1993, p. 316 (Cambridge University Press, Cambridge).
    • (1993) Composite Materials in Marine Structures , pp. 316
    • Sims, G.D.1
  • 15
    • 85034504059 scopus 로고    scopus 로고
    • Hibbitt, Karlsson and Sorenson Inc., Providence, Rhode Island
    • ABAQUS v5.7 Manual, 1997 (Hibbitt, Karlsson and Sorenson Inc., Providence, Rhode Island).
    • (1997) ABAQUS V5.7 Manual
  • 16
    • 0346887354 scopus 로고
    • Failure prediction in adhesive joints by various techniques including the modelling of crack development
    • Bristol, Institute of Materials, London
    • Richerdson, G., Crocombe, A. D. and Smith, P. A. Failure prediction in adhesive joints by various techniques including the modelling of crack development. In Proceedings of the Fourth SAE Conference, Bristol, 1995, p. 45 (Institute of Materials, London).
    • (1995) Proceedings of the Fourth SAE Conference , pp. 45
    • Richerdson, G.1    Crocombe, A.D.2    Smith, P.A.3
  • 17
    • 0032266754 scopus 로고    scopus 로고
    • The integrity of bonded joints in large composite pipes
    • Hashim, S. A., Cowling, M. J. and Lafferty, S. The integrity of bonded joints in large composite pipes. J. Adhesion Adhes., 1998, 18, 421.
    • (1998) J. Adhesion Adhes. , vol.18 , pp. 421
    • Hashim, S.A.1    Cowling, M.J.2    Lafferty, S.3
  • 19
    • 33746776075 scopus 로고
    • Stress analysis: A continuum mechanics approach
    • Ed. A.J. Kinloch, Chapman and Hall, London
    • Hart-Smith, L. J. Stress analysis: a continuum mechanics approach. In Adhesive Development - 2 (Ed. A.J. Kinloch), 1987, p. 1 (Chapman and Hall, London).
    • (1987) Adhesive Development - 2 , pp. 1
    • Hart-Smith, L.J.1
  • 20
    • 0017633289 scopus 로고
    • Stress analysis of adhesive bonded tubular lap joints
    • Adams, R. D. and Peppiatt, N. A. Stress analysis of adhesive bonded tubular lap joints. J. Adhesion, 1977, 9, 1.
    • (1977) J. Adhesion , vol.9 , pp. 1
    • Adams, R.D.1    Peppiatt, N.A.2
  • 23
    • 0030916239 scopus 로고    scopus 로고
    • Composites drive VT diversification
    • Composites drive VT diversification. J. Reinf. Plast., 1997, 41(1), 28.
    • (1997) J. Reinf. Plast. , vol.41 , Issue.1 , pp. 28


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.