An analysis of creep deformation parameters. Part 1: background

Engineering Fracture Mechanics

Volumn 71, Issue 16-17, 2004, Pages 2449-2461

  Landes, John D ^a   Schwalbe, Karl Heinz ^b  

^a UNIVERSITY OF TENNESSEE   (United States)

^b INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

Ct parameter; C* parameter; Creep cracking; Creep deformation; CTOD 5; ETM

Indexed keywords

CRACKS; DEFORMATION; ELASTICITY; PLASTICITY;

CREEP CRACKING; CREEP DEFORMATION;

CREEP;

FRACTURE MECHANICS;

EID: 2442476097     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2004.01.008     Document Type: Article

References (18)

1. Landes JD, Schwalbe K-H. EFAM ETM-Creep 03--the engineering flaw assessment method for creep. GKSS 2002/23. Geesthacht: GKSS Forschungszentrum
2. Landes J.D. Begley J.A. A fracture mechanics approach to creep crack growth Mechanics of crack growth ASTM STP 590 1976 128-148 American Society for Testing and Materials West Conshohocken, PA
3. Nibkin K.M. Webster G.A. Turner C.E. Relevance of nonlinear fracture mechanics to creep crack growth Cracks and fracture ASTM STP 601 1976 47-62 American Society for Testing and Materials West Conshohocken, PA
4. Saxena A. Creep crack growth under nonsteady-state conditions Fracture mechanics ASTM STP 905 vol. 17 1986 185-201 American Society for Testing and Materials West Conshohocken, PA
5. Schwalbe K-H. The engineering flaw assessment method (EFAM)--document EFM 96. GKSS 98/E/40. Geesthacht: GKSS Forschungszentrum
6. Hellman D. Schwalbe K.-H. On the experimental determination of CTOD based R-curves Schwalbe K.-H. The crack tip opening displacement in elastic-plastic fracture mechanics 1986 Springer-Verlag Heidelberg
7. Schwalbe K.-H. Cornec A. The engineering treatment model (ETM) and its practical application Fatigue Fract. Engng. Mater. Struct. 14 1991 405-412
8. Schwalbe K-H, Zerbst U, Kim Y-J, Brocks W, Cornec A, Heerens J, et al. EFAM ETM 97--the ETM method for assessing the significance of crack-like defects in engineering structures, comprising the versions, ETM 97/1 and ETM 97/2, GKSS 98/E/6. Geesthacht: GKSS Forschungszentrum
9. Landes JD, Dietzel W. An analysis of creep deformation parameters--part 2: Experimental study. Engng Fract Mech; in press
10. Ernst H.A. Paris P.C. Rossow M. Hutchinson J.W. Analysis of load-displacement relationships to determine J-R curve and tearing instability material properties Smith C.W. Fracture mechanics ASTM STP 677 1979 581-599 American Society for Testing and Materials West Conshohocken, PA
11. Donoso J.R. Landes J.D. Common format equation approach for developing calibration curves for two-dimensional fracture specimens from tensile data Engng. Fract. Mech. 54 4 1996 499-512
12. Donoso J.R. Landes J.D. A unifying principle for evaluating fracture toughness in the elastic and plastic regimes with planar fracture specimens Paris P.C. Jerina K.L. Fatigue and fracture mechanics ASTM STP 1360 vol. 30 2000 36-53 American Society for Testing and Materials West Conshohocken, PA
13. Saxena A. Nonlinear fracture mechanics for engineers 1998 CRC Press Boca Raton, FL
14. Kumar V, German MD, Shih CF. An engineering approach for elastic-plastic fracture analysis. NP 1931, EPRI Project 1237-1; July 1981
15. R-5, Assessment procedure for the high temperature response of structures. Issue 2, April 1996
16. Braga LM. The application of the Engineering Treatment Model (ETM) to creep crack growth. GKSS Technical Note GKSS/WW/93/8, August 1993
17. τ during creep crack growth Landes J.D. McCabe D.E. Boulet J.A.M. Fracture mechanics ASTM STP 1207 vol. 24 1994 510-526 American Society for Testing and Materials West Conshohocken, PA
18. t parameter for characterizing creep crack growth in the transient regime Nonlinear fracture mechanics: Time dependent fracture mechanics ASTM STP 995 vol. 1 1976 47-62 American Society for Testing and Materials West Conshohocken, PA