Overview of existing literature on diversity factors and schedules for energy and cooling load calculations

ASHRAE Transactions

Volumn 110 PART 1, Issue , 2004, Pages 164-176

  Abushakra, Bass ^a   Haberl, Jeff S ^b   Claridge, David E ^c  

^a MILWAUKEE SCHOOL OF ENGINEERING   (United States)

^b TEXAS A AND M UNIVERSITY   (United States)

^c Texas AandM University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BUILDING ENERGY; COOLING LOAD SIMULATION; DIVERSITY FACTORS;

AIR CONDITIONING; BUILDINGS; COMPUTER SIMULATION; ELECTRICITY; LIFT; LIGHTING; SPREADSHEETS; THERMAL LOAD;

COOLING;

EID: 2442423307     PISSN: 00012505     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (64)

1. Abbas, M. 1993. Development of graphical indices for building energy data, Masters thesis, Department of Mechanical Engineering, Texas A&M University, College Station, Tex.
2. Abushakra, B., and D.E. Claridge. 2001. Accounting for the occupancy variable in inverse building energy baselining models. Proceedings of the International Conference for Enhanced Building Operations (ICEBO), Austin, Tex., July.
3. Abushakra, B., A. Sreshthaputra, J.S. Haberl, and D.E. Claridge. 2002. Compilation of diversity factors and schedules for energy and cooling load calculations (ASHRAE Research Project 1093-RP Final Report). Energy Systems Laboratory Technical Report, ESL-TR-01/04-01, Department of Mechanical Engineering, Texas A&M University, February.
4. Akbari, H., J. Eto, S. Konopacki, K. Heinemeier, and L. Rainer. 1994. A new approach to estimate commercial sector end-use load shapes and energy use intensities. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.2-2.10.
5. Akbari, H., K. Heinemeier, P. Le Coniac, and D. Flora. 1988. An algorithm to disaggregate commercial whole-building electric hourly load into end-uses. Proceedings of the 1988 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.13-10.36.
6. Akbari, H., J. Eto, I. Turiel, K. Heinemeier, B. Lebot, B. Nordman, and L. Rainer. 1989. Integrated estimation of commercial sector end-use load shapes and energy use intensities. Final Report, Applied Science Division, Lawrence Berkeley Laboratory, University of California, Berkeley, Calif.
7. Akbari, H., I. Turiel, J. Eto, K. Heinemeier, and B. Lebot. 1990. A review of existing commercial energy use intensity and load shapes studies. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.7-3.18.
8. Alereza, T., and R. Faramarzi. 1994. More data is better, but how much is enough for impact evaluations? Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.11-2.19.
9. ASHRAE. 1989. ASHRAE Standard 90.1-1989, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
10. ASHRAE. 1991.1991 ASHRAE Handbook - HVAC Applications. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
11. ASHRAE. 1995. ASHRAE FIND, An inventory of measured energy-use databases (a diskette and a user manual). Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
12. Baker, M. 1990. Utility application of commercial sector end-use load measurements: Case studies are not good enough! Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.27-3.34.
13. Baker, M., and L. Guliasi. 1988. Alternative approaches to end-use metering in the commercial sector: The design of Pacific Gas and Electric Company's commercial enduse metering project. Proceedings of the 1988 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.28-10.41.
14. Barrar, J., D. Ellison, G. Wikler, and E. Hamzawi. 1992. Integrating engineering-based modeling into commercial-sector DSM program planning. Proceedings of the 1992 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.23-3.32.
15. Bou-Saada, T.E., J.S. Haberl., E.J. Vajda, M. Shincovich, L. D'Angelo, and L. Harris. 1996. Total utility savings from the 37,000 fixture lighting retrofit to the U.S. DOE Forrestal Building. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 4.31-4.48.
16. Bou-Saada, T.E., and J.S. Haberl. 1995. A weather-daytyping procedure for disaggregating hourly end-use loads in an electrically heated and cooled building from whole-building hourly data. Proceedings of the 30th Intersociety Energy Conversion Engineering Conference, July 31-August 41995, Orlando, FL, pp. 323-330.
17. Bronson, D.J., S. Hinshey, J.S. Haberl, and D.L. O'Neal. 1992. A procedure for calibrating the DOE-2 simulation program to non-weather-dependent measured loads. ASHRAE Transactions 98(1).
18. CBECS. 1997a. Commercial buildings characteristics 1995. Commercial Buildings Energy Consumption Survey (CBECS), Energy Information Administration (EIA), Office of Energy Markets and End Use, USDOE, August 1997.
19. CBECS, 1997b. Commercial buildings energy consumption and expenditures 1995. Commercial Buildings Energy Consumption Survey (CBECS), Energy Information Administration (EIA), Office of Energy Markets and End Use, USDOE, 1995.
20. CEED. 1995. Leveraging limited data resources: Developing commercial end-use information: BC Hydro case study. Technical Report. EPRI's Center for Electric End-Use Data (CEED), Portland, Oreg.
21. Dhar, A. 1995. Development of Fourier series and artificial neural network approaches to model hourly energy use in commercial buildings, Ph.D. dissertation, Department of Mechanical Engineering, Texas A&M University, College Station, Tex.
22. Diamond, R., M.A. Piette, B. Nordman, O. De Buen, and J. Harris. 1992. The performance of energy edge buildings: Energy use and savings. Proceedings of the 1992 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.47-3.60.
23. ELCAP. 1989. Description of electric energy use in single-family residences in the Pacific Northwest. End-use Load and Consumer Assessment Program (ELCAP). Pacific Northwest Laboratory, Richland, Wash.
24. EPRI. 1999. EPRI's southeast data exchange. Information obtained from EPRI-CEED web site. Center for Electric End-Use Data (CEED), Portland, Ore.
25. Emery, A.F., and L.M. Gartland. 1996. Quantifying occupant energy behavior using pattern analysis techniques. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 8.47-8.59.
26. Eto, J.H., H. Akbari, R. Pratt, and S. Braithwait. 1990. Enduse load shape data: Application, estimation, and collection. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.39-10.55.
27. Finleon, J. 1990. A method for developing end-use load shapes without end-use metering. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.57-10.65.
28. Floyd, D.B., D.S Parker, and J.R. Sherwin. 1996. Measured field performance and energy savings of occupancy sensors: Three case studies. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 4.97-4.105.
29. Gillman, R., R.D. Sands, and G.L. Robert. 1990. Observations on residential and commercial load shapes during a cold snap. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.81-10.89.
30. Haberl, J.S., and P. Komor. 1989. Investigating an analytical basis for improving commercial building energy audits: Results from a New Jersey mall. Center for Energy and Environmental Studies Report No. 264, June 1989.
31. Haberl, J.S., and P.S. Komor. 1990. Improving commercial building energy audits: How daily and hourly consumption data can help. ASHRAE Journal. September, pp. 26-36.
32. Hadley, D.L. 1993. Daily variations in HVAC system electrical energy consumption in response to different weather conditions. Energy and Buildings 19(1993): 235-247.
33. Halverson, M.A., J.L. Stoops, J.R. Schmelzer, W.D. Chvala, J.M. Keller, and L.R. Harris. 1994. Lighting retrofit monitoring for the federal sector-Strategies and results at the DOE Forrestal Building. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.137-2.144.
34. Hamzawi, E. H., and M. Messenger. 1994. Energy and peak demand impact estimates for DSM technologies in the residential and commercial sectors for California: Technical and regulatory perspectives. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.145-2.155.
35. Heidell, J.A. 1984. Development of a data base on end-use energy consumption in commercial buildings. Proceedings of the 1984 ACEEE Summer Study on Energy Efficiency in Buildings, pp. D-49-D-62.
36. Jacobs, P.C., S.S. Waterbury, D.J. Frey, and K.F. Johnson. 1994. Short-term measurements to support impact evaluation of commercial lighting programs. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 5.113-5.121.
37. Katipamula, S., T. Allen, G. Hernandez, M.A. Piette, and R.G. Pratt. 1996. Energy savings from Energy Star personal computer systems. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 4.211-4.218.
38. Katipamula, S., and J.S. Haberl. 1991. A methodology to identify diurnal load shapes for non-weather dependent electric end-uses. Proceedings of the 1991 ASME-JSES International Solar Energy Conference, New York, N.Y., pp. 457-467.
39. Keith, D.M., and M. Krarti. 1999. Simplified prediction tool for peak occupancy rate in office buildings. Journal of the Illuminating Engineering Society, Winter, pp. 43-52.
40. Komor, P. 1997. Space cooling demands from office plug loads. ASHRAE Journal (December).
41. Margossian, B. 1994. Deriving end-use load profiles without end-use metering: Results of recent validation studies. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.218-2.223.
42. Mazzucchi, R.P. 1992. End-use profile development from whole-building data combined with intensive short-term monitoring. ASHRAE Transactions 98(1): 1180-1184.
43. NAICS. 1997. North American Industry Classification System. Office of Management and Budget, Executive Office of the President, United States Government, JIST edition.
44. Nordman, B., M.A. Piette, and K. Kinney. 1996. Measured energy savings and performance of power-managed personal computers and monitors. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 4.267-4.278.
45. Noren, C. 1997, Typical load shapes for six categories of Swedish commercial buildings. Technical Report, Lund Institute of Technology, Department of Heat and Power Engineering, Division of Energy Economics and Planning, Lund, Sweden.
46. Noren, C., and J. Pyrko. 1998a. Typical load shapes for Swedish schools and hotels. Energy and Buildings 28(3): 145-157.
47. Noren, C., and J. Pyrko. 1998b. Using multiple Regression analysis to develop electricity consumption indicators for public schools. Proceedings of the 1998 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.255-3.266.
48. Norford, L.K., A. Rabl, J. Harris, and J. Roturier. 1988. The sum of megabytes equals gigawatts: Energy consumption and efficiency of office PCs and related equipment. Proceedings of the 1988 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.181-3.196.
49. Norford, L.K., R.H. Socolow, E.S. Hsieh, and G.V. Spadaro. 1994. Two to one discrepancy between measured and predicted performance of a "low-energy" office building: insights from a reconciliation based on the DOE-2 model. Energy and Buildings 21(1994): 121-131.
50. Owashi, L., D.A. Schifrman, and A.D. Sickels. 1994. Lighting hours of operation: Building type versus space use characteristics for the commercial sector. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 8.157-8.162.
51. Parker, J.L. 1996. Developing load shapes: Leveraging existing load research data, visualization techniques, and DOE-2E modeling. Proceedings of the 1996 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.105-3.113.
52. Parti, M., A.V. Sebald, J. Charkow, and J. Flood. 1988. A comparison of conditional demand estimates of residential end-use load shapes with load shapes derived from end-use meters. Proceedings of the 1988 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 10.203-10.218.
53. Pratt, R.G., M.A. Williamson, and E.E. Richman. 1990. Miscellaneous equipment in commercial buildings: The inventory, utilization, and consumption by equipment type. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.173-3.184.
54. Press, W.H., S.A. Teukolsky, W.T. Vetterling, and B.P. Flannery. 1992. Numerical Recipes in FORTRAN: The Art of Scientific Computing, 2d ed. Cambridge, U.K.: Cambridge University Press.
55. Rohmund, I., S. McMenamin, and P. Bogenrieder. 1992. Commercial load shape disaggregation studies. Proceedings of the 1992 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 3.251-3.262.
56. Schon, A., and R. Rodgers. 1990. An affordable approach to end-use load shapes for commercial facilities. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings.
57. Stoops, J., and R. Pratt. 1990. Empirical data for uncertainty reduction. Proceedings of the 1990 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 6.177-6.189.
58. Szydlowski, R.F., and W.D. Chvala. 1994. Energy consumption of personal computers. Proceedings of the 1994 ACEEE Summer Study on Energy Efficiency in Buildings, pp. 2.257-2.267.
59. Schrock, D.W. 1997. Load shape development, Pennwell Books. Tulsa, Okla.: Pennwell Publishing Company.
60. Thamilseran, S., and J.S. Haberl. 1994. A bin method for calculating energy conservation retrofit savings in commercial buildings. Proceedings of the Ninth Symposium on Improving Building Systems in Hot and Humid Climates, Dallas, Tex., pp. 142-152.
61. Thamilseran, S. 1999. An inverse bin methodology to measure the savings from energy conservation retrofits in commercial buildings. Ph.D. dissertation in mechanical engineering, Texas A&M University, College Station, Tex.
62. Verdi, A.M. 1989. Exploratory Data analysis of summer load profiles for small commercial customers. Technical Report. Department of Civil Engineering and Operations Research, Engineering and Management Systems Program, Princeton University, Princeton, N.J.
63. Wall, L.W., M.A. Piette, and J.P. Harris. 1984. A summary report of BECA-CN: Buildings energy use compilation and analysis of energy-efficient new commercial buildings. Proceedings of the 1984 ACEEE Summer Study on Energy Efficiency in Buildings, pp. D-259 - D-278.
64. Wilkins, C.K., and N. McGaffin. 1994. Measuring computer equipment loads in office buildings. ASHRAE Journal (August).