Modified styrene-butadiene-styrene block copolymer as compatibiliser precursor in polyethylene/poly(ethylene terephthalate) blends

Polymer Degradation and Stability

Volumn 90, Issue 2 SPEC. ISS., 2005, Pages 211-223

  Coltelli, Maria Beatrice ^a   Della Maggiore, Irene ^a   Savi, Stefania ^a   Aglietto, Mauro ^a   Ciardelli, Francesco ^a  

^a UNIVERSITY OF PISA   (Italy)

Author keywords

Block copolymers; Compatibility; Functionalisation; PET; Polyethylene; Polymer blends; SEBS

Indexed keywords

CATALYSTS; EXTRACTION; MOLECULAR WEIGHT; POLYETHYLENE TEREPHTHALATES; POLYMER BLENDS; STYRENE; VISCOSITY MEASUREMENT;

COMPATIBILITY; FUNCTIONALIZATION; POLYETHYLENE; SEBS;

BLOCK COPOLYMERS;

EID: 24144487424     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2005.03.016     Document Type: Conference Paper

References (39)

1. T.L. Carté, and A. Moet Morphological origin of super toughness in poly(ethylene terephthalate)/polyethylene blends J Appl Polym Sci 48 1993 611 624
2. M. Penco, M.A. Pastorino, E. Occhiello, F. Garbassi, R. Braglia, and G. Giannotta High impact poly(ethylene terephthalate) blends J Appl Polym Sci 57 1995 329 334
3. W. Loyens, and G. Groeninckx Ultimate mechanical properties of rubber toughened semicrystalline PET at room temperature Polymer 43 2002 5679 5691
4. W. Loyens, and G. Groeninckx Rubber toughened semicrystalline PET: influence of the matrix properties and test temperature Polymer 44 2003 123 136
5. A. Ajji, and N. Chapleau Structure and properties of impact modified polyethylene terephthalate J Mater Sci 37 2002 3893 3901
6. Z.-Z. Yu, M. Lei, Y. Ou, and G. Yang On compatibilization and toughening of a copolyester with a maleated thermoplastic elastomer Polymer 43 2002 6993 7001
7. C.P. Papadopoulou, and N.K. Kalfoglou Comparison of compatibiliser effectiveness for PET/PP blends: their mechanical, thermal and morphology characterization Polymer 41 2000 2543 2555
8. F. Pazzagli, and M. Pracella Reactive compatibilization of polyolefin/PET blends by melt grafting with glycidyl methacrylate Macromol Symp 149 2000 225 230
9. R. Jeziorska, and W. Zielinski Filled grades of chemically modified poly(ethylene terephthalate) Macromol Symp 169 2001 97 102
10. I. Fortelny, D. Michalkova, and Z. Krulis An efficient method of material recycling of municipal plastic waste Polym Degrad Stab 85 2004 975 979
11. F. Avila, and M.V. Duarte A mechanical analysis on recycled PET/HDPE composites Polym Degrad Stab 80 2003 373 382
12. K.P. Chaudari, and D.D. Kale Impact modification of waste PET by polyolefinic elastomer Polym Int 52 2003 291 298
13. M. Aglietto, M.B. Coltelli, S. Savi, F. Lochiatto, F. Ciardelli, and M. Giani Post-consumer polyethylene terephthalate (PET)/polyolefin blends through reactive processing J Mater Cycles Waste Manag 6 2004 13 19
14. Aglietto M, Savi S, Coltelli MB, Della Maggiore I, Bruni C, Sorace G, et al. Post-consumer polyethylene-poly(ethylene terephthalate) compatibilized blends. CD Proceedings international solid waste association (ISWA) world environment congress, session 1A; 2004.
15. L.W. Jang, K.H. Lee, D.C. Lee, J.S. Yoon, I.J. Chin, and H.J. Choi Alternating copolymers as compatibiliser for blends of poly(ethylene terephthalate) and polystyrene J Appl Polym Sci 78 2000 1998 2007
16. N.K. Kalfoglou, D.S. Skafidas, J.K. Kallitsis, J.C. Lambert, and L. Van der Stappen Comparison of compatibiliser effectiveness for PET/HDPE blends Polymer 36 1995 4453 4462
17. Y. Pietrasanta, J.-J. Robin, N. Torres, and B. Boutevin Reactive compatibilization of HDPE/PET blends by glycidyl methacrylate functionalised polyolefins Macromol Chem Phys 200 1999 142 149
18. A. Sanchez-Solis, F. Calderas, and O. Manero Influence of maleic anhydride grafting on the rheological properties of polyethylene terephthalate-styrene butadiene blends Polymer 42 2001 7335 7342
19. G.H. Hu, and H. Cartier Styrene-assisted melt free radical grafting of glycidyl methacrylate onto an ethylene and propylene rubber J Appl Polym Sci 71 1999 125 133
20. 13C NMR spectroscopy Polymer 43 2002 2591 2594
21. F. Ciardelli, M. Aglietto, E. Passaglia, and G. Ruggeri Molecular and mechanistic aspects of the functionalisation of polyolefins with ester groups Macromol Symp 129 1998 79 92
22. E. Passaglia, P. Siciliano, F. Ciardelli, and G. Maschio Kinetics of the free radical grafting of diethyl maleate onto linear polyethylene Polym Int 49 2000 949 952
23. E. Passaglia, L. Corsi, M. Aglietto, F. Ciardelli, M. Michelotti, and G. Suffredini One step functionalisation of ethylene-propylene random copolymer with two different reactive groups J Appl Pol Sci 87 2003 14 23
24. 4 catalyzed reactions during reactive blending of polyethylene (PE) and poly(ethylene terephthalate) Macromol Mater Eng 289 2004 400 412
25. J. Reignier, B.D. Favis, and M.-C. Heuzey Factors influencing encapsulation behavior in composite droplet-type polymer blends Polymer 44 2003 49 59
26. D.J. Ihm, and J.L. White Interfacial tension of polyethylene/ poly(ethylene terephthalate) with various compatibilizing agents J Appl Polym Sci 60 1996 1 7
27. A. Gonzalez-Montiel, H. Keskkula, and D.R. Paul Impact-modified nylon 6/polypropylene blends:1. Morphology-property relationships Polymer 36 1995 4587 4603
28. G.-M. Kim, G.H. Michler, J. Rosch, and R. Mulhaupt Micromechanical deformation processes in toughened PP/PA/SEBS-g-MA blends prepared by reactive processing Polymer 49 1998 88 95
29. M. Heino, J. Kirjava, P. Hietoja, and J. Seppala Compatibilization of polyethylene terephthalate/polypropylene blends with styrene-ethylene/butylene- styrene (SEBS) block copolymers J Appl Polym Sci 65 1997 241 249
30. J.H. Lepers, B.D. Favis, and R.J. Tabar The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends J Polym Sci Polym Phys 35 1997 2271 2280
31. J.-C. Lepers, B.D. Favis, and C. Lacroix The influence of partial emulsification on coalescence suppression and interfacial tension reduction in PP/PET blends J Polym Sci Polym Phys 37 1999 939 951
32. J.-C. Lepers, B.D. Favis, and S.L. Kent Interface-property relationships in biaxially stretched PP-PET blends Polymer 41 2000 1937 1946
33. E. Passaglia, S. Ghetti, F. Picchioni, and G. Ruggeri Grafting of diethyl maleate and maleic anhydride onto styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer (SEBS) Polymer 41 2000 4389 4400
34. D.-M. Fann, S.K. Huang, and J.-Y. Lee Kinetics and thermal crystallinity of recycled PET. II. Topographic study on thermal crystallinity of the injection-molded recycled PET J Appl Polym Sci 61 1996 261 271
35. R.R. Gallucci, and R.C. Going Preparation and reactions of epoxy-modified polyethylene J Appl Polym Sci 27 1982 425 437
36. F.P. La Mantia, R. Scaffaro, C. Colletti, T. Dimitrova, P. Magagnini, and M. Paci Oxazoline functionalisation of polyethylenes and their blends with polyamides and polyesters Macromol Symp 176 2001 265 278
37. M. Mathew, and S. Thomas Compatibilisation of heterogeneous acrylonitrile-butadiene rubber/polystyrene blends by the addition of styrene-acrylonitrile copolymer: effect on morphology and mechanical properties Polymer 44 2003 1295 1307
38. F. Pilati G. Allen Comprehensive polymer science, 17: polyesters 1989 Pergamon Press Oxford 275
39. P. Marèchal, R. Legras, and J. Dekoninck Molecular weight segregation induced by interfacial melt reactivity in polyamide 6/reactive rubber blends J Polym Sci Polym Phys 33 1995 1895 1906