Combined shear and compression analysis using a modified Iosipescu shear test device. Experimental studies on dry wood

Holzforschung

Volumn 59, Issue 5, 2005, Pages 539-545

  De Magistris, Federica ^a   Salmén, Lennart ^a  

^a INNVENTIA AB   (Sweden)

Author keywords

Compression; Density; Picea abies; Shear stress; Wood

Indexed keywords

CELLS; DEFORMATION; FINITE ELEMENT METHOD; HONEYCOMB STRUCTURES; MATHEMATICAL MODELS; SHEAR STRESS;

COMPRESSION LOAD; SHEAR FORCES; SHEAR LOADS; WOOD CELLS;

WOOD;

DENSITY; MECHANICAL TREATMENT; PICEA ABIES; SHEAR TESTS; SIMULATION;

PICEA ABIES;

EID: 24044537318     PISSN: 00183830     EISSN: None     Source Type: Trade Journal    
DOI: 10.1515/HF.2005.089     Document Type: Article

References (24)

1. Adams, D.F., Walrath, D.E. (1987) Further development of the Iosipescu shear test method. Exp. Mech. 27:113-119.
2. Ando, K., Ohta, M. (1995) Variability of fracture toughness by the crack tip position in an annual ring of coniferous wood. J. Wood Sci. 45:275-283.
3. Bansal, A., Kumosa, M. (1995) Application of the biaxial Iosipescu method to mixed-mode fracture of unidirectional composites. Int. J. Fract. 71:131-150.
4. Bergander, A., Salmén, L. (2000a) The transverse elastic modulus of the native wood fibre wall. J. Pulp Pap. Sci. 26: 234-238.
5. Bergander, A., Salmén, L. (2000b) Variations in transverse fibre wall properties: Relations between elastic properties and structure. Holzforschung 54:654-660.
6. Bodig, J., Jayne, B.A. Mechanics of Wood and Wood Composites. Van Nostrand Reinhold, New York, USA, 1982.
7. Carrington, H. (1923) The elastic constant of spruce. Philos. Mag. 45:1055-1057.
8. Conant, N.R., Odom, E.M. (1995) An improved Iosipescu shear test fixture. J. Compos. Technol. Res. 17:50-55.
9. De Magistris, F., Salmén, L. (2003) Combined shear and compression analysis using the Iosipescu device: Analytical and experimental studies of medium density fiberboard. Wood Sci. Technol. 37:509-521.
10. De Magistris, F., Salmén, L. (2004) Deformation of wet wood under combined shear and compression. In: Proceedings of the 2nd International Symposium on Wood Machining. Vienna, Austria. pp. 75-82.
11. Dumail, J.F., Olofsson, K., Salmén, L. (2000) An analysis in rolling shear of spruce wood by the Iosipescu method. Holzforschung 54:420-426.
12. Farruggia, F., Perré , P. (2000) Microscopic tensile tests in the transverse plane of earlywood and latewood parts of spruce. Wood Sci. Technol. 34:65-82.
13. Grédiac M., Pierron, F., Vautrin, A. (1994) The Iosipescu in-plane shear test applied to composites: A new approach based on displacements field processing. Compos. Sci. Technol. 51:409-417.
14. Hibbit, Karlsson & Sorensen. ABAQUS Standard User's Manual. Version 6.3. Hibbit, Karlsson & Sorensen Inc, Rhode Island, USA, 2001.
15. Holmberg, S. (1998) A numerical and experimental study of initial defibration of wood. Doctoral thesis. Division of Structural Mechanics, Lund Institute of Technology, Sweden.
16. Iosipescu, N. (1967) New accurate procedure for single testing of metals. J. Mater. 2:537-566.
17. Jernkvist, L.O. (2000) On the fracture behaviour of softwood. Doctoral thesis. Division of Solid Mechanics, Luleå University of Technology, Sweden.
18. Koponen, S., Toratti, T., Kanerva, P. (1991) Modelling elastic and shrinkage properties of wood based on cell structure. Wood Sci. Technol. 25:25-32.
19. Liu, J.Y. (2000) Effects of shear coupling on shear properties of wood. Wood Fiber Sci. 32:458-465.
20. Liu, J.Y., Flach, D.D., Ross, R.J., Lichtenberg, G.J. (1999) An improved shear test fixture using the Iosipescu specimen. Mech. Cell. Mater. 231:139-147.
21. Persson, K. (2000) Micromechanical modeling of wood and fiber properties. Doctoral thesis. Division of Structural Mechanics, Lund Institute of Technology, Sweden.
22. Sjödahl, M. (1995) Electronic speckle photography applied to inplane deformation and strain field measurements. Doctoral thesis. Division of Experimental Mechanics, Luleå University of Technology, Sweden.
23. Tongli, W., Aitken, A.N., Rozenberg, P., Carlson, M.R. (1999) Selection for height growth and Pilodyn pin penetration in lodgepole pine: Effects on growth traits, wood properties, and their relationships. Can. J. For. Res. 29:434-445.
24. Walrath, D.E., Adams, D.F. (1983) The Iosipescu shear test as applied to composite materials. Exp. Mech. 23:105-110.